Drivers/Hardware :: Sound Does Not Transfer To The External Sound Devices Automatically
Dec 23, 2015
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
II am having trouble moving data to external sources via USB. It always happens partwaY through a transfer. It gives me messages like the transfer could not be completed, that the device is no longer found, or the files aren't available. Most times when I restart it the transfer gets a bit further than it did the time before, but never by much and when moving large amounts of files it makes transferring my media and data impossible.
Sometimes, after the computer is unsuccessful with the transfer the device is no longer recognized by the computer at all. It will call it an unknown device with ? next to it in the device manager. I try to install the drivers automatically but it just tells me I am using the newest drivers but will not register what the device is or allow me to view or transfer files on the device. Usually there is no problem transferring data from a usb connected drive to a different place on the same drive. It happens on both of my systems: An acer aspire one running windows 7, and a compaq presario running windows 10. It happens with all the usb ports (3 on each system). It happens even when I use several other cables to try to connect the device.
I seem to be able to copy files from the drives to the computer, but when writing to the drives it gets stuck. It happens with 2 external hard drives, 2 phones, 4 usb drives, a tablet, and sd cards. What is going on here? I don't think I could have that many bad cables and usb ports. If there is something wrong with write protection, wouldn't it just not transfer anything at all? I have checked for viruses. I can still play songs and look at pictures from the drives so I know the files aren't completely corrupted.
I just installed the most recent windows 10 tech preview last night; but my sound blaster pci express sound card did not get installed correctly or something because i am getting no sound at all. I roll everything back to the old setup.
I can't get surround sound to work on my Windows 10! I have a HDMI Cable going from my gpu (R9 270x) to a projector, and from that an optical audio cable is being sent to my BluRay player with the speakers connected to it... I get sound from the front left and right speakers but thats it, when I go into the playback devices and configure it 5.1 surround sound is not an option.
I know our Surface Pro 3 has a lower volume threshold when you listen via headphones or speakers. Put the volume at 100% and for some of us, the volume is not loud enough.
I plugged my Surface Pro 3 into my docking station which is then connected to my ASUS VG248QE (external monitor). The volume, in my opinion is not loud enough at 100%. I am not looking to wake up my neighbors but I am looking to listen to a movie/TV show loud enough where the AC noise does not get in the way or any external outside noise.
I have this issue where the files and folders on an external device (such as an external HDD and USB) are not showing up, yet the device is visible. I only started getting this issue after I connected my USB to another computer which makes me think a virus caused this. Here's where I am at:
The drive in question is the "STEAM GAMES (F:)" drive. It shows up in explorer as shown:
And when opened, this is what's inside the F drive:
By showing hidden files and not hiding protected operating system files, this is what shows:
What I've tried: The command "attrib -h -s -r -a /s /d F:*.*" returns this: Full system scan using Anti-MalwareBytes and Avast! reveals nothing.Running RKill, UsbFix, RogueKiller, and iExplore.exe does not fix the problem.
I would like to eliminate the sound when I adjust the volume on the sound icon in the lower right hand area of the task bar . Wat steps I can take to be able to still adjust the volume, but not hear the loud sound it makes when adjusting?
I was previously on Windows 7 and upgraded to 10 when the notifications came out last month. In W7 I was able to open the SOUND RECORDER program
and then record sounds from the video that was playing through the internet explorer I was using at that time. It did NOT matter which internet explorer I was using, be it IE or CHROME or FIREFOX, etc. I was previously able to open a video, for example youtube, and then record the sound that was playing into the SOUND RECORDER program, and then save that file on my desktop as a WMA.
I have not been able to find the SOUND RECORDER program in Windows 10. Is it gone? I've tried downloading a couple freebie programs that are similar to it, but they're not recording the sounds either. So now I'm thinking maybe Windows 10 bypassed or simply disregarded my sound card altogether, ? Is that a possibility?
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
Sound comes through perfectly fine on my laptop's built-in speakers. However, when plugging my headphones into the 3.5mm headset jack, there is no sound whatsoever. The system recognizes that my headset is plugged in. In fact, the microphone on my headset functions perfectly when plugged in, but the headphones themselves are outputting no sound.
I tested the headphones on other computers and devices, and they work. In Device Manager, the device is listed as "Realtek High Definition Audio". However, the only sound device listed in Control Panel is "DTS Audio Control Panel".
I've tried uninstalling the audio device from Device Manager, and then reinstalling the driver from Realtek's website. However, this is met with the exact same results... no sound through the headphones, and "DTS Audio Manager" is installed in the Control Panel instead of Realtek HD Audio Manager.
If I navigate to Control Panel -> Sound -> Playback, "Headphones" is not listed as a device. Instead, Speakers/Headphones is listen as the sole device. Also, I ran DirectX Diagnostic Tool, and it returned absolutely no errors.
There used to be a sound option in my taskbar like everyone remembers, but I had recently installed X-Split and that is the last time I remember seeing it there. I have been on the forums and Google looking for answers but everything I find tells me to go to the settings and hit enable all. This was already checked off but even trying to select individual tasks it's not there.
Need to restore the option, volume is stuck at 37% and can't change it so I've had to use my neighbor's DJ equipment just to watch netflix at something I can hear.I went one setting down to Turn system icons on/off and sound is greyed out can't adjust that.
I was looking at a video on youtube, didn't do anything, all of a sudden the sound goes out. I make sure nothing on youtube is muted and it wasn't. So I right click my "SPEAKERS" icon (I'm wearing headphones) I click SOUND, then I click the SOUND tab, and the "test" icon is greyed out, meaning I can't click it. I haven't had sound in 3 days and nothings muted.
I installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
I have a fresh install on my PC and for some reason it doesn't detect my headphones, I've plugged them in the front and rear and still no luck, all drivers and software are up to date, They did use to work before the fresh install.
Since the latest Win 10 update I can no longer get sound to come out of headphones.
Before when I plugged in headphones the speakers were turned off automatically. Now nothing happens when phones plugged in except the speakers continue to give audio sound but nothing from headphones.
After updating my Windows 10 last night, the sound went out completely. Shortly after changing the speaker properties to 24-bit, 192000, the sound came back. However, it seems like any music I listen to no longer has any bass. Is there anything else I need to do to get my sound back to normal?
I have an HP laptop, and my sound card is (displayed using PCIutils for Windows):
Code: Intel Corporation 7 Series / C210 Series
and I am finding difficulties in getting stereo sound from analogical headphones (plugged in with 3.5mm jack). Drivers downloaded from HP or Realtex do not work, drivers supplied by Windows (although they are Realtek drivers as well) sometimes work, I mean: speakers and headphones are shown together at the mixer, and sound from headphones is not stereo. I then go to device manager, audio input and output, and uninstall "Speakers/ Headphones". I then reboot with my headphones plugged in, and, after that, the sound is stereo, and (IIRC) the mixer distinguishes between headphones and speakers.
But then things get broken back soon: one time, the windows updated the sound driver, and no stereo sound again. I uninstalled the device, rebooted, and stereo back. Then I unplugged the headphones, and windows said that no speakers were found: I restarted the audio device, speakers were found again, but stereo broken again.
Earlier today I was playing my usual online game when suddenly the sound stopped working. It had been working just fine earlier and I hadn't changed anything except maybe updating Adobe Flash. After a while the sound suddenly came back and then it disappeared and hasn't returned. I've been looking through all the Device Manager and Sound Control, but nothing seems to be working. When I slide the sliders in the volume mixer Speakers/ Headphones and System Sounds lights up green. In the sound panel on the speaker icon there is a green check mark. This is all happening on my pc not my mac. So I'm not sure if I pressed a button during my gaming or if adobe flash might've messed up something. I've posted this thread here because everything I looked up points to Drivers, but to me it seems like they're working???
After upgrade to w10 the sound via the HDMI port went missing. On this machine you press a button to switch from PC Mode to Game Mode, which activates the HDMI port where the PVR is plugged in. When viewing a PVR program (TV show), the video is perfect but there is no sound. I have updated drivers, rolled back drivers, & tried everything I can think of.(besides the PVR audio).I have an HP Omni 27 1055 Desktop PC.
Since installing Windows 10, the sound will cut out every so often, usually while watching a video on YouTube or I've downloaded. If I reboot the sound works. I notice that I can't left click on the the task bar when this happens. To reboot I need to right click on the Start button. I tried updating the drivers (Connexant Smart Audio HD) but they were up to date.
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.