I have a Lenovo G50-45 Windows 10 Professional 64-bit with a 64-bit AMD A8-6410 APU processor laptop.<br>I somewhy only have 5GB of ram usable when I have 6gb DDR3. I have unchecked maximum memory in msconfig, and have set the number of processors to 4, but still nothing.
View 6 RepliesDid a clean install of Windows 10 in 64 Bit and now on my properties it only says 4GB of Ram are usable instead of the full 8GB. (Pic Attached)
I had never seen this before and I did have Win10 installed after upgrading from 8. Decided to do a clean install because it had been a while.
My laptop has 2GB RAM but only 1.7 GB usable, can I get the remaining 0.3 GB?
View 4 RepliesI have recently upgraded to Windows 10 Home from Windows 7 Home. And I replaced my 4 RAM sticks with 8 GB RAM but my system shows : Installed memory (RAM): 8.00 GB (3.23 GB usable).
View 9 RepliesI just noticed this. I never had this problem under Windows 8.x. Checked my BIOS and everything looked good. IGPU is turned off. Setting the memory in msconfig Boot|Advanced doesn't work.
View 9 RepliesI've just installed my windows 10 and since it was running slow on a 2gb ram, I decided to buy a 4gb stick on my 32bit system. Long story short, it only shows 2.2gb usable. 768mb(or something close to that figure) is reserved for the videocard but I think I still should have 1gb more. Ive tried the unchecking the maximum memory and didn't work. I've tried all possible solutions that I could find on the net yet no progress. Except for one, which is updating the BIOS, of which I am particularly bad at trying to figure out how. Anyway I'll just attach some of my computer information ....
View 9 RepliesIn System Information it shows that I have 64-bit Operating System. Why is it showing only 4 GB of RAM is usable, out of 6 GB available? And how to enable it to fully use the whole 8 GB? Because I had in stalled 8 GB of RAM to this machine.
However, when I went to check by myself, by right-clicking on 'This Computer' icon and selecting Properties. Under system, it says that I have x64 based processor, and 64-bit OS installed. Here, you can also see that I have highlighted that there's 6 GB of RAM available, but only 4 GB usable.
And this here is a snipped screenshot from 'System Information, well, it also says here that I have 64-bit version of the OS.
I have a laptop, and have 4 GB of ram installed.. but only 3.85 Usable.. never had such thing.. my other laptop have 8GB and its fully usable while my desktop has 16GB and its fully usable? why does such thing happen?
Specs: i5 2410m 2.30Ghz
4GB ram
Windows 10 home 64Bit
Nvidia GT520m
it is an Acer laptop
Just installed my new RAM and took a look at system to see that I only have 4 GB usable out of the 12 installed. I've done everything I thought of and nothing has worked. Why this could be?
View 2 RepliesIts says i have 16 gigs installed but its only using 8 ....
View 1 RepliesWindows 10 is showing only 3.9gb usable while i have 8gig of ram installed on my system.
View 1 RepliesUpdated to the latest 10 update last night and Edge is almost unuseable. Takes about 5-10 minutes for the computer (esp Edge) to unfreeze and start playing nice.
View 6 RepliesWhy can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 RepliesJust like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 RepliesI have been installing and reinstalling windows 10 through bootcamp 6 on El Captain on my Macbook Pro.
But i keep getting the same result - the speakers and right click option are missing.
Where i can download drivers for Windows 10 on bootcamp 6 or what other way to resolve this issue.
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 RepliesI have a driver that loads late in the boot process. On every boot, the Win 10 boot process is interrupted about half way through by the "Found new Hardware" notification sound. It then continues to boot normally with no errors.Is there a log file that states the drivers that are loaded, and the time they loaded? If not, is there a 3rd party software that can give me that information like the old Dr Watson?
I figure the hardware driver making the "new hardware" sound is probably the last one to load, and I can find which one it is by observing the time it loads.I have unplugged every USB and other peripheral device with no luck. I have no flags in Device Manager, even the hidden devices have no errors.
Unfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 RepliesIt used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
View 3 RepliesI just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!
I'm having quite a bit of trouble removing the generic bluetooth drivers that Windows installs for you. Those have to be gone if I want to install Toshiba Bluetooth Stacks, which I need in order to use my Wii U Pro Controller in my computer. I've gone through a few methods to try this out and all have failed.
I started out by simply uninstalling the drivers on the device manager (or whatever it is called in English). Didn't work, as the drivers were back when I had to plug in my dongle to complete the installation for TBS. When I tried this in Windows 7, it worked flawlessly, yet in Windows 10 this method did not work.
Afterwards, I tried deactivating the forced driver signature, as well as make it so Windows Update doesn't automatically download any drivers it finds suitable. On top of this, I traveled into the INF folder of my Windows folder to do steps that Microsoft recommended: rename bth.inf to bth.inf.old and bth.pnf to bth.pnf.old. With all this, it should in theory work right? Nope, it didn't. Not even after a reset.
My last attempt involved unplugging my PC from the Internet as a first step, followed by everything else listed above and then a reset. The drivers were still back, bth.inf and bth.pnf somehow magically appearing in my Windows folder when I have no Internet access. I'm at a loss as to what I'm supposed to do.
Windows 10 should find new drivers through the update mechanism, which doesnt work always though. And if you go into device manager and click on a device and do a look for new drivers, it always finds new ones with a high chance. But it' just stupid to click all 100 devices single through. Isnt there a smart way to do this? Why isnt there an option for search and download all devices drivers.
View 7 Replies