Need to install a printer driver from a cd but have a message : action blocked and have to contact admin. i m the admin and. the pilote is not on Samsung web site. how can unblock the config of win. 10 to be able to insall the driver.
View 1 RepliesI recently installed Windows 10. When I connect my HP 1102 printer and try to install the driver the system tells me its been blocked by the administrator because its unsage. My user profile says I am the administrator. How do I unblock the driver (tell the system its safe?)
View 4 Replieswhy my print spooler keeps shutting off since i loaded W10. I have a HP ENVY and have tried to run both printers that worked prior to the install. Both work on the other laptop that isnt running W10.
View 3 RepliesTried to set up my Canon CP720 photo printer today. Canon say they have no drivers available, found one on Cnet which I downloaded to old laptop still on Vista but when I try to install it using 10 it says that this version of windows cannot download a printer driver.
View 2 Repliesi've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
Both these things are happening. I am getting these Windows error messages when running games, or 3D applications.
View 1 RepliesThe issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.
Steps taken:
* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this.
* Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.
Do I need to reinstall my drivers after resetting my PC?
View 3 RepliesWhen I install modem MMX310G 3G USB MANAGER in windows 10, it shows driver installation failed and when open this app it shows no devices.
View 2 RepliesJust upgraded but now my second monitor isn't working and when i go to update my driver i get this
View 8 RepliesSo I tried to update from Windows 8 to 10 last week. That didn't work for me, so I had to format everything and install Windows 10 afterwards. At first neither W-LAN nor LAN would work. Then I un- & reinstalled the W-LAN driver so now everything's fine except for my ethernet connection.
- Adapter is enabled
- I have un- & reinstalled the driver multiple times (even tried compatability mode, since some sites state that the latest version for AR8161 only supports win 8)
- I was about a thousand times in the properties menu of the ethernet adapter
The full name of the adapter is "Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
I just ran diagnostics on the ethernet adapter and after trying to fix some network protocols Windows prompted me with this. So I tried to fix this by entering
Code:
Dism.exe /online /Cleanup-Image /StartComponentCleanup
Code:
sfc /scannow
Code:
Dism /Online /Cleanup-Image /RestoreHealth
Code:
sfc /scannow
In cmd which sadly didn't do the trick. Neither did entering
Code:
netsh int ip reset c:
esetlog.txt
in cmd (admin ofc) after editing the permissions for the "26" folder in HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Nsi/{eb004a00-9b1a-11d4-9123-0050047759bc}
So the group "everyone" has "full control".
I am still stuck here w/ the "One or more network protocols are missing on this computer" -problem.
This is not exactly win 10 specific question, i had same problem in win 7, but now that i'm on win 10, that problem is still there. Here's what's going on:
I have high-end gaming PC with GTX 980 and 4k monitor and 1080p monitor as secondary.
4k Monitor is connected via DisplayPort and other monitor is using HDMI
Both of those monitors have built-in speakers (actually i don't think 1080p monitor has speakers)
But here's the problem, windows 10 keeps automatically installing HDMI audio drivers and 50% of the time when i boot my system, all my software defaults to the stupid HDMI sound.
This is extremely annoying and i'm about to pull my hair out over this. All my media players default to monitor audio, even tho windows does not select it as "default device".
Also even tho other monitor doesn't have speakers, system still thinks that the monitor has speakers and sets it as audio device.
Also when i record gameplays using shadowplay or other recorder, lot of times there's no audio on videos, because screen recorders also default to that dumb hdmi audio. I can't be bothered to check audio every time i do something.
I really need a way to tell windows 10 to STOP doing that. Here's what i've done so far:
1. under playback devices, i have DISABLED both of the monitors as playback devices.
2. I have tried uninstalling + disabling drivers for both monitors in "device manager"
3. i used local group policy to force windows not to install drivers (gpedit.msc > administrative templates > system > device installation), then i grabbed the group ID from device manager and entered it there to prevent windows from installing drivers for any audio groups.
After step 3, drivers were not installed, but windows still shows both monitors in "playback devices", only difference is that in device manager it says that this device does not have drivers installed, but they're still showing up in "playback devices", therefore all my software is STILL able to use them as playback and some of my software, like winamp, still defaults to them.
Forgot to mention, that if I disable both of them in playback devices, windows automatically re-enables them at some point. probably at boot, but i can't be bothered to check every few seconds, i just want windows to STOP trying to tell me what's best, i like my Asus STRIX 7.1 headset + 7.1 Hi-Fi home theater speaker system, i don't need some tiny jurassic stereo speakers lol.
I want to punch whoever made this feature. I mean .. what kind of an caveman would buy high-end gaming PC with GTX 980 + 4k monitor and NOT have a proper sound card + headset? Did those low-brainers in microsoft seriously think that anyone using high-end gaming PC, would like to use HDMI as primary audio? that's just ridiculous!
I think my only option is to force windows to think that i'm not using HDMI so it won't even detect my monitors as audio devices, is that possible.
I've repeatedly attempted this, but always get "An error occurred during setup. Restart your computer, then run setup again". This is an all too typical message you can find associated with many Epson products.
I've tried:
-Clean boot
-Safe mode (install enabled)
-Using an Epson removal tool I finally obtained after my 5th chat with Epson.
-An Epson fix deleting temp folder and looking for setup.exe that never appeared.
-Manually removing all Epson folders and registry entries I can find.
-Disabling firewall and AV
The same CD installed ok on my 6 year-old laptop (both run Windows x64).
I've run SFC /Scannow - ok
At best, the scanner is recognised as being connected when plugged in, and appears with a yellow trangle under 'Other Devices' in Device Manager.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 Replieshow can i use the Note quick action in the action center ?when i click it it says that i must install a app for that, i click ok but the store does not open.I manually installed a note app but it still shows the same message.
View 1 RepliesAuto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
View 6 RepliesI want to change the three finger action on my laptop touchpad. I have win 8.1 driver synaptics driver installed. The three finger gestures can't be changed, only enabled or disbaled. Now, the gestures do the forward and backward navigation on left/right three finger swipe and pageup and pagedown action on up/down swipe. I want to change the up/down or if possible left/right gestures to the new actions introduced in win 10.
researched a bit online and I think that maybe they can be changed through registry edits.
Secondly, I also want to change three finger press to Notification centre. I have a option to launch any program with this gesture so I want to know that if an executable shortcut can be created to windows notification centre (shortcut: Win+A).
I got a problem with USB cable. When I plug it in there is no action from system side. It should at least give me a message like"Unknown Device" but there is NO such message. I don't see it also in device manager...
I've checked same cable on different laptop (Windows 7) and it shows as "Unknown Device".
Scan for hardware changes also dont work for it...
- how to debug it? I've tried Microsoft and Intel drivers but with no luck
I am using Windows 10 - Intel 6 Series / C200 Series Chipset Family USB Enhanced Host Controller - 1C2D & 1C26 USB Drivers
I'm not sure if this is the right place or if it should possible be network related... but for some reason, the "Bluetooth" tile is back in my Action Center, but I have zero Bluetooth devices on or installed.
It was there after the latest build 10586, then I think the first Cumulative Update came out and it went away... I doubt there was any causal link between them... but now after a restart of the computer, the tile is back... and I don't know why.
Don't know if this is the right area but when I try to add my Canon MP 600 printer I can't. Have tried to follow the instructions when I click on add printer but it's all Chinese to me.
View 2 RepliesHP 1512 all in one printer only has a usb connection (not wireless) It was connected and worked in Win 7 but would not work in Win 10. Win 10 does not recognize the connection during installation.
I followed the directions in the printer support, disconnected and reconnected, uninstalled and reinstalled, got HP to connect to my computer, and worked on it for 2 days. Now I have no Printer Support files (HP Techs deleted too much?)
I want to delete a printer selection from the print window for example text document File>Print I've deleted it in the window but it comes back.
View 3 RepliesAfter upgrading to Windows 10, the scanning on my HP printer doesn't work. The other printer functions work o.k.Should I simply delete the printer and reinstall it?
View 1 Repliesbuild 10049; i'm able to print but when i scan i get this error message ; i change location but i get the same error;
View 9 RepliesI have recently upgraded to Windows 10 Home (64bit) from Windows 7 Home (64bit). I am having problems that I cannot find a fix to in the common faults section. As in the title, my start button is not working. The action center, settings and task manager are not working also. Other problems I am having are: I cannot open a new user account, I cannot log into my guest account or one of my main accounts and I cannot log into cmd as administrator by right clicking on it in the task bar. I have tried to fix the start menu my opening powershell as administrator and pasting some code into it, but it did not work.
View 2 RepliesAfter I installed windows 10 my printer won't print. It shoots out the paper but it is blank. I checked and all the drivers are up too date. I use a Canon MX860 All in one. It worked fine on Vista, 7 & 8.
View 1 Replies