Drivers/Hardware :: Recover Data From RAW Disk?
Nov 27, 2015
I had Windows 10 Enterprise on a ssd 480gb sandisk ultra II but It's corrupted, I can't even launch Windows or repair tools.
I've managed to run repair tools and get a command prompt, as diskpart says, my disk is on a raw partition now, and it shows the following:
Total space on disk: 448gb
Space available on disk: 448gb
I've read something that on raw filesystem Windows can't see the drive then I'm wondering, if diskparts says that the space available is the same tan total disk, does it mean that I've lost all my data? Is really important for me to recover the data.
I've installed Windows 10 on another drive, but the drive isn't recognized, not in diskpart, not in Windows explorer, and tried about 5-6 programs for recover data on raw disk/partition and none of them saw my disk.
The main question is if I lost all my data, because if not, I will give it to the shop for repair it.
View 3 Replies
Similar Messages:
Nov 28, 2015
I installed Windows 10 on a new PC, with OS on Samsung 950 PRO. For data disk, at this stage, I use a Samsung 840 PRO which I transferred from my old 8.1 PC.
The data disk now shows in diskmanagment 351MB unallocated space, and 119 GB NTFS Healthy (Primary Partition).
How can I reclaim the 351MB unallocated to get maximum capacity of the data disk?
Maybe this a standard case of repartitioning, but I am not familiar with that and do not know how to do it.
View 6 Replies
Aug 28, 2015
I originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it,
my drives and partitions look like this:
I'm not sure if to remove the old SYSTEM partition or not, and if the SSD needs one also, My boot is also a lot slower on windows 10
View 8 Replies
Feb 10, 2016
My laptop running Windows 10 updated to the latest build and would not boot. I kept getting Missing boot manager missing. Eventually I removed the drive and replaced it with my backup clone but that backup is missing a week of a lot of work so I was hooked the original laptop drive to my pc.
Short story, I confused the laptop drive with another disc I a, working on and went into admin tools, storage, and deleted the three partitions on the laptop drive. Since I have tried to recover the partitions with Acronis Disc Manager but the volumes it identifies do not fit. There are three partitions. The primary, the HP recovery and the HP Tools. Total disc is 465GB. The primary partition is 452.
The results I get have seven or eight partitions sizing various sizes between 190 - 350 GB. They all seem to intersect.
i them tried the free EaseUS app which lists multiple versions of every file ever deleted. Is there any easy way to do this?
View 4 Replies
Dec 18, 2015
while trying to troubleshoot a lousy 1.5TB WD drive I had accidentally deleted and recreated the partition on a different USB drive without noticing.What are my options? I don't have a spare drive to restore to. The drive was only using 350GB of 900gb, but it has been filled and erased several times without defragmenting. I have it unplugged now.
It's not entirely a disaster; aside from my (dubiously obtained) movie collection there's nothing really that I need and can't redownload or have on my SSD.
View 3 Replies
Oct 6, 2015
I was running win 7 with 4 partitions , thought to upgrade to win 10. While installing it didn't allowed me to install. I thought i can run diskpart clean on one partition, selected one volume and ran clean command, but it still cleaned all the partitions. Long story short, I cannot boot my OS until I install OS on freshly created single partition. I was told to use partition recovery apps like partition and mount software, Do I have to install OS on it anyways and once OS is installed, instal the partition and mount software for the recovery?
View 8 Replies
Mar 14, 2016
I've upgraded from win 8.1 to 10. after upgrade all my files were in local disk user and in the folders but were not in library folders e.g pics were in local disk user pictures but not in file explorer pictures. so i moved every thing to the folders and after restarting my laptop everything was gone... what can i do to recover my data.
View 1 Replies
Aug 20, 2015
I've been considering shrinking my one disk (disk 0) to create another volume, a data partition, but I'm still not clear what happens in the event that I want to refresh, reset or clean install Windows 10 in the future. Would the data partition remain or, as I thought I read, Windows will format the entire disk?
View 1 Replies
Nov 17, 2015
Running windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
View 5 Replies
Dec 4, 2015
One of my WD Green 2tb drives has become raw and can't be used. Windows will not complete a format of it. Shows up in my computer. Is there any way of saving this drive?
View 6 Replies
Sep 4, 2015
I got this PC yesterday and have noticed that there is a random empty drive in This PC. It says "762 GB free of 763 GB."
Does this come with every OS and what is it used for?
View 1 Replies
Feb 10, 2016
I've just installed a 3TB Toshiba hdwd130 and it's only showing as 1TB?
I've used 2TB disks before, but this is the first 3TB disk I've tried to use.
The disk controller on the MB is an RS880P.
I've checked and the drivers all appear to be the latest.
View 9 Replies
Feb 10, 2016
I have a program that I wanted to install into my Win 10 Pro Machine (64 Bit) and have found that the disk can not be read by the DVD/CD-ROM Drive. I also tried it in another Windows 10 Computer (64 Bit) and it also can't read the disk.The disk worked fine under Windows 7, in both the same computers. The drive works as it reads other CD/DVD's.
The disk is good as it works perfect in an other Windows 7 (32 Bit) and Vista computers (32 Bit). Computer is up to date with builds etc.
View 2 Replies
Nov 24, 2015
Problem:
I have a 2TB seagate barracuda HDD that is not showing up in:
- disk management
- CMD -> diskpart -> list disk
It does show up in:
- device manager
- bios
- Intel rapid storage technology
Screenshots:
Specs:
CPU: I5 6500
Motherboard: GA-Z170XP-SLI
Windows 10
I also tried switching out cables and ports. Same results.
View 5 Replies
Feb 10, 2016
My old Windows XP Desktop stopped running 2 weeks ago, with a No OS Found error. Since then I've taken the hard drive out and connected it to my new Windows 10 desktop with a USB 2.0 to SATA Adapter. It does not show up in "My Computer", but is detected in Computer Management.
The drive's an old Western Digital WD2000 one, and started clicking (for a few seconds) as soon as I attached it to the PC w/the USB Adapter. The clicking stopped after that.
It shows up as "Disk 1, Unknown, with the amount of data on it (186.31 GB [out of 200]), and is Unallocated. I've already tried numerous utility and Data Recovery programs, such as Recuva, MiniTool Partition Wizard, EaseUS Data/Partition Recovery. No luck with these.
They were either not detected, or didn't find anything. MiniTool Partition Wizard said it's a "Bad Disk" I
Partition Find and Mount is still conducting a scan which has been going for the past 7 hours (35%).
BTW - I really can't leave the hard drive on for the night to conduct a long scan. It's been overheating, and I already have a large fan next to it to cool it down. It's not safe to leave this on for an extended period of time.
Only to find out I bought a USB 3.0 Adapter instead of a 2.0 my old XP supported when It still ran.
View 3 Replies
Feb 10, 2016
I am getting the above message when in plug an external HDD via USB. Checking this out forum I Have tried Chkdsk commands at cmd prompt:
chkdsk f: /r
chkfdsk /f f:
for both I get the same reply: "Type of file is NTFS. Unable to determine volume and version state"
This external HDD is my backup and I would like to get it back. If possible with data, if this is not possible just back so that I can re use it.
View 2 Replies
Oct 11, 2015
So it was working fine and then it got slow when putting things on it and then blah it wont let me open it. if i managed to get the attachment thingy right you the drive f: which is giving me the problems i tried to circle it in paint.
View 9 Replies
Sep 26, 2015
I just spent a long time trying to find the best answer for this and wanted to save people some time... this is specifically for Windows 10.(So, the answer is basically here: URL...Add a new "Multi String Value" called "TreatAsInternalPort" to HKEY_LOCAL_ MACHINE SYSTEM Current Control SetService sstorahciParametersDevice with the values "0|1|2|3|4|5|" (the | symbolizes a new line)(I had to reboot two (2) times before the changes took.)
I had to do this fix because BitLocker has different options specifically for fixed, local, internal drives as opposed to a USB drive or eSATA drive which is removable. Also, this gets rid of the "Eject" option in Windows 10 for mislabeled internal HDDs.This is what it looks like when storing the values into "TreatAsInternalPort":
View 1 Replies
Jan 31, 2016
It won't let us access the local disk and says we don't have permission. I am the only user. It won't let us save anything on that disk either. I have gotten all of the documents, videos, and pictures backed up so that's not an issue. We are really just trying to reset the computer with a fresh start but it wont let us.
Resetting the computer- This wouldn't let me because it said it had an error. I did this by holding shift while restarting and then troubleshooting from there. I've tried the option of saving files and also whiping the whole computer, both ways won't work.Booting in safe mode- it works but nothing has come out of doing anything in that mode.
View 1 Replies
Aug 17, 2015
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
View 3 Replies
Sep 7, 2015
I did something terrible to my tablet, I converted the partition from GPT to MBR in a desperate try to install windows 7.Now tablet is not reading any usb I plug in, and of course I cannot format disk again because it doesn't recognize anything, always booting at uefi shell.
View 7 Replies
Aug 6, 2015
On every restart, I see this warning message:
Disk 1 has the same disk identifiers as one or more disks connected to the system. Go to Microsoft's support website [URL] .... and search for KB2983588 to resolve the issue.
This did not happen on Windows 8.1 and there were no changes to any of the disks except for the Windows 10 update.
I do have a lot of drives (8) and volumes (14). But I looked at each of the GUIDs and UniqueIds and did not see any duplicates.
The reference to KB2983588 was f no avail as it does not seem to apply to Windows 10, or at least using DISM to enable that feature does not work:
Dism /online /enable-feature:MultipathIo
View 2 Replies
Aug 29, 2015
Windows keeps putting my Canon printer in device manager under the disk drive. Also puts the printer under printers which is correct. Everytime I uninstall it from under the disk drive location.
It puts it back after a reboot. Also get dump files error on usb port, which the printer uses. Printer works fine, but it should not be put under the disk drive in device manager. only way to stop it, is to turn printer off, before I reboot.
View 9 Replies
Mar 5, 2016
I have a two laptops with Windows 10 x64. Recently I noticed new partition with next available letter. Size is 128mb and it can't be accessed. I checked in Disk Management but this partition is not listed there as per the below screen:
I used MiniTool Partition Wizard and managed to see details about this partition.
I tried Diskpart to remove Drive Letter but no luck:
This happened at the same time on my two HP laptops but not sure what could cause it. Maybe some Windows update? I do not remember installing any new apps. I would like to remove this disk from the list of available disks.
View 9 Replies
Dec 25, 2015
Somehow unintentionally I created a dynamic disk partition on what was my boot drive but is now intended to be my documents and pictures folder drive.
How do I get rid of the first dynamic partition and change it to a normal partition to store my 'Documents" & "Pictures" folders for the new Win 10 Pro drive C:
Windows (Drive C ) is running fine.
trying to set the default location for Pictures and Documents to the original (C) now drive (D)...want only 2 partitions when fixed - "Documents" and "Pictures"
View 1 Replies
Oct 1, 2015
After installing Win-10 with a Flash Drive, The Flash Drive no longer visible either in My PC Folder or in Disk Management Thought this was a Isolated incident, Apparently not as 2 other flash dives i have have also disappeared, Really strange as 1 of the flash drives is less then 2 weeks old, Tried to find them using CMD & Diskpart but noting visible there either .
Flash Drive 1 16GB - Kingston DataTraveler 2.0
Flash Drive 2 16GB - SanDisk Cruiser Blade 2.0
Flash Drive 3 8GB - Was a Gift Dont Know Make 2.0
My Motherboard is USB v3.0 (Incase u need this info)
View 1 Replies
