Drivers/Hardware :: SSD USB 3.0 Is Not Accessible
Oct 7, 2015
I have been using this SSD for almost 2 years now and I couldn't be happier until a couple of days ago, when my computer did not read it when I connected. (I use a Qosmio X70, win 10)
Here's what's happening. When I connect it shows up on the task bar as it's manufacturer's name rather than the name i assigned to it, does not show up in My computer, shows up at "USB mass storage device" in device manager, but does not show up in disk manager and finally it shows up (in it's manufacturer's name again) in "printers and hardware".
If I try to eject it from the task bar, nothing happens, when I remove the cable a message pop's up saying the device was in use by a program.
Furthermore when I try to uninstall it from "device manager" the app freezes and is not responsive.
Is there a way to fix it, I'd rather not lose the files in the SSD, but if it's a must it would be fine; I;d settle for just formatting it and getting it back as it was.
PS I tried to access the SSD on my windows 7, doesn't show up in any way there. Also changed the cable, nothing happened.
View 5 Replies
Similar Messages:
Nov 17, 2015
After nice Windows update I cant access my second SSD drive with the following message "Can't access drive, The device is not ready." If i rollback the whole system SSD to previous Windows version with Acronis backup utility the drive works like charm. If i try to format it with Acronis Disk Director I get the following message Disk Write Error, Run check disk.
Check disk give following message:
C:Windowssystem32>chkdsk g:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
View 2 Replies
Sep 13, 2015
I discovered today that the new pictures folder that was created when the Windows 10 upgrade was done is not accessible to me and I am the only User and I am the administrator of the PC. When I open the security tab of folder properties it shows that I have all permissions but I still can't access the folder...
View 8 Replies
Aug 7, 2015
I can't even access regedit, c drive, One drive, or install any new devices. Even launching the windows troubleshooter fails to load application. Everything was working fine pre windows 10 I cant save any folders to my documents, pictures, downloads will download but cant launch or install. I can't even create new folders on the desk top.
View 1 Replies
Dec 22, 2015
I have previously used win7. Had an administrator and a guest account. Two dri es were not accessible from the guest account. I set that. Now i installed a fresh copy of win 10 pro, and now i cant access those drives from the only account i created in win 10. How can i solve it?
View 1 Replies
Feb 10, 2016
I have 2 desktops and 1 laptop at home. All 3 are joined in a homegroup, and all network and sharing settings are selected properly. All 3 computers have same windows accounts (passwords), same programs and same internet security.
The 3 computers show up in the network folder and can be accessed from any other computer.However access to the laptop is often denied, by error message 0x80070035 "network path not found"
From the laptop, each desktop is always accessible, no matter who is signed in.
From the desktops, the laptop is often not accessible (error message)
View 2 Replies
Nov 5, 2015
I have an ASUS 2 speed router - it worked fine in Win 7, allowing me to target the 5.2 MHz stream toward my TV for streaming, and use the 2.5 MHz speed for the computers, tablets & phones.
Well, I lost my motherboard, and purchased a CPU with Windows 10. I cannot tell what the router is doing - Windows 10 seems to think I do not require this information, and will not allow me to even SEE the router settings, let alone change them. The stream to the TV seems fine - the CPU internet is slow.
Anyway - how I can access the router settings!
View 3 Replies
Dec 17, 2015
I'm having issues accessing both the Wifi Panel and the Windows Start Menu from task bar at the bottom of the home screen. When I left-click on with it does nothing. I can right-click on the icons but still unable to open either. Wifi shows a connection (Wifi icon) but still unable to connect to internet. Other items in the task bar are accessible with no problems. Unable to download/update anything because of the inability to access the internet.
View 1 Replies
Aug 28, 2015
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 Replies
Jul 29, 2015
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
View 9 Replies
Aug 29, 2015
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 Replies
Jan 28, 2016
I have been installing and reinstalling windows 10 through bootcamp 6 on El Captain on my Macbook Pro.
But i keep getting the same result - the speakers and right click option are missing.
Where i can download drivers for Windows 10 on bootcamp 6 or what other way to resolve this issue.
View 5 Replies
Jul 17, 2015
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
View 9 Replies
Mar 5, 2016
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 Replies
Feb 23, 2016
I have a driver that loads late in the boot process. On every boot, the Win 10 boot process is interrupted about half way through by the "Found new Hardware" notification sound. It then continues to boot normally with no errors.Is there a log file that states the drivers that are loaded, and the time they loaded? If not, is there a 3rd party software that can give me that information like the old Dr Watson?
I figure the hardware driver making the "new hardware" sound is probably the last one to load, and I can find which one it is by observing the time it loads.I have unplugged every USB and other peripheral device with no luck. I have no flags in Device Manager, even the hidden devices have no errors.
View 3 Replies
Sep 21, 2015
Unfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
View 4 Replies
Aug 9, 2015
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 Replies
Dec 28, 2015
It used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
View 3 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Nov 12, 2015
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!
View 5 Replies
Sep 26, 2015
I'm having quite a bit of trouble removing the generic bluetooth drivers that Windows installs for you. Those have to be gone if I want to install Toshiba Bluetooth Stacks, which I need in order to use my Wii U Pro Controller in my computer. I've gone through a few methods to try this out and all have failed.
I started out by simply uninstalling the drivers on the device manager (or whatever it is called in English). Didn't work, as the drivers were back when I had to plug in my dongle to complete the installation for TBS. When I tried this in Windows 7, it worked flawlessly, yet in Windows 10 this method did not work.
Afterwards, I tried deactivating the forced driver signature, as well as make it so Windows Update doesn't automatically download any drivers it finds suitable. On top of this, I traveled into the INF folder of my Windows folder to do steps that Microsoft recommended: rename bth.inf to bth.inf.old and bth.pnf to bth.pnf.old. With all this, it should in theory work right? Nope, it didn't. Not even after a reset.
My last attempt involved unplugging my PC from the Internet as a first step, followed by everything else listed above and then a reset. The drivers were still back, bth.inf and bth.pnf somehow magically appearing in my Windows folder when I have no Internet access. I'm at a loss as to what I'm supposed to do.
View 4 Replies
Oct 21, 2015
Windows 10 should find new drivers through the update mechanism, which doesnt work always though. And if you go into device manager and click on a device and do a look for new drivers, it always finds new ones with a high chance. But it' just stupid to click all 100 devices single through. Isnt there a smart way to do this? Why isnt there an option for search and download all devices drivers.
View 7 Replies
Sep 30, 2015
I have just done a Clean Install of Windows 10 on my Sony Vaio VGN-NW21ZF laptop following a partition corruption while trying to repartition the HDD. previously it had been upgraded to Windows 10 from Windows 7 and there were no device driver issues.
All appears to be working OK, but in device manager I have two unknown devices that do not have drivers installed. On is described as Base System Device, and the other as Unknown Device. Looking at Sysyinfo I see the following details:
How do I work out what these devices are so I can try to find the correct drivers?
Looking in Computer Management I see this information
View 1 Replies
Dec 17, 2015
So, first up, was getting crashes with my windows 10 after installing nvidia driver 359.00, mostly crashes that recovered automatically, then started getting Blue Screens. Tried 359.06 and had the same problems. Rolled back to 358.91 which originally had been stable but after the rollback became crashy, but less than the other 2 drivers.
Had a HARD crash while playing Dragon Quest Heroes, rebooted from that and could not boot into windows whatsoever. Had to pull the card, use the motherboard video, removed the nvidia drivers entirely. I can boot into windows as long as there are no nvidia drivers while using my GTX 670. While attempting to reinstall any nvidia drivers with maybe 5% of the green bar on the installer showing it goes black screen, sits for a bit, then reboots. BIOS looks fine, windows splash comes up, not the password screen, black screen there. Tried what I could find to put the password in and get past he black screen but nothing happening.
Is there a problem with my card or my windows install? I'd rather not buy a new card but its always a pain reinstalling windows if I don't actually have to. how to export all my windows settings if I do need to reinstall.?
View 1 Replies
Dec 2, 2015
Over the past few weeks I've been trying various Alfa Wi-Fi adaptors, and different drivers. I've now given up and bought a device (TP-Link) that has a driver built into Windows 10.
However, when I plugged it in it seems to have picked up on an Alfa driver, possibly as the chipset is similar.
Is there a way to purge all drivers for a device type, except the Microsoft ones?
View 4 Replies
Aug 25, 2015
I installed windows 10 for my Asus laptop(which was running windows 8.1 pro and the mic worked perfectly) , and the microphone just doesn't work. I tried to install the latest win 10 drivers for Via, and that didn't work. Are there any fixes for this problem, or am I just out of luck?
View 1 Replies
