I've added a Linux live disk (ISO) to a USB drive using Rufus & changed the UEFI so all the USB boot options are the preferred ones. My laptop still does not see the USB during boot (also the light on the USB drive stays off as if it's receiving no power).
View 5 RepliesI have a folder structure (see below) that is created after upgrade from W7 to W10. In my previous question a day ago it was confirmed that it could be used for creating W10 installation media. So I don't want to repeat how it was created. It was created automatically and it is 3GB in size.
My question: I burned files and folders to DVD using native W10 burn files to disk method. The disk is not bootable. The structure on the root of the disk is exact as in Windows folder on the pic. Did I miss the option for making it bootable? Or it should be bootable just by burning the content to DVD?
Since windows 10 has been launched and it has already been downloaded on my PC and installed. I wanted to know how to create a boot-able DVD so that I can also install it later, you know like doing a completely fresh installation and having the windows staying activated. Cuz windows was upgraded to 10 from 8.1 and Microsoft didn't gave me any key, so if I install it again on the same device will it remain activated?
View 1 Repliesis there any bootable file manager out there because I want to do the following things before installing Windows.
1. Format my C: drive with Windows 7.1
2. Move contents from my F: drive to C:
3. Install Windows 10 of F:
This is basically because F: is my old hard disk and I want to install Windows on it.
Had tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti).
Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before swapping GPU.
Followed all the steps on the Dell site - but afterwards - it acts like my hard drive has died (doubting this - have fairly new Samsung 512GB SSD as the only hard drive).
Computer boots into Bios now - but says "inaccessible boot device". My son had done the update from Windows 8 that came on the machine to Windows 10 - but apparently did not create a boot disk or USB drive.
Can I create a "generic" bootable USB on another computer - WITHOUT REINSTALLING WINDOWS? I do not want to lose info/settings on his machine if at all possible.
Waiting on Alienware Tech support to respond - machine is about 2.5 years old and out of warranty
I have downloaded all ISO images of Windows 10 through Media Creation Tool. Each ISO image is consisted on both versions (x86 and x64) of respective windows.
Now, I want to convert all Windows 10 ISO images in a single bootable USB in a way which will give me the list of selection of installation windows 10 at the time of installation.
My gamer Laptop (ASUS G55VW ROG) is now upgrated from Windows 7 SP1. It went smooth and without errors.Before fiddle around too much I want to make a bootable USB-key with Windows 10 installaion to make a clean install possible if I mess windows up so it can't boot.But how do I make this bootable USB-key? I know I can "reset" the PC from "settings", but that only works if it can boot .I had the understanding, that it would be possible to make a DVD or an USB-pen to make a clean install? And what about cd-key when cleaninstalling from that bootdevice?
View 4 RepliesI have been using windows 7 ultimate for more than 2 years and now I want to upgrade to windows 10. My friend recommended a clean install, gave me an iso for windows 10 enterprise, tell me to use a program called rufus and referred me to this tutorial
My question is: Is it better do a clean install or simply upgrade from the built-in windows update tool? Then, if I should do a clean install, is rufus the suitable tool for making bootable usb?
I've searched on Google how to make a USB bootable to install windows files. I'm planning to buy Win10 CD, but my PC DVD drive is dead (making an annoying noise during startup). so is there anyway to make USB bootable to install windows files?
View 1 RepliesClick on the video to see the tutorial [URL] ....
View 12 RepliesI bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
View 1 RepliesIt won't let me mark as active in the disk manager. And I need to make it bootable so I can dual boot. Do I need special permissions to make the other partition bootable?
View 3 RepliesI bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
View 1 RepliesCan you create a bootable usb from the free windows 10 upgrade for a new pc build? If so, How?
View 1 RepliesPossible to Create a Bootable USB for Win. 10 on OS X Yosemite?And if so, how?
View 1 RepliesWhen I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop.
2.Windows will start up to the login window and then freeze.
3.Computer will start, have a blank screen, but still have mouse that i can move.
4.Computer will start with error "hard disk (3f0)
Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
I would like to do a clean install I have downloaded windows10 .iso free version file from creation tool to DVD is the file bootable. If not how do I make a bootable DVD or USB from the downloaded.
View 9 RepliesTried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
View 3 RepliesMy computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
Does Macrium or other common/good backup/clone package can take an existing good bootable SD Card and clone it to a fresh one? do they need to be exact matches [brand/speed/size] or near-proxy?
View 9 RepliesAfter the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.
I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me.
I got myself a new 120GB SSD for the jump to Windows 10. I install the OS without problems from a DVD disk, boot up and begin to install stuff as steam, spotify and GeForce experience.
I remove the installation disk from my DVD reader and reboot. After the BIOS screen I get a message that claims there are no bootable media.
With the installation disk in the DVD reader everything works fine, I get an option to boot the installation even though the DVD is nr 2 in boot order after my sole storage unit.
I have tried to use all those bootrec commands to restore, repair or create a new bootmgr and so on. No installations of Windows can be found either. Been doing this for 6 hours now. I have reinstalled windows 10, 8 and 7. All with the same problem.
I plugged in one of my older 60GB SSDs and successfully installed Windows 10 on it. No sign of any boot problems. Booted without the installation disc. Same SATA connection on the motherboard. No changes in boot order.
So my thoughts about this right now, is it possible my new SSD have a defect from the beginning? Something in the hardware/hardware controller?
And yes I have searched around and Everyone seems to get it working with bootrec commands. I don't...
It's possible you might have the contents of the ISO but not the actual ISO image itself on HDD.It's still possible to create a bootable USB using purely MANUAL commands for this example assume Disk nr is 7 and the USB stick is on drive H. The files from the ISO are in say folder WINDVD on drive E here's what to do.
1) open CMD as administrator
2) DISKPART
3) LIST DISK
4) SELECT DISK 7 (remember our example above)
5) CLEAN
6) CREATE PARTITION PRIMARY
7) ACTIVE
8) FORMAT FS=NTFS QUICK
9) EXIT (don't close the cmd prompt though)
10) CD E:WINDVDBOOT (again from example contents of ISO are on drive E)
11) BOOTSECT /NT60 H:
12) After 11) finishes - takes 1 sec approx. copy the entire contents of directory WINDVD to the USB stick as is - copy contents in same folder layout as on the disk - don't have WINDVD as the high level - copy CONTENTS so ist folder on USB stick will be BOOT.
13) now you've got a bootable USB.
I upgrade my system with new motherboard Gigabyte gaming 5. All other parts used before and works fine. And now forks everything accept when I restart my computer then it shows no bootable device. But if I shut down it and start up manually then it works. How to fix that? I have windows 10
View 1 RepliesI am going to be installing an ssd into my laptop in the coming days and I am planning on using the windows 10 set up program to create a boot-able usb for installation. My laptop came with Windows 8 pre-installed and I updated it to Windows 10. If I do a fresh install to the ssd, will Windows recognise my PC and activate itself?
View 1 Replies