I'm having a myriad of issues after upgrading to Windows 10. I'll list them below along with what i've already done to resolve:
- Computer won't shut down.
Someone told me to disable something with the Gigabyte process on the Motherboard, didn't work. I click on shut down and the computer restarts instead.
- No sound except EXTREMELY low sound on headphones.
I've already tried installing the Windows 10 Realtek HD drivers but nothing seems to work. Eventually I somehow got the headphones to play sounds but is is incredibly low even fully maxed out. All devices show that they are "working" correctly. Also, when I test it, I can see the green bar moving as if sound is playing, but no sound in any speakers / headphones I hook to the computer comes out.
- Less important issue but the "search" bar in the bottom doesnt ever return any results, ever. It just sits there indefinitely.
For a while now, I have had problems with Windows 10 every now and then where all of a sudden my computer will freeze for seemingly no reason.
Previously I posted this forum thinking it was my NVIDIA divers (because I didn't actually need them). BUT, today my computer froze again, and I have noticed something odd but common with all the times it has frozen. Allow me to explain:
I was on Facebook today searching through as you do, and my small (not smart) phone started ringing. As always, my acer speakers pick up this signal for some reason and start buzzing. I turn my speakers off and answer my phone, walking away from the computer. After about 5 mins, I come back to find my computer frozen.
This interaction with speakers seems to be common in the freezing of my computer. I can recall other times answering a call and coming back to find my computer frozen. Also, if I am watching a youtube video, and my computer freezes whilst the speakers are on, the speakers will make a loud noise (this hasn't happened so recently, can't quite remember noise to describe).
This MIGHT be the cause, however, this is still unknown, if even linked! This sound problem may even be linked with my previous NVIDIA problems (which I thought were causing this freezing) as on previous thread.
So after my problems with my Altec Lansing speakers (detailed on another thread) I decided to bite the bullet and just buy new speakers. Except that now there is a problem with that too.
I have a HDMI cable attached to my laptop so that I can use my TV as a second monitor. That's fine and dandy, except that the sound only comes out from my TV, not from my laptop speakers or my new speakers. I've tried to use Windows settings to adjust things but there doesn't seem to be any such option.
On my last computer all I had to do was plug and play, so I'm not sure why this is happening. It's quite a hassle because when the HDMI cable is attached, all my sound comes from the TV.
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
I just installed the most recent windows 10 tech preview last night; but my sound blaster pci express sound card did not get installed correctly or something because i am getting no sound at all. I roll everything back to the old setup.
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
I'm having a problem when I'm on my computer programming or playing a game, my system just shuts down by its self , and when I have closed all windows, its fine all day. Like I will be playing a online game and if anything is open it works for like 5 minutes then it just goes off, no sounds or any beeps, just goes off, I have just got a video card its a GT740 and I just got more ram witch I got at the same time and I installed it so now I have a better video card and 16gb of ram, would the video card not be setup right or its bad ram, This just started when I got the video card and the ram about a week then it started this, I don't know what to do about this, I'm running windows 10 64bit.. I forgot to say that the cpu is 3.50GHz ....
There are certain sound inputs that I do not wish to use.So, I disable them. However, when I reboot my computer all of them are active again. How can I make them permanently inactive?
I updated my computer to windows 10. when I upgraded and played audio, video on local computer or on any website. I could not hear music/ sound. when I play audio file through Windows Media Player, I get following error.
"Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
And when I play audio file using Groove Music. Can't play. We can' find an audio device for your PC Make sure headphones aor speakers are connected. For more infor search your PC for "Manage audio device".
0xc00d36fa ( 0xc00d36fa) |Close| (button).
When I go to manage audio device. I play test tone. and get message box saying that "failed to play test tone".
Sound comes through perfectly fine on my laptop's built-in speakers. However, when plugging my headphones into the 3.5mm headset jack, there is no sound whatsoever. The system recognizes that my headset is plugged in. In fact, the microphone on my headset functions perfectly when plugged in, but the headphones themselves are outputting no sound.
I tested the headphones on other computers and devices, and they work. In Device Manager, the device is listed as "Realtek High Definition Audio". However, the only sound device listed in Control Panel is "DTS Audio Control Panel".
I've tried uninstalling the audio device from Device Manager, and then reinstalling the driver from Realtek's website. However, this is met with the exact same results... no sound through the headphones, and "DTS Audio Manager" is installed in the Control Panel instead of Realtek HD Audio Manager.
If I navigate to Control Panel -> Sound -> Playback, "Headphones" is not listed as a device. Instead, Speakers/Headphones is listen as the sole device. Also, I ran DirectX Diagnostic Tool, and it returned absolutely no errors.
There used to be a sound option in my taskbar like everyone remembers, but I had recently installed X-Split and that is the last time I remember seeing it there. I have been on the forums and Google looking for answers but everything I find tells me to go to the settings and hit enable all. This was already checked off but even trying to select individual tasks it's not there.
Need to restore the option, volume is stuck at 37% and can't change it so I've had to use my neighbor's DJ equipment just to watch netflix at something I can hear.I went one setting down to Turn system icons on/off and sound is greyed out can't adjust that.
I was looking at a video on youtube, didn't do anything, all of a sudden the sound goes out. I make sure nothing on youtube is muted and it wasn't. So I right click my "SPEAKERS" icon (I'm wearing headphones) I click SOUND, then I click the SOUND tab, and the "test" icon is greyed out, meaning I can't click it. I haven't had sound in 3 days and nothings muted.
I installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
I have a fresh install on my PC and for some reason it doesn't detect my headphones, I've plugged them in the front and rear and still no luck, all drivers and software are up to date, They did use to work before the fresh install.
Since the latest Win 10 update I can no longer get sound to come out of headphones.
Before when I plugged in headphones the speakers were turned off automatically. Now nothing happens when phones plugged in except the speakers continue to give audio sound but nothing from headphones.
After updating my Windows 10 last night, the sound went out completely. Shortly after changing the speaker properties to 24-bit, 192000, the sound came back. However, it seems like any music I listen to no longer has any bass. Is there anything else I need to do to get my sound back to normal?
I have an HP laptop, and my sound card is (displayed using PCIutils for Windows):
Code: Intel Corporation 7 Series / C210 Series
and I am finding difficulties in getting stereo sound from analogical headphones (plugged in with 3.5mm jack). Drivers downloaded from HP or Realtex do not work, drivers supplied by Windows (although they are Realtek drivers as well) sometimes work, I mean: speakers and headphones are shown together at the mixer, and sound from headphones is not stereo. I then go to device manager, audio input and output, and uninstall "Speakers/ Headphones". I then reboot with my headphones plugged in, and, after that, the sound is stereo, and (IIRC) the mixer distinguishes between headphones and speakers.
But then things get broken back soon: one time, the windows updated the sound driver, and no stereo sound again. I uninstalled the device, rebooted, and stereo back. Then I unplugged the headphones, and windows said that no speakers were found: I restarted the audio device, speakers were found again, but stereo broken again.
Earlier today I was playing my usual online game when suddenly the sound stopped working. It had been working just fine earlier and I hadn't changed anything except maybe updating Adobe Flash. After a while the sound suddenly came back and then it disappeared and hasn't returned. I've been looking through all the Device Manager and Sound Control, but nothing seems to be working. When I slide the sliders in the volume mixer Speakers/ Headphones and System Sounds lights up green. In the sound panel on the speaker icon there is a green check mark. This is all happening on my pc not my mac. So I'm not sure if I pressed a button during my gaming or if adobe flash might've messed up something. I've posted this thread here because everything I looked up points to Drivers, but to me it seems like they're working???
After upgrade to w10 the sound via the HDMI port went missing. On this machine you press a button to switch from PC Mode to Game Mode, which activates the HDMI port where the PVR is plugged in. When viewing a PVR program (TV show), the video is perfect but there is no sound. I have updated drivers, rolled back drivers, & tried everything I can think of.(besides the PVR audio).I have an HP Omni 27 1055 Desktop PC.
Since installing Windows 10, the sound will cut out every so often, usually while watching a video on YouTube or I've downloaded. If I reboot the sound works. I notice that I can't left click on the the task bar when this happens. To reboot I need to right click on the Start button. I tried updating the drivers (Connexant Smart Audio HD) but they were up to date.
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.