Drivers/Hardware :: No Audio Enchantment Options For Sound?
Jan 31, 2016
Model: Lenovo z50-70
OS: Windows 10 64bit
Drivers: Conexant smart audio HD
The picture below pretty much sums up my problem, in all previous versions of windows i have had this tab enabled with various options to further enchanement any sound i hear with my headphones.However, it seems dolby has it's own horrible version (unless im using it wrong) as a headphone user i find the sound to be a lot worse in quality with dolby's enchancments, in fact when i switch it off the sound is way better.
I installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
I just upgraded my ASUS Laptop from Win 8.1 to Win 10 X64. (It has Via HD Audio)
Initially, sound worked but the microphone didn't. I fussed with many settings but nothing seemed to work.
I uninstalled and reinstalled the drivers, then the mic seems to work but sound doesn't.
Some of the events that I have encountered are: One message said "Windows has detected that Audio enhancements for the following device are causing problems". I disabled all enhancements but nothing changedBased on other posts, I tried to change the default format to 16 bit and other Hz. Nothing worked.I tried to play a test tone in the speaker setup and got the message "Failed to play test tone".I tried to update the drivers but was informed that I had the latest drivers
I went to the VIA web site to look for new drivers but there are none listed for Win 10.
Is there something else that I can do or is it just a matter of waiting for new VIA drivers? (VIA HD Audio is such a common audio chip that I find it hard to imagine that VIA and Microsoft haven't solved the driver problem - particularly given the Insiders Hub process!)
It seems that there are constant issues with windows 10 and sound blaster sound cards like mine. I have a sound blaster x-fi titanium pci express sound card and every time i turn off my speaker controller(unit with volume and adjustments for sub, center and rear speakers); then turn it back on after awhile; it gives me a high pitched hum noise and the audio comes out all garbled and crackling.
So I just updated my Toshiba laptop from Windows 8.1 to Windows 10 and now I'm having audio problems. At first after I upgraded I had no sound. I fixed it by uninstalling and reinstalling my Realtek audio driver. Now I got my sound back, but now whenever I play audio the sound isn't clear anymore Especially when I use YouTube. I updated my Realtek audio driver from version 6.0.1.7541 to 6.0.1.7586 and I still hear the buzzing! I tried audio troubleshooting and it said the problem couldn't be identified. What do I do?
I recently reset my windows 10 then I got problem my laptop can't produce sound so I can't hear sound from it the speaker logo in the task bar have x mark and when clicked it opens troubleshooter then windows can't find the trouble. I also uninstall and reinstall my audio driver, Realtek High Definition Audio and NVIDIA High Definition Audio, but nothing change this is frustrated me I need sound to play games, watching films, and watching youtube, so anyway I need sound to make my life harmony. One thing the screenshot (Windows+Prt Sc) also won't save the picture only dimming few second then I couldn't find the pictures.
I have homebuilt core i7 930 running an asus p5 premium. Whether I use onboard sound (realtek), sound blaster pcix titanium, or sound blaster omni usb, I get strange behavior where the sound will drop out while I'm watching a tv app (hdhomerun, or kodi as well), or listening to music.. at random times, could be 5 minutes, could be 45 minutes. To get the sound back, if I click the speaker icon and click the bar that plays the windows ding, it plays (a little crackly during the first few milliseconds, then clear, like it's waking up) and then sound plays normally until this happens again. So it's propagating through multiple different drivers. I read somewhere that audio devices can sleep (I suppose laptops mainly? Maybe I read it wrong).
Every time I reboot it seems I lose my audio on my sound blaster x-fi titanium pci express sound card. Also; it seems like every time I turn my audio controller off for awhile then back on; i get at high pitched hum sound and then when i try and play something I get crackling audio. What the heck is up with windows 10 and these issues? Ive never had these problems with my sound card under windows 7.
So I've just recently upgraded to windows 10 from windows 8.1 and for the most part I have no audio. A few seconds after I started windows 10 I was able to get very low quality audio for about 5 seconds and then it just stopped working. (using mpv with a FLAC file) The only place that the audio works is the realtek audio manager sound test. I've tested other headphones with the computer and they haven't worked either. I've also tested my headset with other devices and it works fine. I've updated windows and installed the latest realtek audio divers and nothing except for the the sound test works. (I'm using an MSI z87 GD65 btw)
My laptop does not want to recognise the sound card/audio driver that are built into it. The fun part is this just happened. Audio played yesterday, and the time before that, and even before the upgrade. The only thing that has changed (or at least is the biggest change i can think of) is downloading and installing Cygwin (sans audio packages). In trying to play a song on the new microsoft Groove, i get this;
Further inspection in the playback devices, the only two options are the Speakers/Headphones and communications Headphones, the former of which i can only assume is my actual computer speakers (otherwise its completely gone!).Looking at the device manager, everything seems okay. All the drivers are up to date so im not sure what could be wrong there?
Its Windows 10 pro (upgraded from Win7 Pro) and the computer is a Dell Precision M4600. (I am pretty sure the audio driver is in the device manager image).
I'm having an incredibly frustrating issue with my sound where it randomly, for no reason that I can find,- stops working completely. I've reinstalled my audio drivers, ensured they're up to date, I've run chkdsk's and done just about everything short of a reinstall, but no dice.
When the audio breaks, spam-disabling and re-enabling the speaker in Playback devices will occasionally solve it for a few more minutes before it eventually breaks completely again, forcing me to reboot. This happens every once every 20-40 minutes, with no pattern or any trigger that I've been able to find.
The bars in the volume mixer are still moving as if sound is playing, the in-built Windows 10 audio troubleshooter can't find any problems, and my music player keeps playing music etc. as usual. The only indicator that the sound has stopped working (beyond the obvious lack of sound) is that youtube videos get choppy and start stuttering.
Here is what my Device Manager shows in sound and audio; [URL] .... Note that disabling/enabling High Definition Audio and Realtek Audio in various combinations does nothing to fix the issue.
Here's my dxdiag log [URL] .... I'm using Windows 10, and my motherboard is an Acer FMP55
I installed window 10 today and cannot play any CDas there is no sound. DVD picture is fine but no sound. My computer is a Dell PC 260 and has AMD 6450 card. I tried very hard to make it work. I don't where the problem is. I had window7 before and had no problem with any thing.
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
I got mine with everything installed. So if I uninstall and reinstall Realtek, I might mess this up more. I don't even know what version I have and I can't understand the terms used in the instructions.
Should I just wait for a system update form Microsoft. Or do I really have to uninstall my audio software?
My audio seems to not be working. I have never had this issue with this computer before until 2 days ago. I was able to roll back my system to an older date which fixed it for about a day. This time, however, it did not get the same results.My audio is just...well... gone. The sound (lower right corner in the task bar) says it is muted. When I click the icon it brings me straight to a troubleshoot, which we all know never actually fixes the problem.
The driver is installed and before I get asked if I have done the un-install and re-install, yes I have.I have un-installed and re-installed close to 6 times now. I have gone into the services and restarted (stop and start) the windows audio service close to 12 times.
Due to my audio working when I rolled back the system before, I assume my sound card is fine, but the software is not working properly (despite what the device manager says). I have also updated my system to windows 10 from windows 8.1, yet the issue remains.
I have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.
This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.
I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?
Everytime I do something like open a new tab/website, or click on something that has to load, my audio on whatever I'm listening to lags and has that loud buzz sound.
This lag/buzz sound happens randomly when I listen to things on youtube without clicking on things too.
I have not been able to get audio out of any programs (vlc, spotify, games etc.) The only program that seems to produce sound is my web browser. Inb4 my sound is not muted.
I just installed the most recent windows 10 tech preview last night; but my sound blaster pci express sound card did not get installed correctly or something because i am getting no sound at all. I roll everything back to the old setup.
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
