Drivers/Hardware :: Moving AVI Files To External Drive / Drive Not Recognized And Lost All
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Similar Messages:
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Oct 16, 2015
Why I do this is unimportant. In Win 7, when I move my daily backup files (2 weeks worth about 20gb) from my current BU folder to my save BU folder, the move took a couple of seconds (I think because only the file pointers were changed.) Under Win 10, it takes in excess of 2 hours (I think there is a physical move of file data.) This is my third try since installing Win 10 on my (admittedly slow) server. Will renaming the files work?
View 13 Replies
Jan 27, 2015
I installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?
View 9 Replies
Aug 14, 2015
It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.
View 9 Replies
Aug 30, 2015
Windows 10 did an update on my wife's desktop that was incompatible with the Nvidia graphic drivers on it. As a result, the dual monitors no longer display. We took the computer to the local Microsoft store and they were fully aware of the problem and are working on it. But, after two weeks, the problem has not been solved. Meanwhile we bought a new desktop and had Microsoft empty the entire contents of the C: drive onto an external hard drive. They did and showed me that the external drive contained the root directory and program data that contains years of work using Lightroom.
I brought the external hard drive home and connected it. Luckily I can see the User Libraries but not the Program Data. Is there some way that I can make everything visible in the external hard drive so that I can copy the contents to the new desktop?
View 9 Replies
Jan 11, 2016
If I do a fresh install. What are some safe online sites I can back up my files? Drop box or one drive?
View 9 Replies
Feb 3, 2016
I have recently upgraded to Windows 10 and alll is working well except for the CD/DVD drive does not automatically recognise a CD when its inserted. With previous Windows 7 when I put a music CD in drive wiith itunes open then itunes would ask if i wanted to import CD.
The CD/DVD is recognised in Device Manager and says that it is working properly. the only way I can get the CD to be recognised after inserting the CD is by going to the Device Manager and double clicking the CD/DVD line to open 'properties'. At that point itunes asks me if i want to import.
The drive is a Samsung SH-223L.
Autoplay is ON
View 2 Replies
Feb 10, 2016
The DVD drive worked fine prior to installing Win 10 - now the computer doesn't recognize it. Win 10 apparently thinks it is a removable drive. The CD-DVD drive is recognized in BIOS.
How do I diagnose the problem?
View 9 Replies
Feb 1, 2016
My dvd player drive isn't listed and when you try and play a dvd the player spins but doesn't play anything since upgrading to windows 10. I have checked in device manager and it says device is working properly. I have also done the upgrade driver and it says I have the latest driver.
View 2 Replies
Jul 30, 2015
I have a SATA-1 TSSTcorp TS-H653 (not sure whether it is an F, G, H etc.) CD/DVD writable drive in an Inspirion 537s. I recently upgraded to Windows 10 Pro from Windows 7 Ultimate, but the drive is not recognized by the OS. However, the drive does show up in BIOS. I have searched and cannot find a driver for this drive.
View 9 Replies
Oct 15, 2015
I just 'upgraded' to Windows 10 yesterday from 7. Windows 7 has a generic photo upload program that activated when I hooked the camera up. Windows 10 does not recognize my camera in G drive.
Is there a generic program available to upload photos? Samsung support says they do not support Windows 10.
View 3 Replies
Sep 10, 2015
Previous Win 7 did recognise apple equipment so that I could download photos to the desktop but although I tunes syncs with my phone and pad, win 10 will not show them in explorer. How can I download pics without using the cloud?
View 1 Replies
Jul 31, 2015
I just upgraded to Windows 10 as I planned to use the weekend to sort out any issues I might encounter during the upgrade. Well boy did I ever. My Seagate 3TB drive decided it no longer wanted to be recognized by Windows anymore. It shows up as a failed/deactivated drive in Disk Management as seen here: [URL] It also shows up in Speccy as a physical drive. I currently have 2TB of data on there (including an OS image I did just before the upgrade as an extra prep step), so reformatting the volume is not an option until I get the data off.
View 9 Replies
Oct 6, 2015
I just trashed my old computer and built a new one (moved from Windows 7 to Windows 10). I had quite a few files I wanted to keep, so I stored them all on an external hard drive. I can play the video files in question from the external hard drive, but when I try to copy the files to my internal drive (so that I can store my external safely) the transfer rate quickly drops to zero and then after a few seconds a pop up tells me that the file cannot be found. I know this to not be true since I can still play the files.
View 1 Replies
Dec 9, 2015
I plugged in the hard drive from my wife's PC into my own PC (both windows 10) so I could try to recover some files from it (as it's currently not booting into windows).As soon as I booted my PC back up I could see the second hard drive was there but since then I've been experiencing all sorts of issues. I am still an administrator but I just don't seem to be able to do anything - it's hard to describe, but I can't move or change or delete ANY files or folders on my system, I can't move files to or from an external drive for back up, on the desktop the right click menu doesn't come up at all and on files/folders it has no ability to access properties.
Also, whilst most programs still open normally, any Microsoft Office programs just don't do anything at all when clicked on. It's as if I have lost all control over making any changes on my PC.I assumed that the two drives were conflicting in some way so removed the second drive but the problems are still there.
View 1 Replies
Dec 21, 2015
In the past few days my external hard drive makes the sound (windows notification) like when I unplug it from my desktop. Then about 5 seconds later I get another sound and notification asking me how I would like to view content for G: (my external hard drive). I only have it attached to use for backups and I've checked my back up program (easeus) and my backups haven't been happening either. I used crystaldisk to check it and it's healthy. Why it would be essentially shutting itself off and on?
View 9 Replies
Sep 26, 2015
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
View 9 Replies
Nov 17, 2015
I noticed I have a corrupted directory on my external drive and whenever I use FreeFileSync to backup my data, it flags it:
How to delete this unwanted directory? Every time I try to delete it, I get this:
View 2 Replies
Jan 14, 2016
I have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
View 4 Replies
Feb 10, 2016
I purchased a 1TB hard drive to place media files on it so that I could plug it into my DVD player which has a USB port. I made sure to format the hard drive to Fat32. What I can surmise is that the 1TB hard drive is too big for the DVD player to read. I plug it in and it says Device Not Supported. But I've successfully plugged in an external card reader and used a 16GB SD card to place files on and it reads them fine. So I'm thinking it's the size of the drive that is the issue.
I might have to partition the hard drive into two partitions. One partition 16gb and then the other partition with whatever is left. They did say they were not sure if there was a way to set it up so the 16gb Partition is what is recognized first when plugged into the DVD player. This way I would transfer movies I want to watch to the 16 GB partition, and transfer them over.
Now when I search hard disk partitions in Windows 10 the manager comes up and I can see the hard drive, but I can not change the size to partition it. It's grayed out. Is there a freeware program that works with Windows 10 that will split the hard drive into two partitions in sizes I specify, and make sure that the 16GB partition is the first one loaded or seen? And if I set it up that way when I plug it into my computer will the computer see both partitions?
View 8 Replies
Feb 10, 2016
I'm trying to change the name of my External Hard Drive as it appears as Local Disk G on my laptop. However, upon trying multiple times it keeps on coming back as Local Disk G.
View 9 Replies
Feb 10, 2016
I have an external hard drive and when i try to open it, it says access denied.. when i try to see the ownership, it says unable to determine owner.
When i try to change the ownership through various methods like cmd prompt take own or by going to the properties of the drive, it says unable to set new owner, access is denied...
View 2 Replies
Feb 10, 2016
My external hard drive is showing an error.
G: is not accessible.
The disk structure is corrupted and unreadable.
How to fix it without formatting it? Have a lot of file on there that I'd like to recover if possible.
View 6 Replies
Oct 24, 2015
I have a Seagate FreeAgent GoFlex Desk 2TB USB 3.0 external hard drive that I use to store (majority) videos and documents. A few days ago it started giving me this error for every folder and file, and eventually just from trying to access the hard drive itself from This PC:
And this is what shows up in Device Manager:
In Disk Management, this is what shows up at first (first image) and then when I refresh Disk Management through Action > Refresh (second image):
As for specifications wise, I clean installed to Windows 10 Pro N x64 (a day after this error came up when I plugged in the hard drive, actually... Not sure what I was thinking at the time) with what I think are updated drivers for my hardware from the manufacturer's websites. Previously, it was a clean installation of Windows 10 Pro x64 after upgrading from Windows 8.1 Pro x64.
Not sure if this is worth mentioning, but, all my folders and files show up when the computer actually can read the hard drive, I just can't open any of them. I've never had to deal with hardware problems before. I really don't want to lose the files in that hard drive, as I'm not able to make a backup even if it was working (with it being my biggest external to date).
This is what the hard drive shows on Speccy at a glance:
(Is the serial number and firmware version supposed to be the same on all hard drives? )
View 9 Replies
Dec 12, 2015
Early on in the Windows 10 update process, I was able to upgrade an HP Stream 7 and a Stream 11 to Windows 10. Both had the same 32GB RAM and nominal 32GB eMMC as the Stream 14 I am wrestling with. Both came to a point where they told me the device had insufficient space on its C: drive. In both instances I selected an external Micro SD drive, and off it went with the upgrade.
In this instance I cannot get past that point. I select the external drive (a 320GB external USB spinner) but it doesn't accept that or any other external device I offer it.
When I click "Refresh" it says that it needs 10GB on C: drive, and eventually says that the upgrade failed.
The computer has been wiped, and reset to factory spec for W8.1 with all updates installed. It has ~20GB on C, and 7GB in another partition, so even if I find a way to remove the partition it wont be enough.
I'm about to have to give up on this thing and just make the poor user run with W8.1 until further notice, how to get past this point.
View 1 Replies
