Drivers/Hardware :: No Bass With Dolby Digital Plus
Aug 16, 2015
I did a clean install to Windows 10, because upgrading it break the WiFi connectivity.
Now I got another issue, I noticed that the Audio Driver downloaded from Windows Update is somehow didn't sound good, if I enabled Dolby the bass is drastically reduced like no bass at all. I tried with headset and a small sound system, they both sound like a laptop speaker. The old driver couldn't be installed, the installer always failed.
I tried to use the same driver for windows 10 from another lenovo product with no different. It is not a big deal because I'm using a USB Headset. What matter is when I use a sound system to play music/movie the sound really bad. The solution for now is to disable Dolby but the sound is really low. I would like to know is there is a way to install the old driver to Windows 10 at least?
My sound card is Conexant SmartAudio other spec can be found in Sytem Spec and the installed driver version is 8.66.4.0.
When I play music through my laptop speakers, it plays well with bass but when connect and earphone or headphone to my audio jack, the music quality decreases and the bass of my headphone has extremely low bass. I don't know if it has to do with me updating to windows 10. I'm not sure. I have REALTEK HD AUDIO DRIVE.
Just upgraded to win 10 but cant find how to get windows to bitstream dolby sounds to my amp? media player classic still works fine and the amp shows dolby digital or dts ma etc when playing suitable films. but the amp only shows pcm when using windows media player, even the dolby demo for edge only shows pcm. Same issue with the netflix app, only pcm when dolby + soundtrack is selected?
PC sound, when I play music from for example spotify the sound drops when the bass hits and after the bass the audio turns up again. Its very annoying especially when I play games. I have tried with different equalizer programs but it doesn't work.
Few weeks ago i got Brand new Windows 10 Installed on my Pc and i had Dolby Sound System installed together with my laptop on windows 7 and after i upgraded i noticed that sound got very weak and so i tried to find that dolby system equalizer and i coudnt find it just a buttom to turn it on and off. It was so much better on Windows 7 because i had possibilities to manage all sound settings and everything how i wanted, but now i can only turn it on and off. So i wondered is there any program that can raise the sound or give some sort of boost because listening to music now its just terrible.
I have an Acer Aspire M5 581-T ultrabook which is integrated with dolby home theater. it was working perfectly fine. But after my upgrade to WIn 10, it is not working properly. Dolby profile selector is not visible in the notofications area no matter how much I enable it in the settings and when i manually open the app from control panel it doesnt work(not turning on or off). It only works from properties tab within speakers. when its working, the profile selector doesnt work and changing the profiles and equalizer makes no difference( doesnt work). what can i do to make it work?
When inserting camera disk to computer, Windows 10 will not open. Is there a special driver or update I need to make this work? It worked just fine on Windows 7.
I am switching to an ssd soon but my W10 key is a digital entitlement. I was given an iso of W10 from windows tech support in case I ever needed to reinstall W10.
If I install W10 using the iso that is now on a flash drive (media creation tool) to a brand new ssd, will the digital entitlement key be transfered as well, or will i have to purchase a copy of W10?
I have a digital tv hooked up to my laptop via HDMI and windows 10 doesn't detect it. But when I go into AMD catalyst it sees it. What am I doing wrong?
Bought Windows 10 Pro from an authorized dealer and successfully installed then activated Windows 10 on a standalone PC with the Activation key that came with the CD.
With that same CD I installed Windows 10 on a Laptop I had as well, (an additional machine). Could not activate because the key was already being used on the standalone. Okay fine....went to Windows Store and bought another key...arrrrg. The laptop activation was successful "Windows 10 on this device is activated with a digital entitlement"
So what happens if my Laptop goes south, crashes and burns lets say. I re-install Windows 10 with the CD I have, how is that Digital Entitlement I just bought for the Laptop, going to be applied? Or remembered? Surely I'm not going to have buy another...
When I installed Windows 10 upgrade I was pretty happy about how it ran.However, when I had finished a day of photography I went to download the pictures onto my computer, but Win 10 couldn't recognise Jpeg's or an other graphic extension such as raw.
When I connected my camera to the computer Win 10 did recognize the camera, so it's not a hardware issue.
Since upgrading to Windows 10 I have been unable to download photos from my mobile (not a smartphone just a Nokia with keypad) and my Sony camera. I always use one of the USB slots on my PC or a dongle on my desk which is attached to the PC and I keep getting a message saying it doesn't recognise the source. I am completely at a loss as to what to do next.
Why can't I view video anymore on Facebook and other videos since downloading Windows 10? - videos appear green or like digital scrambled on Facebook now...
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
I have a driver that loads late in the boot process. On every boot, the Win 10 boot process is interrupted about half way through by the "Found new Hardware" notification sound. It then continues to boot normally with no errors.Is there a log file that states the drivers that are loaded, and the time they loaded? If not, is there a 3rd party software that can give me that information like the old Dr Watson?
I figure the hardware driver making the "new hardware" sound is probably the last one to load, and I can find which one it is by observing the time it loads.I have unplugged every USB and other peripheral device with no luck. I have no flags in Device Manager, even the hidden devices have no errors.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
It used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.