Drivers/Hardware :: SSD Drive Is NOT Accessible After Update
Nov 17, 2015
After nice Windows update I cant access my second SSD drive with the following message "Can't access drive, The device is not ready." If i rollback the whole system SSD to previous Windows version with Acronis backup utility the drive works like charm. If i try to format it with Acronis Disk Director I get the following message Disk Write Error, Run check disk.
Check disk give following message:
C:Windowssystem32>chkdsk g:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
I have been using this SSD for almost 2 years now and I couldn't be happier until a couple of days ago, when my computer did not read it when I connected. (I use a Qosmio X70, win 10)
Here's what's happening. When I connect it shows up on the task bar as it's manufacturer's name rather than the name i assigned to it, does not show up in My computer, shows up at "USB mass storage device" in device manager, but does not show up in disk manager and finally it shows up (in it's manufacturer's name again) in "printers and hardware".
If I try to eject it from the task bar, nothing happens, when I remove the cable a message pop's up saying the device was in use by a program.
Furthermore when I try to uninstall it from "device manager" the app freezes and is not responsive.
Is there a way to fix it, I'd rather not lose the files in the SSD, but if it's a must it would be fine; I;d settle for just formatting it and getting it back as it was.
PS I tried to access the SSD on my windows 7, doesn't show up in any way there. Also changed the cable, nothing happened.
Early on in the Windows 10 update process, I was able to upgrade an HP Stream 7 and a Stream 11 to Windows 10. Both had the same 32GB RAM and nominal 32GB eMMC as the Stream 14 I am wrestling with. Both came to a point where they told me the device had insufficient space on its C: drive. In both instances I selected an external Micro SD drive, and off it went with the upgrade.
In this instance I cannot get past that point. I select the external drive (a 320GB external USB spinner) but it doesn't accept that or any other external device I offer it.
When I click "Refresh" it says that it needs 10GB on C: drive, and eventually says that the upgrade failed.
The computer has been wiped, and reset to factory spec for W8.1 with all updates installed. It has ~20GB on C, and 7GB in another partition, so even if I find a way to remove the partition it wont be enough.
I'm about to have to give up on this thing and just make the poor user run with W8.1 until further notice, how to get past this point.
I discovered today that the new pictures folder that was created when the Windows 10 upgrade was done is not accessible to me and I am the only User and I am the administrator of the PC. When I open the security tab of folder properties it shows that I have all permissions but I still can't access the folder...
I can't even access regedit, c drive, One drive, or install any new devices. Even launching the windows troubleshooter fails to load application. Everything was working fine pre windows 10 I cant save any folders to my documents, pictures, downloads will download but cant launch or install. I can't even create new folders on the desk top.
I have previously used win7. Had an administrator and a guest account. Two dri es were not accessible from the guest account. I set that. Now i installed a fresh copy of win 10 pro, and now i cant access those drives from the only account i created in win 10. How can i solve it?
I have 2 desktops and 1 laptop at home. All 3 are joined in a homegroup, and all network and sharing settings are selected properly. All 3 computers have same windows accounts (passwords), same programs and same internet security.
The 3 computers show up in the network folder and can be accessed from any other computer.However access to the laptop is often denied, by error message 0x80070035 "network path not found"
From the laptop, each desktop is always accessible, no matter who is signed in.
From the desktops, the laptop is often not accessible (error message)
I have an ASUS 2 speed router - it worked fine in Win 7, allowing me to target the 5.2 MHz stream toward my TV for streaming, and use the 2.5 MHz speed for the computers, tablets & phones.
Well, I lost my motherboard, and purchased a CPU with Windows 10. I cannot tell what the router is doing - Windows 10 seems to think I do not require this information, and will not allow me to even SEE the router settings, let alone change them. The stream to the TV seems fine - the CPU internet is slow.
I'm having issues accessing both the Wifi Panel and the Windows Start Menu from task bar at the bottom of the home screen. When I left-click on with it does nothing. I can right-click on the icons but still unable to open either. Wifi shows a connection (Wifi icon) but still unable to connect to internet. Other items in the task bar are accessible with no problems. Unable to download/update anything because of the inability to access the internet.
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk. During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
Reading this [URL] there is a troubleshooter which I have downloaded and run. According to that there are drivers for my HP 710C and D1460 printers waiting at windows update but it is not downloading and installing them.
I have enabled automatic driver installation and wu is set to automatic, yet no drivers.
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I noticed after a clean install of Win 10 Pro that in the Device Manager I had two "Standard SATA AHCI Controller" entries that showed the driver dated in 2006. I run 2 x SSD's a HDD and a BluRay writer.
So I downloaded the latest version of SATA drivers at the Asus ROG site for my motherboard. After running, one entry in Device Manager has changed to "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller" but the other remains "Standard SATA AHCI Controller" - still with the 2006 driver version 10.0.10240.16384 dated 2006/06/21
ALSO: The driver installed "Intel Rapid Storage Technology" program. Do I need this? If I do need it, must it be enabled at start up? I am wondering if it might conflict with Samsung's Magician which I also have installed?
I have window 10 preview. but i just moved to another house and i have no internet. i would like to update it. how can download an update to an usb drive, I've been looking on google but cant find nothing..
I have updated the computer to windows 10 Build 1511, Through windows update !! This is the latest November major update not a new instillation.
This is very strange i can use the computer and access all my files however i have no access to anything i need to repair my computer the C Drive is showing however shows no content . I try to access it and it says access not allowed. In sharing the C Drive is shared....
OK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
So I just finished installing windows 10 and I'm having this issue where my display driver isn't being recognized and instead its now showing "Microsoft Basic Display Adapter". Is there any way to bring back the old driver to its original resolution?
I have a Dell Inspiron N7110 and it seems like all the drivers are only compatible with Windows 8.1, how can I bypass that?
Also, another issue is that Windows Troubleshooter doesn't work. When I click on "Show more" it says that "Context: Restricted".
