Drivers/Hardware :: No Sound Through Headphones
Dec 30, 2015
Sound comes through perfectly fine on my laptop's built-in speakers. However, when plugging my headphones into the 3.5mm headset jack, there is no sound whatsoever. The system recognizes that my headset is plugged in. In fact, the microphone on my headset functions perfectly when plugged in, but the headphones themselves are outputting no sound.
I tested the headphones on other computers and devices, and they work. In Device Manager, the device is listed as "Realtek High Definition Audio". However, the only sound device listed in Control Panel is "DTS Audio Control Panel".
I've tried uninstalling the audio device from Device Manager, and then reinstalling the driver from Realtek's website. However, this is met with the exact same results... no sound through the headphones, and "DTS Audio Manager" is installed in the Control Panel instead of Realtek HD Audio Manager.
If I navigate to Control Panel -> Sound -> Playback, "Headphones" is not listed as a device. Instead, Speakers/Headphones is listen as the sole device. Also, I ran DirectX Diagnostic Tool, and it returned absolutely no errors.
Model: HP ZBook 17 G2
OS: Windows 10 Pro 64-bit
View 5 Replies
Similar Messages:
Feb 10, 2016
I have an HP laptop, and my sound card is (displayed using PCIutils for Windows):
Code:
Intel Corporation 7 Series / C210 Series
and I am finding difficulties in getting stereo sound from analogical headphones (plugged in with 3.5mm jack). Drivers downloaded from HP or Realtex do not work, drivers supplied by Windows (although they are Realtek drivers as well) sometimes work, I mean: speakers and headphones are shown together at the mixer, and sound from headphones is not stereo. I then go to device manager, audio input and output, and uninstall "Speakers/ Headphones". I then reboot with my headphones plugged in, and, after that, the sound is stereo, and (IIRC) the mixer distinguishes between headphones and speakers.
But then things get broken back soon: one time, the windows updated the sound driver, and no stereo sound again. I uninstalled the device, rebooted, and stereo back. Then I unplugged the headphones, and windows said that no speakers were found: I restarted the audio device, speakers were found again, but stereo broken again.
View 1 Replies
Nov 19, 2015
I have a laptop - Asus GL551JW-DS71.
My speakers work fine but when I plug in my headphones, I can't hear any sound from the headphones. The headphones do work as I use them for my desktop.
I have tried updating the sound drivers from the device manager.
I have tried removing the drivers and redownloading the audio drivers from Acers website.
I have tried 'installing' audio driver with the default windows 10 audio driver instead of the realtek one.
I have tried adjusting the sample rate in the advanced properties tab.
What can I do to get sound working in my headphones again and not just the speakers.
View 4 Replies
Dec 8, 2015
I have Realtek Audio HD driver for sound installed on windows 10. For about a week, my laptop ran with no problems. However, last night there was no sound output into my headphones. I unplugged my headphones, plugged them in again. Still no sound.
I tried my headphones on different computers and phones and sound worked normally. I then tried a different pair of headphones on my laptop and no sound was coming out. The speaker is still functioning normally.
I have since restarted my laptop multiple times, and each time I restart a message saying that "You have changed your settings in BIOS setup. Would you like to restart your computer to apply these changes?"pops up.
Sometimes, my headphones somehow come to life, and sound is able to be played. However, when this occurs there is a lot of background static noise, although the sound quality itself is very good.
View 1 Replies
Mar 16, 2016
Today, I reset my computer after struggling to get Kaspersky Internet Security reinstalled. After the reset, I was able to get it installed, but I have run into another issue (surprise, surprise). Sound does not output through headphones as it should.
The drivers are up to date (IDT High Definition Audio Codec and AMD High Definition Audio Device) as they should be. Windows even detects that my headphones are connected, but sound does not go through them unless I use the sound control panel to test the audio. Look at the screenshots for further details. It lists my headphones as the default communication device, and where it lists the speakers/HP option, it lists that as the default device. I cannot list the communication headphones as the default device, only default communication device.
Audio works through the speakers. Audio goes through the speakers even with headphones connected. The only time audio comes through the headphones as it should is when I test audio through them in the control panel. The headphones work just fine, and this issue did not exist before I reset my computer.
Headphones not connected:
Headphones connected:
Device Manager:
View 1 Replies
Nov 13, 2015
Yesterday Windows 10 updated and now my Aune T1 Mk2 USB DAC is no longer working. It shows up in the device manager and is recognized and the audio is switched to be playing through it, however there is not sound whatsoever in my headphones. I have tried a different pair of headphones and there was no change, still no sound.
View 1 Replies
Oct 19, 2015
After a successful upgrade from Windows 7 to Windows 10 I discovered that YouTube would not play. Fixed the video problem by running in compatibility mode .. BUT then noticed there was no sound from either speakers or headphones on my laptop. No Windows sounds, iTunes, nothing worked. Could this be a setting inadvertently turned "off' somewhere ? Up until I got YouTube working the sound was fine with Windows 10. I just don't know where to look to rectify this. Rebooting etc doesn't make any difference. I don't suspect a hardware fault, it must be an OS corruption or something.
View 3 Replies
Feb 3, 2016
I have sound from the speakers, but not from the headphones.
I've tried the headphones on my phone and they work, so it is the PC.
It's like the headphone jack doesn't work, but I have suspicions that it's about the drivers.
In the sound settings/playback devices, the speakers appear, but not the headphones.
View 1 Replies
Mar 26, 2016
My default configuration is powered speakers connected via the optical output on the ZXR. So in control panel, the S/PDIF is my default device. I'd like to be able to also switch to headphones without having to change control panel sound settings. Is there a configuration that enables me to do this? It seems as if I can't have the s/pdif output my default if I want to use headphones. I'm on Windows 10 with latest software updates.I switched to using the analog outs from the ZXR and not taking advantage of the D/A converters built into my powered speakers (Vanatoo). Not the optimal situation, but it allows me to switch from speakers to headphones without having to go through Control Panel gyrations.
View 1 Replies
Feb 10, 2016
So last time I Disabled the head phones in the Sound>Playback device list and after that I couldn't see them on this list anymore (Even when checking Show Disabled Devices) I already tried Updating the Driver in Device Manager>Sound,Video and Game controllers>(HeadPhones)>Properties>Driver and it still didn't work , I also tried Re-Installing them from computer and Restarting the Computer and nothing worked. I don't have any panel jack Disable front detection option in Realtek HD Audio Manager
I'm on Toshiba Laptop, Windows 10 and using Logitech G930 HeadSet. No hedphones nor microphone are enabled , and i can not change it.
View 2 Replies
Jan 14, 2016
I have tried both front and rear inputs and still no success. My PC won't recognize my headphones being plugged in. They're headphones with a USB and 2 jacks (speakers and mic), and when plugged in the green light is active on the headphones showing their working/have power. Changing the connector to a solo jack, I can plug it into my PS4 / iPhone and it works fine. However on my PC it doesn't work, despite it working completely fine for 2 weeks until 2 days ago.
I've tried going to device manager and updating drivers, and I've also tried managing audio settings and making it my default device but the PC is not picking up the headphones exist, even after ticking Show Disabled Devices. In device managers, the headphones aren't under "Sound, video and game controllers", "Audio inputs and outputs", or "Unknown Devices" (as I have no Unknown Devices menu). I do not have RealTek Audio Manager. These are the solutions that worked for most people but not myself.
The events that led to this error was last night I was trying to watch a film but my TV (which is my monitor) speakers weren't working. After updating sound drivers and realising they were for some reason disabled, I re-enabled them and they worked fine. However, disabling them again does not fix the problem. The PC does not pick up the headphones at all, mic or sound. I do believe that it is an issue with the newest drivers I installed after upgrading to Windows 10 three days ago. The headphones worked fine on Windows 10, but I believe the issue is with the new drivers I installed to make my TV speakers work.
View 9 Replies
Oct 8, 2015
I started up my laptop a while ago to play some music while I do work but when I plugged in my headphones there was no music. The music plays on the speakers but headphones nothing.... I have tried many headphones on my laptop and none worked but they do work on my iPod. I am using Asus Zen Book pro UX501, windows 10 64 bit....
View 2 Replies
Aug 18, 2015
In windows 7, when headphones were plugged into the jack on the front of the machine it would automatically switch to the headphones and mute the speakers. If you unplugged them, it would enable the speakers. How would I go about enabling this on Windows 10?
View 2 Replies
Nov 15, 2015
I upgraded my Lenovo W530 running Win7 Pro 64 bit to Windows 10. After the upgrade I can no longer connect to my bluetooth headphones which worked before the upgrade. The bluetooth radio is on. When I click Connect in the Action Center it shows that the headphones are connected but they are not. The headphones (actually my hearing aids) play a notification sound when a bluetooth connection is made and I never hear that sound. If I play music the sound goes to the speaker, not my headphones. I have removed the headphones and repaired them. I have checked that all of the bluetooth device drivers are up to date in Device Manager.
View 5 Replies
Nov 19, 2015
I am having audio problems that I have been unable to resolve. My pc specs and problem below. So since I upgraded to Windows 10 one of the biggest things that annoys me is when I plug in headphones they are not picked up by my pc and I have to manually switch to them as default audio using the Playback devices menu. On Windows 7 I had a Audio Control panel that popped up and detected the headphones.
I am also having issues with the volume sounding low throughout and terrible call quality on skype not sure if this is a separate issue, I have tried manually updating, removing & reinstalling the audio drivers from the device manager and also tried downloading the realtek windows 10 drivers. None of these have seemed to work, I have tried software that detects out of date drivers to no avail and also made sure other components on my pc are updated incase this somehow worked.
PC Specs :
POWER SUPPLY - atx power supply stp 650watt
MOTHERBOARD - asus P8B75-M LX
Ram - 8GB
CPU - Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
GPU - NVIDIA GeForce GTX 660
Harddrive - 1TB Operating
[Code] ....
View 9 Replies
Aug 15, 2015
I recently updated to Win 10, and the first thing I noticed was that the sound settings were weird. Both speakers and headphone sounds work perfectly fine, but they don't automatically switch when I plug/unplug the headphones. I have to manually go into sound and set one device or another to default.
View 9 Replies
Dec 23, 2015
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
View 1 Replies
Oct 16, 2015
I just bought this sound card and installed drivers for Windows 10. (and a crapton of bloatware with UI of Win XP media player...)
Everything works well except one thing: when I change the sound (or mute) I don't see Windows 10 volume bar. I mean these:
The sound itself changes, but there is no indicator. Is there a way to fix that?
View 1 Replies
Jan 26, 2015
I just installed the most recent windows 10 tech preview last night; but my sound blaster pci express sound card did not get installed correctly or something because i am getting no sound at all. I roll everything back to the old setup.
View 9 Replies
Aug 29, 2015
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 Replies
Jan 19, 2016
There used to be a sound option in my taskbar like everyone remembers, but I had recently installed X-Split and that is the last time I remember seeing it there. I have been on the forums and Google looking for answers but everything I find tells me to go to the settings and hit enable all. This was already checked off but even trying to select individual tasks it's not there.
Need to restore the option, volume is stuck at 37% and can't change it so I've had to use my neighbor's DJ equipment just to watch netflix at something I can hear.I went one setting down to Turn system icons on/off and sound is greyed out can't adjust that.
View 1 Replies
Oct 5, 2015
I am currently using Windows 10 and I notice that my Realtek High Definition audio does not have a "sound enhancements tab" how do I add this feature?
View 1 Replies
Feb 10, 2016
I was looking at a video on youtube, didn't do anything, all of a sudden the sound goes out. I make sure nothing on youtube is muted and it wasn't. So I right click my "SPEAKERS" icon (I'm wearing headphones) I click SOUND, then I click the SOUND tab, and the "test" icon is greyed out, meaning I can't click it. I haven't had sound in 3 days and nothings muted.
View 1 Replies
Feb 2, 2015
Since going from Win8 to Win10 tech preview I have had to increase my volume a lot more than before to hear anything. Volume issues with Win10?
View 9 Replies
Aug 7, 2015
I installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
View 6 Replies
Mar 5, 2016
I have a fresh install on my PC and for some reason it doesn't detect my headphones, I've plugged them in the front and rear and still no luck, all drivers and software are up to date, They did use to work before the fresh install.
View 6 Replies
