Drivers/Hardware :: Synaptic Error In Dell Inspiron 5547 After Updating
Aug 9, 2015
After updating win 10 from 8.1, am getting the frequent pop when ever i use the touchpad. (pic attached)
1) Resinstalled driver, still popup continues
2) using autorun app, i have tried to remove the entry (It stops the popup but the Dell touchpad utility is not starting up, so I cannot use the scrolling and the gesture support)
3) Again I turned on the services from autorun, popup came again
4) Tried cleaning registry by ccleaner, still the issue persists.
5) Tried to reset windows, but tat also not happening (boot device failure)
Laptop : Dell Inspiron 5547
Driver : Synaptics touchpad driver V19
OS : Windows 10
I've just done a clean install of W10 on my Dell Inspiron 7537 laptop. I turned off the laptop last night when the battery was about half discharged.
I tried turning on the laptop today after it had been off 18 hours and it was completely dead - there was no response to the power on button and no charging light despite the charger outputting the correct voltage.
I read online about removing the battery so I did this. I removed the battery, pressed the power button for 60s then plugged in the power lead and hey presto the laptop started! I then put the battery back in and started W10 fine. The battery showed 56% charge so the battery wasn't flat.
I can only think there was a poor battery connection which prevented the laptop starting and removing and replacing the battery cured this.
I had been under the impression that if you had a PC with UEFI (instead of the legacy BIOS), you couldn't boot from a CD or DVD drive. Having just gotten my first PC with UEFI, I was delighted to find this Dell article on how to do it here:
[URL]
I followed that procedure on my new Dell Inspiron 15 5559 laptop, and booted Linux Mint successfully from the DVD I have it on. One of the considerations is that you have to disable "secure boot". Not ever having had that before, I didn't hesitate to do that. I imagine that would be a handy feature if you were worried about boot sector viruses, but I've never seen but one instance of one in 35 years of working with PCs, and that was on a neighbor's PC. I also noticed that booting was considerably faster.
As the title says how exactly do you achieve this?
I have an ISO Ran RUFUS 2.6 GPT Partition Scheme for UEFI Fat 32 8192 Default X Quick Format X Create a bootable disk using X Create Extended label and Icon Files
so the next part is the Kicker Dell did a number on their Bios and rather than using standard logic as we have done so many years just setting the boot order to "Boot USB" first, you "Only" have the option to create a "Boot Program"!!! so you select your USB Drive then which ever file you want it to boot I'm Assuming? So I tried selecting Setup, bootmgr.efi, and autorun with no results!
I get the secured boot error crap, turn that off and I get Legacy BIOS (that defeats the entire point) What the hell happened to Win95 Boot Discs and FDISK?
I am so frustrated with this garbage, I found out the hard way with Windows 10 and trying to nuke the SSD and put a clean install of 8.1 on it.
When I select "Camera" I get a white box, with one word printed in the upper left hand corner,"Camera". This appears for two seconds and then I am back to my desktop picture.
I recently upgraded my Dell 2320 Inspiron all in one to Windows 10 and since doing so I am greeted with the limited internet connection problem (wifi). I have tried the TCIP reset suggested in another forum I read however this has not resolved the issue. What I can do as this is my home office computer.
I have a relatively new Dell Inspiron 7000 series (7548). Installed Windows 10 and about 15 seconds after logging in I keep getting an error message about an internal power failure. What an absolute f#$% up. I have never had a problem with the laptop. I tried the Restore System Point option but it says that there aren't any system points saved.
On my wife's AIO (Dell Inspiron One 2330) the Start menu wasn't available on her non-admin user account(but was ok on my admin user account).My XPS8100 wouldn't awaken from sleep properly (labored without real progress).I reinstalled Win10 on both PCs last night (about two hours each) and all is well. Here's the link: URL....Use the Download Tool Now button and follow the simple instructions.
I own a Dell Inspiron N5547, updated from W8.1 to W10 Pro a few days back. The Dell Touchpad came installed with the upgrade, and for the first 2 days, all the gestures were working perfectly. On the third day, the three finger scroll up (for task view) stopped working and invokes Cortana instead. I went on the Dell Touchpad program and tried to untick the three finger tap for Cortana, but to no avail. Its really annoying, I tried to restart my latpop but faced the same problem.
I tried to search for solutions, one included uninstalling the Dell Touchpad from Programs and Features, then downloading the latest version from the Dell website. I did so, and installed it again, and once again for the first day the three finger scroll was working perfectly, but when I woke up the next morning, it started invoking Cortana again.
I have been using this version of windows 10 from last 1 month. I installed all the drivers and everything was working just fine. From last few days my wifi driver isn't responding. I tried reinstalling the driver but the problem still exists.
I can connect through the Ethernet cable and the Bluetooth driver is also working. Only the wifi driver has stopped.
I have dell Inspiron 3537 Laptop recently update in windows 10 before it was using windows 8.1 that time my laptop gesture touch pad was working when I scroll in our touch pad with 2 finger it was working but now is not working. My touch pad driver already installed and update.
Yesterday I updated my OS from Windows 7 to Windows 10. All seems to be working swimmingly apart from the sound, which doesn't work at all. I checked the drivers and it says that they've been updated yesterday along with the OS change. Oh, I use Dell Vostro V131 laptop.
I have a Inspiron N5010 with built in Bluetooth (DW365). When I upgraded to Win 10 It no longer works. It does not show up in device manager or anywhere else.
I have found where some people have used a driver ( Broadcom 4.0 ) and had good results. When I try to install the driver It tells me to uninstall the old one. How to uninstall it when it does not show up anywhere on my computer?
Halfway through the installation, it reverted back to 8.1, and I got this message. [URL] .... The troubleshooting tips leads to [URL] ...., which is useless, and this has happened three times. What do I do?
I already tried disabling my antivirus and all startup programs but that didn't work. Windows 8.1 Enterprise, Lenovo Thinkpad...
My problem is very similar to one described by tomzino earlier this month in this forum. Since upgrading from windows 7 home premium to windows 10, my computer gets a BSOD and reboots daily; so far in November it has crashed 20 times. The only days it didn't, the system was powered down. The error message is the 'bad pool header' . Oddly, 85% of the BSODs have occurred between 12:12pm and 12:43pm EST. I ran the DM Log collector to gather the information from the last two crashes for diagnosis.
Have had this error for a couple days now. Tried regular checks to verify system components and online image and windows update service diagnostics, cleaned up SoftwareDistribution, turned off non-Microsoft auto starting services, - all to no avail.
Also, ran netfxsetupverifier, which gave me the only error - aspnet.mof missing, which I presume is OK.
tried updating AVG anti virus but update failed: update detect running installation. Complete that installation before starting update not installing or updating anything at the moment.
I've been trying lately to update my Window 10 Laptop (previously Windows 7) to the latest build through WMCT (Windows Media Creation Tool), but I failed three times,
I downloaded the WMCT from Microsoft website. For the first two times I ran it, it failed through the updating windows phase (copying data, installing drivers and features, and a third one).
I tried deleting the content in Window/SoftwareDistribution/Download, and re-running, but also failed at the beginning of "Installing Drivers & Features". I am able to download everything and "preparing to install" normally, but it is just at that phase where I get a message saying "We are restoring the previous version of Windows".
Here is a snap of the error I just got after successfully "restoring to the previous version of Windows".
A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." He sent me a screenshot of the error but for reasons I don't know, Tapa Talk isn't allowing me to send the image. The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."
Originally the DVD drive would not show at all in File Explorer, despite Device Manager recognising, drivers up to date, etc. Dell diagnostics reported various feedback ranging from perfectly ok (SupportAssist, on-line smart diagnostic quick test) to failing some tests (on-line optical drive tests) and requiring attention (sadly, the attention it suggested I use was a 'fix' tool on the Microsoft website that would not run on Windows 10 operating platform so I have not been able to persue further)
Things improved a little after downloading and installing all of the urgent and recommended Dell updates, plus installing all of the Windows updates. Now the laptop shows the drive in File Explorer, and occasionally media is recognised and even played. For example, inserting an audio CD into the drive immediately after booting up will run autoplay and the tracks are displayed as expected in File Explorer.
However, subsequent CDs (or any other media) are not recognised. The drive 'acts' like it should (led goes on, whirring sound made, etc) but nothing happens. File Explorer displays whatever the previous media contents were.
So for example, if I insert an audio CD with 10 tracks immediately after booting, the CD will autoplay and the 10 tracks will display in File Explorer. Everything seems fine. If I then eject this CD, and put in an audio CD with 5 tracks, File Explorer will continue to display the 10 tracks from the first CD. The new CD wont autoplay. Its basically not recognised.
This is quite frustrating because it means I have to reboot every time I want to change media.
