Windows 10 Home 64bit, HP Pavilion dv7
When I play videos on Youtube or Vimeo or music on SoundCloud (which is as much as I tested), I hear a static sound. It happens the most often for YouTube, maybe 10 seconds, and less often for Vimeo and SoundCloud. This impacts headphones (Beats) and speakers.
How can I fix this static sound? I'm using, for all my audio stuff, IDT Audio.
Okay, this is a really weird one. For the last 2 months I've been experiencing this reoccurring issue on my new Dell XPS 13 laptop where 1-2 times a day, the audio will suddenly get extremely staticy. It generally will last at least 1 minute but sometimes significantly longer, and will affect all audio, including Windows alert sounds and even the "Playback device" test sound. This affects both the internal laptop speakers and any AUX device. I have not experienced the issue when audio is played through HDMI/DP, but I haven't been able to test it enough to know for certain.
However, there is one exception that I have only discovered today: the audio issue does NOT affect any files played through Win10's new default player, Groove. I have played exactly the same audio file on both VLC and Groove "even concurrently" to confirm.
I've posted a link below to an MP3 recording of it: [URL]
I've spoken to Dell and we have tried countless fixes that I've tried to list below, but the problem persists:
Fresh reinstall of Windows
Replaced motherboard (twice?)
Uninstalled Realtek audio drivers
Updated BIOS
Tried changing all settings in the Realtek HD Audio Manager
Probably 4-5 other issues
New computer built, using Windows 10. I'm getting static on every audio device/browser/software. I am also 95% sure I updated all drivers. But Microsoft denies me a right to have service due to custom build, and Kingston just blames Windows, as does Gigabyte.
Motherboard: Gigabyte G1 Gaming GA-Z170X-Gaming 7 (rev. 1.0)
OS: Windows 10 build 1151
Headset: Hyper X Cloud 2 with the latest Firmware update.
And a shitty Logitech that has the same problem.
Tried the audio jack on the mobo, case's front USB headers as well. Everything is static.
I got mine with everything installed. So if I uninstall and reinstall Realtek, I might mess this up more. I don't even know what version I have and I can't understand the terms used in the instructions.
Should I just wait for a system update form Microsoft. Or do I really have to uninstall my audio software?
I have Realtek Audio HD driver for sound installed on windows 10. For about a week, my laptop ran with no problems. However, last night there was no sound output into my headphones. I unplugged my headphones, plugged them in again. Still no sound.
I tried my headphones on different computers and phones and sound worked normally. I then tried a different pair of headphones on my laptop and no sound was coming out. The speaker is still functioning normally.
I have since restarted my laptop multiple times, and each time I restart a message saying that "You have changed your settings in BIOS setup. Would you like to restart your computer to apply these changes?"pops up.
Sometimes, my headphones somehow come to life, and sound is able to be played. However, when this occurs there is a lot of background static noise, although the sound quality itself is very good.
my hard drive seems like it's always working overtime in the background making that sound that tells me something is running idon,t know what can be running that hard in the backround but it is causing my computer to run like crap i just did a factory rest an did a clean install on this computer because of that an now it is still doing it.i can,t be a software issue because it was doing that before i reinstalled any of my software.
View 12 RepliesJust like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 RepliesI installed windows 10 for my Asus laptop(which was running windows 8.1 pro and the mic worked perfectly) , and the microphone just doesn't work. I tried to install the latest win 10 drivers for Via, and that didn't work. Are there any fixes for this problem, or am I just out of luck?
View 1 RepliesToday I updated my laptop to latest build of windows. After that I found "No Audio Output Device Is Installed" message. I reinstalled audio drivers from Dell (Audio_Driver_PKGMR_WN32_6.0.1.7564_A01) Still no sound. I checked device manager it shows, Other Devices-High Definition Auduio-PCI Device, both have exclamation mark in yellow triangle. (See attachment) I am puzzled what should I do next.
View 4 RepliesI have upgraded to windows 10 about a week ago but everytime I turn my pc on, it says HVECK is not supported by this OS. My audio driver is VIA High Definition Audio driver. It seems like they dont have an updated driver for windows 10. What do I do? Can I change to Realtek instead of VIA? I mean is that possible to use a different audio driver? Like, uninstall VIA completely and install Realtek?
View 4 RepliesI'm using a Surface Pro 2. After my upgrade from Windows 8.1 to Windows 10, I'm not getting any audio out from the DisplayPort. I use DisplayPort to HDMI to a receiver. I've upgraded to the latest RealTek audio drivers, but it's not working. Could there be a different driver issue at play?
View 4 RepliesI installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
View 6 RepliesI installed W10 on my laptop yesterday, a friend has problems with his copy of W10. Everything is fine for me, and he has now put W10 on again and all seems to working EXCEPT, he has not got a volume control icon in his taskbar - although sound IS working. I researched and told him about the wheeze of changing the text size in display - which has resolved that problem for many folk, but he found he could not move the cursor along the bar, and has also noticed that although the volume is set to 'on' where you select which icons appear in taskbar, there is a message saying 'audio service is not running'.
View 2 Repliesso i just wanted to install the lasted version of the driver and when i try to install the driver it will keep on restarting over and over again after it says its done and needs to restart and when the computer turns back on it does the exact install over and over again and it never finishes but my realtek driver still works.
View 1 RepliesToday, I upgraded my Toshiba Laptop to Windows 10, it was previously windows 8 but the computer was windows 7 default. My sound was working fine until I installed Windows 10..I upgraded to Win10 and I played a youtube video and I hear choppy glitchy like sounds few once in a while.. How do I stop it from chopping out? My brother has the same computer as me and he upgraded, his doesn't make the choppy sound. I tried with his headphones in my computer, it still occurred. How do I stop it from chopping out?
View 8 RepliesI just recently purchase a newish laptop recently off eBay. Its a HP ProBook 6470b, it didn't came with a hard drive so I pulled the SSD out of my old Dell 1545 which has windows 10 preinstalled. Long story short when I listen to music over Bluetooth to my stereo, the sound become very choppy and distorted. Specially if I do some typing, extreme processing or moving the trackpad it becomes really bad. If I don't type, move my mouse or have it idle on the music player its fine (most of the time).
I should mention at this present moment I don't have a hard disk caddy since I didn't come with one and I'm waiting it to arrive from Malaysia (so I'm just curious if that could be a culprit). I have tried different Bluetooth speakers and the same problem persists. I have tried my macbook, android tablet, surface and phone with the same reciever and it play musics without any problem whatsoever. I have tried updating, uninstalling and installing drivers and hasn't made that many difference (although disabling the Microsoft UE LE Eliminator useful somewhat). The driver is a broadcomm 20702 Bluetooth 4.0 adapter.
I have disable any enhancement in the sound settings and gone to devices and printer and disable any unnecessary services that is used by my bluetooth receiver but the problem is still present.
Just as the titles states; why is it that every time I reboot with windows 10; it wipes out my sound? This once again is on a sound blaster x-fi titanium pci express sound card.
View 1 RepliesI currently have an Asus Vivopc desktop that I use as an htpc and it is connected directly to my LG LB5800 tv. The PC has onboard speakers which sound terrible and when I connect the tv via HDMI, the video works fine but no sound comes from the tv.
I still get sound from the PC but no matter what I can see, there is no option whatsoever to have the TV as a playback device. It isn't listed at all. I've reinstalled the intel and realtek drivers but that didn't work. I've opened up the playback devices, shown disabled devices and it didn't show up either.
With Windows 8 it worked flawlessly. With Windows 8.1 it would only work when I rebooted the computer with the TV on, otherwise the device would disappear as soon as it was turned off. With Windows 10, it just isn't there at all.
Since upgrading from Windows 7, I have not been able to find an easy way to switch between audio devices easily on Windows 10. What I'm trying to do is switch between my system speakers and headphones. The only way I can find to do this is to right-click the speakers icon in the taskbar, select playback devices, right-click either "speakers" or "headphones" and select "Set As Default Device."
From then on, all sounds are routed to that device. But I have to do this every time I want to switch between headphones and speakers. I think on Windows 7 there was a way to route all sounds through BOTH speakers AND headphones. I could then just use the physical device's switches to control where the sound comes from. I haven't found a way to do this on Windows 10.
I just upgraded my ASUS Laptop from Win 8.1 to Win 10 X64. (It has Via HD Audio)
Initially, sound worked but the microphone didn't. I fussed with many settings but nothing seemed to work.
I uninstalled and reinstalled the drivers, then the mic seems to work but sound doesn't.
Some of the events that I have encountered are: One message said "Windows has detected that Audio enhancements for the following device are causing problems". I disabled all enhancements but nothing changedBased on other posts, I tried to change the default format to 16 bit and other Hz. Nothing worked.I tried to play a test tone in the speaker setup and got the message "Failed to play test tone".I tried to update the drivers but was informed that I had the latest drivers
I went to the VIA web site to look for new drivers but there are none listed for Win 10.
Is there something else that I can do or is it just a matter of waiting for new VIA drivers? (VIA HD Audio is such a common audio chip that I find it hard to imagine that VIA and Microsoft haven't solved the driver problem - particularly given the Insiders Hub process!)
On my HP pavilion notebook the end of the headphones is stuck in that jack, currently I have a tool coming to repair that. Is there a way I can disable my audio jack. Headphones is not coming up in playback devices. The only thing that is is. Speakers/HP. I tried installing realtek software it will not install. It says it is installing the headphones than I switch it to the speakers as the default but then it switches back to the Speakers/HP.
View 1 RepliesEver since I upgraded from windows 7 to windows 10, I've been experiencing brief audio popping/cracking noise. Sometimes I could go an hour and not hear anything, other times I hear a pop every 30 seconds. There has to be sound playing for the popping to occur. Its brief, but can get annoying when listening to music.
I have tried many things including:
-Updated drivers (Realtek HD Audio)(AMD GPU drivers)(Realtek Network Card)
-Tried disabling Realtek HD Audio since it doesn't effect USB audio
-I do not have a WiFi card so its not that
-Its not a DPC Latency issue; No spikes from LatencyMon
-Disabled sound enhancements from playback devices
-Its not the headphones themselves as they work fine on other sources
-I tried an old set of ear buds that weren't USB and they seemed to work fine so it may just be USB audio.
I do have a Dell XPS 435t/9000 that's about 4 years old with some hardware changes like PSU/GPU etc., maybe its the motherboard? (Though that's kind of a stretch). Dell says that certain computers don't support windows 10 upgrade, but I feel like that's just so they don't hold you responsible if you do upgrade, as everything else works perfectly.
I have a SteelSeries Siberia 650 headset and I'm using their latest drivers/controllers to handle the audio from my computer. The thing is I'm facing a weird problem since then.
Everytime I restart my computer (using the 'Shut down' option and turning it back on), my speakers come muted, just as the image shows:
If I use the 'Restart' option it comes back alright:
Here's an image of my 'Recording devices' tab:
This is how my device manager looks like:
And finally SteelSeries controller:
So far I've tried reinstalling the original headset drivers and I also tried using the 'Uninstall' option under the device manager. None of them worked.
I have a scanner radio that I input to the desktop pc via a USB Port. Then the pc outputs it on the Green audio jack to a pair of desktop speakers. Works fine.
Now let's say I have another radio output which is inputted to the pc via the pc Line In Audio jack (Blue).
How can I switch between them to the speakers ? Both come up on the Speaker Icon in the bottom task tray as being enabled, but not sure how to switch which one (only) actually goes to the desktop speakers (if both radios are working).