Drivers/Hardware :: Secondary 3TB HDD Not Showing In Explorer After Upgrade
Jan 31, 2016
My setup before the problem was:
- Windows 8.1 in a 250GB SSD with Linux dual boot
- Secondary 160GB HDD (fs: ntfs, type: primary)
- Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
[URL]
View 8 Replies
Similar Messages:
Jan 21, 2016
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
View 3 Replies
Dec 31, 2015
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 Replies
Nov 21, 2015
I just installed Windows 10 fresh and noticed that two of my Harddisks are not showing at the left menu in the Explorer.I have 3 Harddisks and only Harddisk D: ist showing. When i connect a USB-HDD it shows up instantly.
View 9 Replies
Dec 1, 2015
I just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
View 9 Replies
Jul 30, 2015
I upgraded from Win 7 Pro to Win 10 Pro yesterday and so far everything works great, the only problem is that my secondary HDD always stays on. I have a 128GB SSD as my main drive and an 750GB HDD as my secondary drive for games, pictures and stuff. Since the latter runs at 7200rpm and is quite loud and my laptop is otherwise pretty much completely silent (when I turn the fan on stealth mode) I had created a power profile for studying that turns off hard drives after 1 minute of not using them and with windows 7 that worked just fine.
Now though, my secondary HDD never turns off. I checked task manager and resource monitor and found that my pagefile was on my secondary so I moved that to my SSD, but now it still doesn't turn off, even when Task manager and resource manager tell me nothing has accessed it for several minutes.
View 7 Replies
Feb 3, 2016
I just upgraded to an SSD and installed a fresh copy of windows onto it. I would like to delete windows off of my old hard drive and delete the old drivers off of it as well. I have a bunch of games on it that I'd rather not have to re-download so is there any way of doing this without formatting the drive?
View 1 Replies
Jul 30, 2015
I just installed Windows 10 and have got a problem that has me stumped. I have two GPUs, an EVGA GTX 760 as my primary and a GTX 560 Ti running a second monitor. The 760 had no issues in the upgrade, but no matter what I do to the 560, it shows up in device manager as Code 43. I'm trying to gauge if it's an issue with the fact I have two dissimilar GPUs or a bit of software not liking that particular card. My gut says software, but I don't know exactly what. I've done some googling to the effect and seems to be I'm not the only one with troubles but didn't find a fix that worked.I don't want to roll back just yet and my 760 can pick up the slack easily, so if there's a fix on the horizon I can wait. Otherwise, I'll have to check my options.
View 1 Replies
Sep 24, 2015
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 Replies
Oct 4, 2015
Since late Sep 2015 updates, I have been getting random freezes when writing files to secondary HDD via Internet Download Manager and also freezes when deleting big file in that HDD.Things done to fix but failed:
1. update Internet Download Manager to latest version
2. replaced secondary HDD
3. reformat and install Win 10 on SSD
View 4 Replies
Oct 21, 2015
I use Windows 10, but ever since upgrade from XP to windows 7, PSD thumbnails are not showing in windows explorer, as jpg and gif does.
Tried this solution but nothing changed:
How to enable Thumbnail view for Photoshop PSD files in Windows 7?
View 6 Replies
Aug 18, 2015
I noticed that when opening Desktop in Windows Explorer, it doesn't show any of the icons of This PC, My Documents, Network and Recycle Bin. I have enabled these icons to be shown on the Desktop through the "Desktop Icons Settings" option. However, Explorer ignores them and only shows icons that are manually put on the Desktop.
View 9 Replies
Jan 13, 2016
My external drive(Samsung) connected via usb3 has started showing twice in file explorer. Opening either shows exactly the same files inside. Screen shot below, I've never tried this so I hope I've done it OK...
View 3 Replies
Sep 26, 2015
I have recently upgraded from Windows 8.1 Pro to Windows 10 Pro and everything was fine then. But recently I am experiencing an issue which is "Pinned items and Jump List are not displayed in File Explorer in both Taskbar and Start Menu". Pinned items and Jump Lists are displayed for other programs in Taskbar as usual but the issue is only with File Explorer. I have restarted the PC but still the problem persists and I have also disabled Cortana.
System Specs:
CPU - Intel Core 2 Duo
Motherboard - Gigabyte (G31M-ES2L)
RAM - 4 GB
Graphics Card - NVIDIA GTX 560 (2 GB)
OS - Windows 10 Pro (64 bit)
View 5 Replies
Sep 29, 2015
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
View 5 Replies
Jan 1, 2016
In Windows 10 File Explorer keeps showing multiple Documents Folders then they disappear and come back again all without my doing anything.
View -1 Replies
Feb 1, 2016
My new laptop has Windows10 pre-installed. It crashed and file explorer won't now show recent files. It seems to be showing recent folders but there are no recent files. Settings/personalisation/start shows "recently opened files" is turned "on" and File Explorer is showing on the Task Bar....
View 1 Replies
Dec 12, 2015
This has suddenly happened, explorer is missing the 'space' information from the display.
The build up to this was simply creating a Windows disk image using W10's own utility. Mysteriously the space bar on the problem partition showed some usage, about 1.7Gb but nothing could be found in the partition. I've even tried deleting the partition in Disk Management and reassigning a drive letter but nothing gets the display back.
View 9 Replies
Aug 15, 2015
My new windows 10 only sees my PC - when searching for my files in Explorer, it cannot 'see' my two external drives when I plug them in. I've looked in Device Manager and they are not showing in there either. How can I tell Win 10 to access my external drives?
I thought Win 10 would automatically spot my external drivers the moment I plugged them in? Then it would go search for and install the appropriate drivers - but it isn't doing that..
View 2 Replies
Aug 6, 2015
This old error suddenly seems to have come back again
Some duplicate folders showing up again. (Note I CLEAN re-installed W10 after an upgrade - legally activated).
View 6 Replies
Aug 21, 2015
My Windows 10 File Explorer is muddled showing many items, and in particular USB Flash Drives twice!
View 4 Replies
Jan 17, 2016
I'm on a Windows 10 Pro PC accessing a linux server with samba etc installed and working well (visible via Homegroup to both Android and Windows 7 pro). From the Win 10 box, if I type the name of the server in Windows File Explorer, then the shares from the server show up without issue. However, if I go into the Network folder, it does not see the linux servers - even though they are correctly configured for the correct homegroup. My windows 7 machines can see the servers in "network" as can my android devices.
Here's a screenshot. Note, the red arrows show what displays in Network folder (red arrows). If I click on the Server Name (HunterNAS in this case), the server shares are displayed and it shows up in the Network folder (blue arrows). Even after making the successful connection, display of another file explorer window > Network folder displays no linux server shares...
View 9 Replies
Dec 18, 2015
Latest (preview) build - file explorer not showing progress when copying / moving files.
This - unless fixed soon will cause me to revert to previous build. Is it just something with my update. (W10 Pro X-64).
View 1 Replies
Aug 17, 2015
I don't know if this is related to Win10, or an issue that existed with my Win8.1 before. I just noticed it after upgrading yesterday.
So, my firewall just prompted me about an outbound connection attempt by a file (named C:WindowsSystem32SIHClient.exe) and I didn't recognize it. I found it using explorer, and it's unsigned; so I visited VirusTotal.com and tried to upload it... but from the file upload browse box in Chrome I can't see the file! Even typing *.* and open doesn't remove the "filter" and reveal the file. (I finally ended up copying it to desktop and uploading from there, but still don't know what the file does.)
I thought that Explorer's "File View Options" (show hidden files, do not hide operating system files, etc.) were used throughout Windows once applied. Am I wrong? Should I suspect a virus or is this normal? What gives?
View 5 Replies
Aug 24, 2015
I have upgraded my Windows 7 Pro to a VM in Mac Pro using Parellels, it worked fine and due to some reason I need to shut down the VM and created a new one with Windows 7 Pro. Now I have updated all the installers and there is no update left. But still I cannot see the Windows 10 Upgrade App in the task bar.
As I am unable to set the upgrade option, what is the alternate to install Windows 10 to my VM?
View 2 Replies
Nov 28, 2015
After installing visual basics dlls.. After some minutes my windows Explorer started showing error.. This file does not have a program association with it for performing this action. Please install a program or l, if one is already installed, create an association in the default program control panel.. . This error pop ups whenever i tries to open Explorer directly from Taskbar. ..
View 1 Replies
