Drivers/Hardware :: Request For USB Device Descriptor Failed
Sep 21, 2015
I have a USB port on my motherboard that never worked. I had the problem with Windows 7 complaining about it, but something I did got Windows 7 to be quiet.
Now I have Windows 10.
Action Center is popping a steady stream - and I do mean steady - of "USB device not recognized."
Device Manager refreshes so often it is hard to right click on things because of the refreshing.
The item is listed as "Unknown USB Device (Device Descriptor Request Failed)." It alternates between these 2 error messages.
Device status: Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.
Device status: Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
A request for the USB device descriptor failed.
Here is my USB list:
Universal Serial Bus controllers
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A34
[Code] .....
Things I have tried:
-I am using regular boot. I am not using quick boot.
-I have disabled the driver.
-I have uninstalled the driver.
-I have uninstalled all of the host controllers above and allowed them to reinstall.
-I have manually reinstalled all of the host controllers' drivers above (by using the default driver).
-I have turned off the PC and unplugged it.
Annoyance reduction:
In Sound, I have set Device Connect and Device Disconnect to no sound.
I have tried turning off Action Center notifications for all apps, but don't like doing that because that also prevents other notifications that I do want. Also, when I do that the old gray symbol for a device connection problem starts showing up in the notification area.
I have tried turning off Action Center notifications for all apps and then turning it right back on. The problem goes away for a few minutes.
View 1 Replies
Similar Messages:
Oct 22, 2015
I have a USB device (X.Vision PCDVB-3100) It work properly in Windows 8 and Windows 8.1 But now in Windows 10 when I connect it to USB port, The Windows give me this error:
Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.
How I can solve this problem?
View 4 Replies
Jul 29, 2015
Fresh install of Windows 10 and the last driver I need to sort out is the above.
I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.
View 5 Replies
Aug 19, 2015
My laptop does not want to recognise the sound card/audio driver that are built into it. The fun part is this just happened. Audio played yesterday, and the time before that, and even before the upgrade. The only thing that has changed (or at least is the biggest change i can think of) is downloading and installing Cygwin (sans audio packages). In trying to play a song on the new microsoft Groove, i get this;
Further inspection in the playback devices, the only two options are the Speakers/Headphones and communications Headphones, the former of which i can only assume is my actual computer speakers (otherwise its completely gone!).Looking at the device manager, everything seems okay. All the drivers are up to date so im not sure what could be wrong there?
Its Windows 10 pro (upgraded from Win7 Pro) and the computer is a Dell Precision M4600. (I am pretty sure the audio driver is in the device manager image).
View 1 Replies
Nov 26, 2015
I'm been having issues a long time with different sorts of BSOD's but I've been able to cook it down to this last one after replacing both graphics card and Logitech headset.
Latest error which occuring at least once per day:
The driver DriverWudfRd failed to load for the device SWDWPDBUSENUM{01539fd4-4f12-11e4-824c-806e6f6e6963}#00000000007E0000.
View 8 Replies
Sep 12, 2015
i have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
View 4 Replies
Jan 17, 2016
I recently put my camera memory card into my computer to download photos. I couldn't open them and need to leave so hit "remove device" figuring that I'd go back later when I had more time to get them. When I went back and reinserted the card it didn't show up. I've tried to "add a device" but it still doesn't work. When I hit the device and printers icon it doesn't show up. What do I do?
View 4 Replies
May 4, 2015
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 Replies
Aug 29, 2015
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 Replies
Dec 28, 2015
It used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
View 3 Replies
Nov 12, 2015
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!
View 5 Replies
Sep 30, 2015
I have just done a Clean Install of Windows 10 on my Sony Vaio VGN-NW21ZF laptop following a partition corruption while trying to repartition the HDD. previously it had been upgraded to Windows 10 from Windows 7 and there were no device driver issues.
All appears to be working OK, but in device manager I have two unknown devices that do not have drivers installed. On is described as Base System Device, and the other as Unknown Device. Looking at Sysyinfo I see the following details:
How do I work out what these devices are so I can try to find the correct drivers?
Looking in Computer Management I see this information
View 1 Replies
Dec 2, 2015
Over the past few weeks I've been trying various Alfa Wi-Fi adaptors, and different drivers. I've now given up and bought a device (TP-Link) that has a driver built into Windows 10.
However, when I plugged it in it seems to have picked up on an Alfa driver, possibly as the chipset is similar.
Is there a way to purge all drivers for a device type, except the Microsoft ones?
View 4 Replies
Nov 12, 2015
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
View 2 Replies
Jan 23, 2016
I have three computers in family that were given upgrades on the win7 family plan. One was just informed it was eligible for win10 upgrade. I think I made the mistake of custom install (for a clean install) instead of an upgrade and, related to other problems with windows update, I might have lost my activation on win7. Long story short, when I got to the point where win10 was installed and asking for a key I knew I had done a no no as, if I had done it correctly, I should not have been asked for a key. Of course I have no key but the win7 key and the install just sits there with no options but to input the key, which I don't have.
View 4 Replies
Dec 3, 2015
I got an error message. saying "Either there is no default mail client or the current mail cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client". I check the outlook option and it is set to outlook as a default program. I also went to default program in the control panel and that is also set to outlook. When I open a saved mail on m computer with an extension .msg it will get that error message.
View 2 Replies
Aug 4, 2015
I am running a Win 7 Pro laptop. Today when I tried to run Win 10 upgrade, it gave me the error, Multiple IRQ Compete Request, then it revert back to Win 7.
I tried going through Device Manager but so far there's no error.
The other odd problem I have is that when I click on the Get Win 10 icon (sitting in my notification bar) and then click on Ok, Let's Continue, I will get the error, 'Window Update has stopped working'. Then the whole thing crashes.
View 1 Replies
Nov 26, 2015
When I install modem MMX310G 3G USB MANAGER in windows 10, it shows driver installation failed and when open this app it shows no devices.
View 2 Replies
Oct 24, 2015
Bought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.
View 9 Replies
Aug 4, 2015
if i try to install the latest windows 10 driver it says it fails, then if i try to uninstall my current ones it says it fails as well. what am i supposed to do, my other display wont get recognized and my main display is not running at 1080p.
View 1 Replies
Feb 23, 2016
When I open my email account from my browser I am taken straight into my emails without having to put in my account name or password. I always sign out. I never check the "keep me signed in" box. But this invariably happens. Surely there should be some security measure to prevent this as it seems to leave the system open to hackers.
View 1 Replies
Aug 5, 2015
I have a Dell Latitude E6520 running Windows 10 Pro x64. When I try to watch YouTube I get no audio. Spotify plays and gives no errors but doesn't have sound. When I plug in headphone sound plays but as communications headphones.
When I try to play a test sound through Speakers/Headphones I get an error that says "Failed to play test tone." When I try to troubleshoot it can't identify the problem. I have attached the report from troubleshooting.
View 3 Replies
Aug 4, 2015
The normal uninstall of old drivers in Device Manager isn't working. I am trying to update my Intel 7260AC Wi-Fi adapter to the latest Windows 10 drivers (18.12 from Intel's website). They won't install. The .exe runs but the drivers don't change and the new drivers aren't even listed in device manager to select. I can only select between two older driver versions that were once used under Win 8.1 (I upgraded).
When I try to uninstall the device, the check box to uninstall software isn't available. The device will uninstall but simply comes back with one of those two drivers. Is there another way to permanently remove them (e.g. where does Windows store driver software including registry entries). I would like to simply get rid of anything and try to get 18.12 drivers to install...I'm thinking they are somehow conflicting and preventing the install.
View 1 Replies
Feb 10, 2016
I had 3x 3TB drives in a parity pool. It started to fill up so i added a fourth 3TB drive and months later one of the original 3 began to fail on me. Performance was slow, then slower, then it showed disconnected.
I retired the drive and added a replacement, literally the same model 3TB drive. I cannot however, get it to remove the failed physical disk and repair the pool. I even tried adding another 2TB drive i had available in case it needed the extra space (didn't make sense but i was reaching).
I get the "drive could not be removed because not all data could be reallocated. add an additional drive to this pool and reattempt this operation."
I have searched a lot and don't really seem to be getting anywhere. The only way i was able to retire the drive was through powershell. I'm assuming it's a GUI issue and perhaps i'm not approaching it correctly via powershell. Attempting to repair virtual disk didn't work.
I really don't want to lose this data. I wasn't able to backup much before the drive failed completely.
View 3 Replies
Oct 6, 2015
Most often I face this problem with my USB drive like Pendrive, Portable Harddisk, SDMMC Card etc which are not in use anywhere and does not show in Task Manager but still you cannot eject it out or get the message "safe to remove". If this situation arise how to overcome and eject the USB out safely without corrupting your contents in the USB Drives.
View 5 Replies
Sep 30, 2015
I have googled this all over the place and there are all sorts of issues with DVD / CD-ROM players no longer being recognized but I haven't come across the same problem I'm having.
I upgraded to Windows 10 64bit from Windows 7 64bit. One day while I was transferring data from my SSD boot drive to my HDD storage drive everything locked up, I got an error message (that I didn't save) and all of a sudden my HDD was no longer visible in My Computer. I ran into all sorts of issues following this and believed that something had corrupted during the data transfer so I opted to disconnect my HDD and do a fresh install of windows with a format on my SSD.
Everything was working well until one day the same thing happened with my DVD/CR-ROM drive, it just disappeared from My Computer. I went to install / check for updated drivers in Device Manager and I believe I clicked uninstall by mistake.
Now when I look at Device Manager there is not even a DVD/CD-ROM option (menu spot for it).
Above: So here you can see My Computer, there is my SSD Boot drive but the DVD / CD-ROM is not there
Above: The DVD / CD-ROM drive does not show up in Disk Management, I've tried rescanning drives, refresh, nothing. (As an aside, what are those unnamed disks???)
Above: Device Manger, there is not even an option to view DVD / CD-ROM drives.
Above: Regedit - A fix I saw was to check this registry for UpperFilters and LowerFilters both of which were not there so I didn't touch anything here.
So far I have done the following troubleshooting:
Turned off the PC and unplugged the CD/DVD drive from the Sata Port. Restarted the PC and loaded windows. Shut off the PC again and re-connected the CD/DVD drive.
When I started the PC back up I entered BIOS and the drive shows up under Sata Port 2 like it should:
ASUS DVD RAM GH75N
There is power to the drive, it opens and closes and if I put a disk in it spins up.
So this leads me to believe the drive is ok and the cable / port are good as it's being recognized.
I think my biggest concern is not being able to see a menu in Device Manager for DVD/CD-ROM drives. I'm not sure how it got removed or how to get it back.
I'm going to try and contact ASUS to see if they have specific drivers for this drive meant for Windows 10.
View 8 Replies
