Drivers/Hardware :: New Install - Hard Drives Show Up As Removable
Jan 10, 2016
I just completed an update installation on a desktop PC running Windows 7. Now my hard drives show up as removable drives.
Normally this is due to the need to install an AHCI driver. And that is normally the Intel Rapid Storage Technology Driver for Intel chipsets. The driver was installed in Windows 7.
Is this a case where I need to manually install a new IRST Driver for Windows 10? If so, should I uninstall the existing first, or will the new one overwrite the old?
View 1 Replies
Similar Messages:
Nov 21, 2015
Yesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
View 2 Replies
Jan 21, 2016
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
View 3 Replies
May 12, 2015
I am wondering what the best way is to install windows 10 on multiple harddrives, so that the OS is my SSD, the programs are on a HDD, and the user files are on another HDD. Any way to do this and it has worked successfully could you say that the windows 7 method works.
View 9 Replies
Nov 16, 2015
Why my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
View 3 Replies
Aug 9, 2015
Ok, I thought this was just bitlocker stuff but its all removable drives.
When I connect a removable drive I don't get a notification banner. I get a sound and the notification goes straight to Action Center instead of showing the banner. I've gone in and disabled and renabled all the notifications, Ive made sure both "Banner" and "Sounds" are enabled for everything, but still nothing.
When I get an email in Outlook I get the banner like I'm supposed to, others programs like Logitech Gaming Software are also showing banners, so it seems like a device connection thing at the moment.
View 1 Replies
Dec 26, 2015
I updated a few machines from 10240 to 10586 (upgrade).
I usually like to have my desktop icons on the toolbar instead of the screen (like to see full theme).
Now the funny thing is that if I decide to show desktop on toolbar sometimes removable drives and even all hard drives will show on desktop toolbar but not on screen.
Here is a pic showing that removable drive is not on desktop.
Now look. If I set desktop to toolbar. Removable drive is there. (Orange circle around it) Some users see all their drives (Fixed and removable) on desktop toolbar but not on screen.
View 4 Replies
May 13, 2015
I have installed Windows 10 on a new clean hard drive because the old one with Windows 8 died but the new one with Windows 10 wont show any wireless connections. By the way the computer I'm typing on is Windows 10.
View 1 Replies
Aug 24, 2015
How to ungroup and separate removable drives in This PC?
it shows removable drives, optical drives and hard drives in one group together. This is one of the the worst changes made to Windows. Sadly, the OS does not offer you any option to the ungroup drives logically so local drives are in one group and the rest in another.
View 1 Replies
Dec 10, 2015
How do i stop 10 from adding any USB removable drives (a second time, since they're always show in MyPC which i have expended)?
View 9 Replies
Jun 15, 2015
Getting ready to move from Win 7-64 to Win 10-64 when 10 is available next month. It's my understanding that Win 10 will not install over Win 7 so I'd like to install a new 250Gb SSD (I currently have Win 7 on a 128Gb SSD as C: ) for a clean install on it. Once all my files & software are transferred I'll keep the current 128Gb SSD as an extra drive.
So, are all SSD Hard Drives created equal? I'm looking at NewEgg & the prices are all over the place. My current SSD is a Cruicial 128Gb which has worked 4 yrs flawlessly.
View 9 Replies
Dec 22, 2015
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
View 2 Replies
Dec 5, 2015
I have multiple hard drives on my machine with a power switch between the PSU and drive itself. None of these drives are boot drives except the drive that holds the OS. Yet, W10 will not see any of these drives just by turning on the power switch. I have to switch on the HDD, and then go through the whole startup process to get W10 to see it. External USB drives are seen straight away. I don't understand why this is as I can see no difference between this system, and switching on external eSATA drives on my old W7 machine which always worked OK ?
View 5 Replies
Jun 1, 2015
This morning I downloaded windows 10. Installed and all that only to find that I couldn't connect to the Internet. I have a belkin USB adapter that allows me to connect wirelessly. The PC didn't recognize it and would not connect. So I connect my dvd drive again so I could reinstall the driver. Now the PC doesn't even show my dvd drive. So I cannot install the software and the it won't connect through Ethernet. I went to the store hoping to find a PCI express card so I could just slap it in and be connected. Walmart didn't carry the item so found this usb to Ethernet thing.
View 1 Replies
Jan 8, 2016
I was under the impression that I was going to have a hard drive failure and purchased a new hard drive and cloned windows to it. it turned out my drive is fine, so I would like to use the drive as a second drive in my system.
if I just plug it in, will my computer boot from the now C: drive or will it boot from the second drive, since it is a bootable drive?
Or can I plug it in after it booted up?
it is installed and the power is connected, but the data cable is not.
I gave my C: drive a name so I can find it in file manager and don't format the wrong drive when I plug in the second drive.
View 5 Replies
Feb 23, 2016
I'm running Win10 64bit. My sig has all my system details.
I use 2 SSD's and 1 internal HDD.
Issue 1: My internal 2TB HDD is displayed in Device Manager as Portable Devices. This HDD hosts my User's Folders.
Issue 2: I have an external HDD which is a USB3.0 compatible. When it's connected to a USB3.0 port, the LED on the HDD is blue, and if it's USB2.0 the LED is white.
When I wake up the PC from Sleep mode, the HDD doesn't return to USB3.0 status, instead it's LED is white. Unplugging and re-plugging, won't work. I'll have to reboot the PC to get it back to USB3.0
GIL-PC-Fri_12_02_2016_213655_86.zip
View 9 Replies
Feb 10, 2016
When I use the "Safely Remove Hardware and Eject Media" icon/tool, to remove a USB stick, my internal SSD drive shows as a choice to be removed. How can I get the SSD off this list?
In Device Manager, under Disk Drives, looking at the SSD drive's properties there is no "Removal Policy (i.e. choice of "Quick Removal" or "Better Performance") like the removable hard drive on my laptop has.
View 9 Replies
Jan 24, 2016
I have an Epsom A810 printer, connected to desktop PC by USB.
The printer has a USB port for loading pictures to the printer from a thumb drive. Thing is, this port makes the printer show up in Disk Management and My PC as a removable drive.
But it is not a drive at all. I can't access the files on the thumb drive through the printer, so it functions as a phantom drive.
Any method to stop Windows from recognizing the printer as a removable drive?
View 9 Replies
Aug 4, 2015
I am really missing the ability to easily see how much storage space is left on each of my drives. Why is this not easily seen just by opening "This PC" like it was in Windows 7. It seems like I have to click on properties in order to see disk usage.
View 6 Replies
Aug 20, 2015
There is an icon in my tray to "Safely remove hardware and eject media". It is always there (even when no USB devices are plugged in) because Windows thinks my second internal SSD is removable.Is there a config setting or a registry edit to fix that?
View 6 Replies
Jul 28, 2015
I have 2 computers (asus and acer) that came with Windows 7 Home. The product keys are on the side of the computers. The hard drives have been wiped and are blank. How can I update to Windows 10? My guess is I have to download and install Windows 7 with the keys on the computer and then update, but where can I download a copy of Windows 7 from?
View 4 Replies
Jul 29, 2015
OK so i have two computer one is a home computer and one is a gaming computer. On the home computer it is getting the free windows 10 upgrade. On my computer used for gaming its not because i am running a un-legitimate copy of windows. So my question is can i swap the hard drives so i can have a legitimate copy of windows 10 for my gaming computer?
View 1 Replies
Feb 10, 2016
There is no drive assigned. I wonder what it refers to? I've checked the registry but can't figure it out. How would I remove it?
View 1 Replies
Nov 15, 2015
I have two computers both now running Win 10. One is hard wired to my router, and the other is on wireless. I am not using Homegroups....just the old method of work groups, which used to work pretty well. (I also have some XP computers.) The computer on wireless can see the C drive on the hard wired computer, but not vice versa. I shows the C drive but when I click on it says it can't be accessed. I have set all the permissions for the C drive on that machine, giving full access to "everyone". I went to the Security tab and set the parameters to allow access for authenticated users. (When it runs through the files it frequently hangs with an error message, but continues when I hit return.)
View 3 Replies
Sep 16, 2015
Since upgrading from 7, none of my hard drives are listed. The entire category is missing, all I see are Folders. The drives are there and accessible if I explicitly navigate to them, such as "C:", in which case my path becomes: > This PC >SYSTEM (C:), and I can explore the drive. They are all properly listed in Disk Management, where I can choose to open an explorer folder on them. The ones configured as shared still appear on the network. But none of several internal and external drives are listed in This PC.
View 3 Replies
Oct 4, 2015
I recently have noticed that windows 7 and I just upgraded to windows 10 via the free upgrade, will not show all my hard drives ? On start up they show for a few seconds then go away. Both are WD. One is 500 gb, and the other is a new 1TB. I am not sure when this started but noticed it just recently when I tried to access my pictures on the 500gb drive. I have tried just about everything here with no luck. The 500gb drive does have a windows vista OS on it but the 1 TB is just for back ups etc. All was fine some time ago but now, all I see is my SSD with my OS and an external drive. Also the Hard Drives do show up in Bios. I might have found a reason this happens. Most likely on a windows and / or driver update. On my system the drivers for these missing Hard Drives you can see them in device manager by selecting view / show hidden devices.
View 1 Replies
