Drivers/Hardware :: Some Drives Showing As Removable
Nov 21, 2015
Yesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
View 2 Replies
Similar Messages:
Jan 21, 2016
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
View 3 Replies
Jan 10, 2016
I just completed an update installation on a desktop PC running Windows 7. Now my hard drives show up as removable drives.
Normally this is due to the need to install an AHCI driver. And that is normally the Intel Rapid Storage Technology Driver for Intel chipsets. The driver was installed in Windows 7.
Is this a case where I need to manually install a new IRST Driver for Windows 10? If so, should I uninstall the existing first, or will the new one overwrite the old?
View 1 Replies
Feb 10, 2016
When I use the "Safely Remove Hardware and Eject Media" icon/tool, to remove a USB stick, my internal SSD drive shows as a choice to be removed. How can I get the SSD off this list?
In Device Manager, under Disk Drives, looking at the SSD drive's properties there is no "Removal Policy (i.e. choice of "Quick Removal" or "Better Performance") like the removable hard drive on my laptop has.
View 9 Replies
Feb 10, 2016
There is no drive assigned. I wonder what it refers to? I've checked the registry but can't figure it out. How would I remove it?
View 1 Replies
Aug 9, 2015
Ok, I thought this was just bitlocker stuff but its all removable drives.
When I connect a removable drive I don't get a notification banner. I get a sound and the notification goes straight to Action Center instead of showing the banner. I've gone in and disabled and renabled all the notifications, Ive made sure both "Banner" and "Sounds" are enabled for everything, but still nothing.
When I get an email in Outlook I get the banner like I'm supposed to, others programs like Logitech Gaming Software are also showing banners, so it seems like a device connection thing at the moment.
View 1 Replies
Aug 24, 2015
How to ungroup and separate removable drives in This PC?
it shows removable drives, optical drives and hard drives in one group together. This is one of the the worst changes made to Windows. Sadly, the OS does not offer you any option to the ungroup drives logically so local drives are in one group and the rest in another.
View 1 Replies
Feb 10, 2016
I've done a reinstall of Windows 10 today. I unplugged my internal storage HDD's to isolate the SSD for the install, wiped the SSD, and reinstalled 10.
Now it's installed, I've plugged my 2 internal HDD's back in, started up Windows, and neither drives are showing. Neither in device manager or in Explorer. What could be the issue here, and how do I resolve it?
View 5 Replies
Nov 30, 2015
Ever since I upgraded to Windows 10, I'm now seeing the 4 card reader drives built into my computer appearing on some of the different desktop folders.
They don't appear on C:UsersusernameDesktop, nor do they show up on the physical desktop screen itself, which also doesn't show the Recycle Bin, Control Panel, etc (ie, it works the same way I had set it up before on 8.1) but they do appear on my taskbar desktop, on the navigation pane, and so forth.
View 4 Replies
Feb 23, 2016
I'm running Win10 64bit. My sig has all my system details.
I use 2 SSD's and 1 internal HDD.
Issue 1: My internal 2TB HDD is displayed in Device Manager as Portable Devices. This HDD hosts my User's Folders.
Issue 2: I have an external HDD which is a USB3.0 compatible. When it's connected to a USB3.0 port, the LED on the HDD is blue, and if it's USB2.0 the LED is white.
When I wake up the PC from Sleep mode, the HDD doesn't return to USB3.0 status, instead it's LED is white. Unplugging and re-plugging, won't work. I'll have to reboot the PC to get it back to USB3.0
GIL-PC-Fri_12_02_2016_213655_86.zip
View 9 Replies
Jan 24, 2016
I have an Epsom A810 printer, connected to desktop PC by USB.
The printer has a USB port for loading pictures to the printer from a thumb drive. Thing is, this port makes the printer show up in Disk Management and My PC as a removable drive.
But it is not a drive at all. I can't access the files on the thumb drive through the printer, so it functions as a phantom drive.
Any method to stop Windows from recognizing the printer as a removable drive?
View 9 Replies
Aug 20, 2015
There is an icon in my tray to "Safely remove hardware and eject media". It is always there (even when no USB devices are plugged in) because Windows thinks my second internal SSD is removable.Is there a config setting or a registry edit to fix that?
View 6 Replies
Nov 7, 2015
under disk management its showing two C drives one with
Healthy (OEM Partition)
Healthy (Boot, Page File, Crash Dump, OEM Partition)
recently upgraded from windows 8.1 to windows 10.
upon right click it only showing help.
View 2 Replies
Jul 29, 2015
My Maxtor external hard drive is not showing under This PC, but is under Device Manager. Updating the driver comes back as driver is up to date. Changing Bios setting between UEFI and Legacy do not make a difference. Using a different USB port does not make a difference.
I can get full access to the drive if I boot up LinuxMint from a USB stick.
Microsoft says this is a manufacturers driver problem.
Acer says this is Windows problem.
View 1 Replies
Sep 29, 2015
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
View 5 Replies
Nov 30, 2015
Ever since I upgraded to Windows 10, I'm now seeing the 4 card reader drives built into my computer appearing on some of the different desktop folders.
They don't appear on C:UsersusernameDesktop, nor do they show up on the physical desktop screen itself, which also doesn't show the Recycle Bin, Control Panel, etc (ie, it works the same way I had set it up before on 8.1) but they do appear on my taskbar desktop, on the navigation pane, and so forth.
How do I hide these without disabling the drives?
View 2 Replies
Aug 15, 2015
My new windows 10 only sees my PC - when searching for my files in Explorer, it cannot 'see' my two external drives when I plug them in. I've looked in Device Manager and they are not showing in there either. How can I tell Win 10 to access my external drives?
I thought Win 10 would automatically spot my external drivers the moment I plugged them in? Then it would go search for and install the appropriate drivers - but it isn't doing that..
View 2 Replies
Aug 21, 2015
My Windows 10 File Explorer is muddled showing many items, and in particular USB Flash Drives twice!
View 4 Replies
Sep 24, 2015
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 Replies
Jan 26, 2016
I have a Windows 7 PC with 3 DVD drives. Imgburn shows them as connected to 3 different SATA busses: [2:0:0], [3:0:0], and [4:0:0].
After upgrading to Windows 10, all of them ended up on the same bus, [2:0:0], like this:
Why did that change? I tried connecting them on different SATA plugs, but they are always shown on that [2:0:0] bus. The thing is, I really need them to be on different busses, because of a particular requirement of a legacy application I use.
View 4 Replies
Aug 22, 2015
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
View 1 Replies
Nov 16, 2015
Why my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
View 3 Replies
Feb 23, 2016
I've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
View 1 Replies
Nov 28, 2015
So I have set up my SSD and using it for my OS (Win10) and my F drive (1TB HDD) as a drive for my programs and documents, however when I try to search for items vis Windows Start Menu it only shows items for my C drive, how to make it to search both drives for documents/files?
View 6 Replies
Jan 29, 2016
Lately, every flash drive I've bought requires to be NTFS formatted. Quick formatting gives me the option to change allocation size. Is there a specific size I should be using or just go small?
View 4 Replies
Sep 23, 2015
I have several hard drives on my PCs; some are physical, some are partitions. In every PC I've upgraded, W10 marks these as RO. I go through the ritual of setting permissions to Full and marking RW, but occasionally a drive will revert to RO. I can't find a Take Ownership option for drives, only folders. Am I looking in the wrong place?
View 6 Replies
