Drivers/Hardware :: SSD Not Showing Up?
Dec 31, 2015Just purchased a used Samsung Chronos 7 laptop and updated the OS from 8 to 10. Now the SSD disk doesn't show up anywhere.
The C drive is 1TB and the SSD would be 8GB.
Just purchased a used Samsung Chronos 7 laptop and updated the OS from 8 to 10. Now the SSD disk doesn't show up anywhere.
The C drive is 1TB and the SSD would be 8GB.
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 RepliesI recently upgraded from Windows 8 to 10. Post upgrade I have just realized my DVD Drive is not observable/findable in the File manager. It is also not observable in the device manager.
It is however, powered up and is recognized in the BIOS Menu as Sata 4 and recognized by the computer as Boot Device one.
The computer will boot from the DvD Drive if I put a bootable DVD (my old windows 8.1 disc in this case) in the drive, I just tested this.
Why is my laptop showing System 32-bit, when its clearly x64-bit machine.
View 3 RepliesI've just installed a 3TB Toshiba hdwd130 and it's only showing as 1TB?
I've used 2TB disks before, but this is the first 3TB disk I've tried to use.
The disk controller on the MB is an RS880P.
I've checked and the drivers all appear to be the latest.
Yesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
I have a Seagate 1 terabyte external hdd and windows 10 cant see it.. even when I go to C: drive
and display all drives its not showing. its installed drivers but still cant find it....
Problem:
I have a 2TB seagate barracuda HDD that is not showing up in:
- disk management
- CMD -> diskpart -> list disk
It does show up in:
- device manager
- bios
- Intel rapid storage technology
Screenshots:
Specs:
CPU: I5 6500
Motherboard: GA-Z170XP-SLI
Windows 10
I also tried switching out cables and ports. Same results.
I have upgraded my OS to Windows 10 from 7 and I can not see the PORTS(COM and LTE) in the device manager. I tried everything but don't know how to find it.
View 5 RepliesWhen I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
I have a DELL-XPS13 Laptop. After upgrading it from win8 to win10, i noticed a restore partition is getting showed up in explorer as Z drive.
When I open Disk Management, i do not see this Z drive assignment to the drive.
I do not know how I can hide this drive.
I've done a reinstall of Windows 10 today. I unplugged my internal storage HDD's to isolate the SSD for the install, wiped the SSD, and reinstalled 10.
Now it's installed, I've plugged my 2 internal HDD's back in, started up Windows, and neither drives are showing. Neither in device manager or in Explorer. What could be the issue here, and how do I resolve it?
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
View 2 RepliesWhen I use the "Safely Remove Hardware and Eject Media" icon/tool, to remove a USB stick, my internal SSD drive shows as a choice to be removed. How can I get the SSD off this list?
In Device Manager, under Disk Drives, looking at the SSD drive's properties there is no "Removal Policy (i.e. choice of "Quick Removal" or "Better Performance") like the removable hard drive on my laptop has.
I have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
I installed Win10 Pro x64 from scratch on my desktop computer and that is the only OS I have on that computer. The Device Manager shows an alert - please check the attachment. I have Nvidia Geforce 9400 and have updated the drivers. How can I get rid of that alert ?
View 9 RepliesMy setup before the problem was:
- Windows 8.1 in a 250GB SSD with Linux dual boot
- Secondary 160GB HDD (fs: ntfs, type: primary)
- Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
[URL]
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 RepliesI have a two laptops with Windows 10 x64. Recently I noticed new partition with next available letter. Size is 128mb and it can't be accessed. I checked in Disk Management but this partition is not listed there as per the below screen:
I used MiniTool Partition Wizard and managed to see details about this partition.
I tried Diskpart to remove Drive Letter but no luck:
This happened at the same time on my two HP laptops but not sure what could cause it. Maybe some Windows update? I do not remember installing any new apps. I would like to remove this disk from the list of available disks.
I just installed Windows 10 fresh and noticed that two of my Harddisks are not showing at the left menu in the Explorer.I have 3 Harddisks and only Harddisk D: ist showing. When i connect a USB-HDD it shows up instantly.
View 9 RepliesI have this issue where the files and folders on an external device (such as an external HDD and USB) are not showing up, yet the device is visible. I only started getting this issue after I connected my USB to another computer which makes me think a virus caused this. Here's where I am at:
The drive in question is the "STEAM GAMES (F:)" drive. It shows up in explorer as shown:
And when opened, this is what's inside the F drive:
By showing hidden files and not hiding protected operating system files, this is what shows:
What I've tried:
The command "attrib -h -s -r -a /s /d F:*.*" returns this: Full system scan using Anti-MalwareBytes and Avast! reveals nothing.Running RKill, UsbFix, RogueKiller, and iExplore.exe does not fix the problem.
I just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
Ever since I upgraded to Windows 10, I'm now seeing the 4 card reader drives built into my computer appearing on some of the different desktop folders.
They don't appear on C:UsersusernameDesktop, nor do they show up on the physical desktop screen itself, which also doesn't show the Recycle Bin, Control Panel, etc (ie, it works the same way I had set it up before on 8.1) but they do appear on my taskbar desktop, on the navigation pane, and so forth.
Messed around with the drivers, now the ethernet device doesn't show up in the network adapter settings, although it shows up in the Device Manager. It is also apparently in sleep mode.So after formatting and installing Windows 10 x64 on my Dell Inspiron 3542, I decided to update/re-install the drivers from the official Dell download page. Windows Update had taken care of the hardware but the versions were outdated, so I set to work. After successfully installing almost all the drivers, I ran the Ethernet Controller Driver and after installing it, the ethernet device was disabled. BTW, the device shows up as "Realtek PCIe FE Family Controller".
I enabled it but it still remained disabled. In the Properties dialog box it gave me the option to disable it, which means that it thinks that the device is enabled, which it is not. It is visible in the Device Manager, so it is being recognized. After restarting to come to the same result, I deleted the driver from Device Manager and re-installed it, which didn't work. (I don't remember if I attempted a roll-back, although if I did then it obviously didn't work either.)
Then I went to the Realtek official website and downloaded the Win10 Auto-installation Program. It asked me to remove the previous installation from Dell, and near the end, it gave me the error, "The Realtek Network Controller was not found. If Deep Sleep Mode is enabled, Please Plug the Cable". And after this, or after deleting and re-installing the Dell driver (I unfortunately don't remember when), the ethernet device disappeared from the adapter settings. Now there's only Wi-fi there.I really want my ethernet back, even though I have wi-fi to connect to the internet. The only solutions I can see are to either get the Dell driver working or to remove the device from sleep mode.
There is no drive assigned. I wonder what it refers to? I've checked the registry but can't figure it out. How would I remove it?
View 1 RepliesI've had this problem with my razer kraken headset with sound being played back through the mic. My friend has an identical pare that he had the same problem with. To fix it he simply went into Realtek HD Audo Manager and when to device advance settings and checked "Seperate all input jacks as independent input devices" and bam! NO more sound from his end.
I went to check to see if I could do the same and all I found under device advanced settings was playback devices. No recording devices.