Drivers/Hardware :: Realtek Card Reader Keeps Disappearing?
Dec 6, 2015
I've just updated my Dell Inspiron 7537 laptop to Windows 10.
All is working fine apart from the built in Realtek card reader. When the PC starts, the card reader appears as a drive and I can read/write to the card. However, the reader will randomly show no content in file explorer and the drive disappears altogether if I remove and reinsert the card. The card reader reappears if I restart the PC. Device Manger shows no problems with the card reader.
I've tried the Dell Windows 10 driver, the latest driver on Realtek's site and the driver installed by Windows update but all fail in the same way. The card reader was fine in Windows 8 so I think it's a software issue.
View 9 Replies
Similar Messages:
Dec 9, 2015
When I was viewing my windows 10 updates I saw some unusual update history of my Realtek USB 2.0 Card Reader, (see attachments)I very rarely use this on my Dell Inspiron ONE but thought I would just check it out, and it did of course not work, I tried to find the driver in Device Manager but could not find it? How to know about installing the driver again if it is missing, I tried an external usb card reader and this is seen in File Explorer unlike built in one with sd card inserted.
View 2 Replies
Apr 4, 2016
I have an HP DV4 Laptop(i5, 8GB RAM, 256GB SSD) that came with Windows 7, I recently updated to Win10. Everything seems fine except of the high CPU usage in System and Compressed memory. I narrowed it down to the Realtek Memory Card reader. I should also mention that right after the Win10 update two Realtek Memory Card Reader entries were in Device Manager with yellow exclamation icons.
I deleted them and had Windows install the drivers from Windows updates, after that everything LOOKS fine. And there's only one entry now.After a while I noticed the fan making a lot of noise, wasn't like that in Win7.Anyway, after hours of troubleshooting I eventually came back to the Realtek reader, sure enough after disabling it CPU went to normal.I have also downloaded the newest driver from realtek site.
View 2 Replies
Jul 30, 2015
when I use my internal card reader when I eject the card (does not matter which type) I am seeing its ok to remove the card but then should I want to put another card in too read my reader does not work until I reboot its a usb reader was working in w7pro with no problem
View 6 Replies
Oct 29, 2015
When I connect my USB card reader which is a Q7S card reader. Which is this one here [URL].....
When I connect it ti my computer it stops working and in device manager it says Device Descriptor Request Failed and gets a code 43.
View 9 Replies
Nov 30, 2015
Ever since I upgraded to Windows 10, I'm now seeing the 4 card reader drives built into my computer appearing on some of the different desktop folders.
They don't appear on C:UsersusernameDesktop, nor do they show up on the physical desktop screen itself, which also doesn't show the Recycle Bin, Control Panel, etc (ie, it works the same way I had set it up before on 8.1) but they do appear on my taskbar desktop, on the navigation pane, and so forth.
View 4 Replies
Aug 24, 2015
I have installed Windows10 on a Gateway FX530 desktop PC. All has gone well with one exception. The OS seems to recognize that there is a card reader attached, I can see them through Device manager. When I insert a SD card the system completely ignores the device and will not allow me to access it. I have tried to change the drivers, without success. This card reader worked just fine with Windows 7 Pro and there was no indication that they would not work with Windows 10 when I ran the upgrade test.
View 2 Replies
Oct 20, 2015
I have tried inserting my card into slot, I get message, connect a device and try again.it wont read the card.
View 1 Replies
Oct 24, 2014
We're having a discussion over at DP Review. It's a photography site, but they also have a PC Talk forum. Anyway there's a discussion thread - USB thumb drives vs Card Readers in which we're trying to figure out if Windows will boot from a card reader with a SD card installed?
Basically you install the boot media on the SD card, use a card reader to read and boot from it.
I've never tried or seen this so I may be completely wrong, but I contend that neither Windows nor the BIOS will recognize the card reader as a valid boot drive.
View 9 Replies
Dec 7, 2015
How can I download photos from my memory stick. I insert the reader in the usb socket I hear the normal sound but nothing shows on the screen. This only happened since I upgraded to windows 10
View 4 Replies
Sep 2, 2015
I can not figure out how to remove Photos as my default SD card reader. It is totally useless, does not read my SD card and I think it is what has locked me out of my Photos folder.
View 4 Replies
Nov 30, 2015
Ever since I upgraded to Windows 10, I'm now seeing the 4 card reader drives built into my computer appearing on some of the different desktop folders.
They don't appear on C:UsersusernameDesktop, nor do they show up on the physical desktop screen itself, which also doesn't show the Recycle Bin, Control Panel, etc (ie, it works the same way I had set it up before on 8.1) but they do appear on my taskbar desktop, on the navigation pane, and so forth.
How do I hide these without disabling the drives?
View 2 Replies
Aug 3, 2015
I recently upgraded my laptop to Windows 10 from Windows 8.1. After that, my Realtek PCIe GBE Family Controller (ethernet) randomly stops working. After a reboot or "fixing" the problem, the card works for anywhere from 1 minute to 4 hours, then fails again.
Sometimes "failing" means that in control panel it shows that it is still connected, but doesn't actually work, [URL]
or other times it just shows that it is unplugged, when that is certainly not the case [URL]
Troubleshooting the problem with Windows troubleshooter yields three errors, seemingly random when they each appear.
The three errors are "The Default Gateway is not Available", this error [URL], and then finally a DNS error that shows up on Chrome and the Windows troubleshooter [URL]. The way the internet stops working is Chrome will stop loading web pages and give me a DNS error, shown in the most recent gyazo.
So far I have tried rebooting numerous times, (which USUALLY fixes it for a few minutes), troubleshooting with Windows troubleshooter, and changing the DNS servers to Google's (which I have now changed back to the automatic setting since my ISP, Time Warner Cable, isn't too happy about working on an external DNS server. I have also tried eight different ethernet cables, over two different networks and routers. All of this has begun after I upgraded to Windows 10.
I have tried three different drivers for the ethernet card; one from Realtek's website, one from my laptop manufacturer's website (Sager), and lastly Window's generic one, none of which have worked for me. It could be a coincidence, but it seems that if I have constant load on my ethernet card, it lasts for much longer without failing.
View 1 Replies
Aug 28, 2015
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 Replies
Jul 29, 2015
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
View 9 Replies
Jul 17, 2015
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
View 9 Replies
Aug 7, 2015
I upgraded Windows 8.1 Pro 64bit to Windows 10 Pro 64bit on Wednesday July 29 and everything went ok until today I noticed that files on my 2nd hard drive keep disappearing. I always have my OS on one hard drive and keep all my data files on another hard drive.
Before I upgraded to Win10, I used Seagate DiscWizard to clone my Win8.1 to an identical hard drive and then upgraded the Win8.1 clone to Win10 and kept my original Win8.1 hard drive as a backup just in case something didn't work.Just so there isn't any confusion, I have 3 hard drives:
1. Original Win8.1 Seagate 300GB
2. Win10 Seagate 300GB
3. Data Seagate1TB
I noticed today that one of my soundcards isn't working correctly and the Win10 beta driver is a little buggy, so I decided to remove my Win10 drive and put my original drive with Win8.1 back in. While using Win8.1 I saved some files to my Data drive.
I then decided to go back to Win10, so I removed my original Win8.1 drive and put my Win10 drive in. When I went to my Data drive I noticed my files I saved while using Win8.1 were gone. I then swapped my Win10 and Win8.1 and the files were still gone. I saved some files again while using Win8.1 and they again disappeared when using Win10, so then I saved some files to my Data drive while using Win10 and they were still there when using Win8.1, so files I save to my Data drive stay when saved with Win10 but disappear when saved with Win8.1 and then boot to Win10.Then I tried another test and while in Win8.1 deleted the files on my data drive created with Win10 but they reappeared when I booted to Win10.
View 4 Replies
Jan 9, 2016
When I hook up an internal hard drive in win 10 my DVD drive disappears . Cant find it in explorer . The second hard drive takes the D letter and no DVD rom is shown . When i disconnect the HD the DVD returns as D drive . SATA connections on everything .
View 1 Replies
Dec 31, 2015
so i just wanted to install the lasted version of the driver and when i try to install the driver it will keep on restarting over and over again after it says its done and needs to restart and when the computer turns back on it does the exact install over and over again and it never finishes but my realtek driver still works.
View 1 Replies
Nov 15, 2015
I'm having an incredibly frustrating problem with my Windows 10 laptop. The laptop in question is a Clevo P650SE with the i7-4720HQ and GTX 970M. I reinstalled Windows last week and now i can't get rid of this damn Realtek driver. Whenever i uninstall the Realtek software from Control Panel, it comes straight back after a reboot.
A lot of websites suggest heading into the 'Device Installation Settings' and hitting 'No (Your device might not work as expected)' but this has no effect towards the issue. On previous builds of Windows 10 this worked fine, so i'm not sure what to do next.
View 9 Replies
Jul 8, 2015
I have a Lenovo X1 Carbon (2012 version) with a fingerprint reader. When I want to install the lenovo driver I have a message that said the Windows Biometric Framework need to be activate. I go into gpedit.msc and active the service, reboot the computer but still the error...
I check in the bios, no error..
View 9 Replies
Dec 20, 2015
Recently I purchased a Logitech h151 headset which has only one single jack, as my ASUS laptop has only one jack used for a headset. However, upon connecting the headset, although the sound plays through it perfectly and without issue, the microphone doesn't seem to work.
I've tried multiple solutions - I went to the Realtek Audio Manager to try and find advanced options, as I read that a possible fix to this is to go there and select an option to separate all input jacks. However, I cannot seem to find advanced options anywhere. I have also entered the Sound section in the control panel, and under the microphone section my external microphone was not detected, even after showing all disabled devices.
As for the Realtek Audio Manager issue, I read of several solutions to make advanced options pop up - from updating the driver to completely uninstalling it and such. As you can probably understand, I would rather not result to such things as messing with the drivers, as I am not a tech-savvy person and will not be able to claw out of a technical hole should I get into one.
EDIT: I forgot to mention, the internal mic is being used and can be detected (of course).
View 5 Replies
Nov 12, 2015
The adapter works in windows 8.1 but does not start in windows 10. Device manager shows an exclamation mark. Installing a new driver does not work. The device manager tells me the best drivers are already installed.
View 9 Replies
Aug 5, 2015
Basically when I try to record my voice all I hear is very strongly distorted sound, no speech is recognizable. I tried updating drivers, all mic settings I can think of but with no success.
When I open the Realtek manager and click the icon for playback on my mic settings the audio is crystal clear, and if possible I would like to have this instead of what is actually outputted. I dont know how to set that working
I clicked to "Listen to this device" and all I hear is VERY distorted sound, no speech is recognizable.
So from what I understand the mic is perfectly fine, the drivers should be fine but the quality that is outputted is terrible. Is there anyway to output what I hear from the playback on realtek?
Im attaching quick screenshot with some more explanation: [URL] ....
View 3 Replies
Sep 27, 2015
Messed around with the drivers, now the ethernet device doesn't show up in the network adapter settings, although it shows up in the Device Manager. It is also apparently in sleep mode.So after formatting and installing Windows 10 x64 on my Dell Inspiron 3542, I decided to update/re-install the drivers from the official Dell download page. Windows Update had taken care of the hardware but the versions were outdated, so I set to work. After successfully installing almost all the drivers, I ran the Ethernet Controller Driver and after installing it, the ethernet device was disabled. BTW, the device shows up as "Realtek PCIe FE Family Controller".
I enabled it but it still remained disabled. In the Properties dialog box it gave me the option to disable it, which means that it thinks that the device is enabled, which it is not. It is visible in the Device Manager, so it is being recognized. After restarting to come to the same result, I deleted the driver from Device Manager and re-installed it, which didn't work. (I don't remember if I attempted a roll-back, although if I did then it obviously didn't work either.)
Then I went to the Realtek official website and downloaded the Win10 Auto-installation Program. It asked me to remove the previous installation from Dell, and near the end, it gave me the error, "The Realtek Network Controller was not found. If Deep Sleep Mode is enabled, Please Plug the Cable". And after this, or after deleting and re-installing the Dell driver (I unfortunately don't remember when), the ethernet device disappeared from the adapter settings. Now there's only Wi-fi there.I really want my ethernet back, even though I have wi-fi to connect to the internet. The only solutions I can see are to either get the Dell driver working or to remove the device from sleep mode.
View 9 Replies
Feb 10, 2016
In my right speaker, I have a slight distortion when i hear high-pitched sounds. I checked on my headphones and I dont hear it. I updated my Realtek audio drivers a few times. It improved the first time. I still have a subtle issue and I'm not sure what to do.
I switched the inputs on my speakers and I still seem to be getting it on the right speaker. it might be the speaker, but since it improved with the driver update.
View 6 Replies
