Drivers/Hardware :: Synaptics Off After Restart Explorer
Feb 23, 2016
I found a problem in my pc (Windows 10 Pro 64 bit ver 10586.104 [not insider]) that: When I start up computer, Synaptics startup too, and that what I want, but while playing some game, I have to adjust the resolution lower (HD), and after that, I turn it back to normal (full HD). Therefore, some object in that desktop and taskbar didn't diskplay correctly so I have to restart explore.exe in task manager, but after I restart explorer, synaptics didn't work any more (the icon in the taskbar is disappear,too). (Note: Include can't use 2 finger zooming, rolling, ....) how to start Synaptics back again ? (I can't find where to start Synaptics if it crashed or ended)
View 3 Replies
Similar Messages:
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Sep 12, 2015
I understand i have asked this before, but my touchpad still refuses to disable. i have tried 5 different versions of the synaptics driver, and i believe im currently running on the best version (according to my laptop). If I go to control panel and disable it from there its still no luck. its making me regret my decision to update as it worked perfectly before.
View 6 Replies
Aug 9, 2015
I have a HP Pavilion laptop with Synaptics Touchpad V7.5 on a PS/2 port. The driver version is 19.0.12.95.
After installing Windows 10 and updating all of the drivers, I tried playing a game and found that I can't use my keyboard and mouse at the same time, so I turned off PalmCheck and tried to continue- but it still does not work.
I have also tried to go into the Windows 10 version of the setting and set to 'No Delay'.
I've tried to update my drivers but every time it says I already have the best version of the drivers installed.
Here is an image of what my settings have been set as (from another user that hasn't received a reply). But after exiting and pressing apply, it saves the settings but I still can't use the mouse and keyboard at the same time.
View 3 Replies
Jul 9, 2015
I just upgraded my windows 7 original install on my Toshiba Laptop (3 years old) to the Windows 10 Home Preview Build (10130 was installed). Everything appears to be working EXCEPT my touchpad will not scroll. It is a Synaptics V7.5 on PS-2 port. I went to the Synaptics website and don't see a windows 10 driver for this...How can i get the scrolling to work on the touchpad (everything else seems to be working on the pad)..
View 9 Replies
Aug 9, 2015
Another issue tell me if u can solve this . Iam having synaptics touch pad in which scrolling feature is not working in win 10 ,was working in windows 8 .
View 7 Replies
Sep 30, 2015
I just upgraded to Windows 10 and have discovered a problem that I can't seem to fix. When I Right-click on my Touchpad, nothing happens. This was very useful when I need to fix a word spelling & get options for the misspelled word.
I have an HP Pavilion using Synaptics Touchpad.
View 9 Replies
Aug 21, 2015
How do i stop my synaptics pointing device freezing after starting PC? Was OK before WIN 10
View 2 Replies
Sep 7, 2015
My laptop touchpad scrolling stopped working this morning after I updated my gpu driver. I went to the packard bell website and looked at the touchpad drivers for my laptop. There is a synaptics one and a elan one.
I have them both installed on my laptop but it still isn't working and there is still no virtual scrolling option in synaptics. These are the options that I have in the synaptics settings:
This is what it should look like:
What do I have to do to get the scroll trackpad feature to work again? P.S, when in device manager, even though there is an ELAN tab in mouse properties, Only the synaptics driver shows up under the mice section in device manager. Does this mean that the synaptics driver is replacing the ELAN and I need them both for the scroll to work.
View 1 Replies
Sep 13, 2015
Today I updated my win8.1 to win10 on Lenovo Y580. Everything works perfectly fine, but I make a habit of switching to previous/next pages in chrome by swiping 3 fingers to the left/right. It has been this way since windows 7. Now swiping changes tabs in win10 (like alt+tab) and it's really irritating.
Is there a way to change the registry in Synaptics to previous options or am I doomed to work with backspace?
View 1 Replies
Oct 1, 2015
I recently upgraded directly from Windows 8.1 64-bit to Windows 10 and I am having some problem with my Ethernet Adapter. My Ethernet Adapter is a Killer e2200 Gigabit Ethernet Controller, which is built in to my motherboard (MSI Z87M GAMING). When I first installed Windows 10, I found both a software suite and just the drivers themselves on the Killer website. I first tried the whole suite, but it didn't really work very well, felt unnecessary, and basically didn't seem to actually install any drivers. I then used the actual .inf file for my Ethernet Adapter to install manually. I uninstalled the driver and software, and then installed the driver manually through Device Manager by saying "have disk" and navigating to the folder and selecting the .inf file I downloaded. This works, but I have to repeat the process of uninstalling and reinstalling the driver every time I restart Windows.
There are additional variables that could also contribute to the problem. I am using one of those adapters that plug into the electrical outlet to extend the Ethernet line to reach my basement. I don't know if this really should have any effect on my problems, but I figured I should mention it. The product is made by TP-LINK. I also have VPN software on my computer, and part of running the VPN software is having it install a "TAP-Win32 Adapter V9" driver under Network adapters in Device Manager. This could be contributing to my problems, but I do need to have access to my VPN. I did not experience this problem at all under Windows 8.1 using the driver install disc that came with my motherboard.
View 2 Replies
Aug 14, 2015
The settings windows for my ELAN pad is empty. When I change the registry settings then the entrys are visible, but after restarting windows these settings were reset and th window is empty again. What to do, to prevent these changes?
View 4 Replies
Sep 15, 2015
Basically i lost everything on my external HDD & the only way to get the drive working again was to format it, That fixed the problem the drive was having (Unknown why data got lost) but if i disconnect the drive & reconnect i get message (the drive is inaccessible & corrupted) Something like that cant remember the wording exactly as its not happening right now, but i know the problem will come back & i will once again lose all my data, as its happened 5 times over 2 week period..
If i restart the PC, after startup its the only drive that's not visible either in (This PC), (Disk Management) or in (Device Manager) which leaves me with no option but to disconnect & reconnect the drive in order for it to be visible & Accessible, Now sometimes it works fine but once it becomes inaccessible it stays that way unless i format it Losing all data once again ...
Relevant Information of Drive
3 Years old
On 24/7 (As i never turn PC Off)
Its a Iomega eGo 1Tb External HDD
I Used software Hard Disk Sentinel & it says the drive is Healthy & in good working Condition
View 9 Replies
Nov 24, 2015
If I leave Western Digital My Book plugged into a usb3 port at shut down there will be a restart in a few seconds.
This has been the action through both versions of Win10. (Currently on the 2nd version as of Nov.20) At this time the only items that allow restart are mouse, keyboard and network adapter Fast Start is turned off An extra usb3 board was installed during the first Win10 but two usb3 items cannot be inserted side by side.
One will read as a usb2 if two are inserted into the new 2 ports in the rear. This My Book now is the only item plugged into that back USB3 port. The drivers for usb3 appear to be current according to the mfg site. When this external is ejected then the computer shuts down. On Win7 pro this external could be left plugged in all the time.
Is a line of attack to remove this new usb (2 on front, 2 on back) and start over with another?
View 9 Replies
Sep 22, 2015
Problem back with 10547. Windows Update trying to install 15 year old driver for printer. Previously hid the update with Wushowhide and it was gone for months. Back again this morning. Reran Wushowhide and it showed the update was hidden but still there after restart.
View 1 Replies
Nov 13, 2015
I upgraded to Windows 10 everything seems to run fine but system will not restart from the restart selection on the start menu. Windows update will not reboot automatically either. System looks like it is going to reboot, everything shuts down but as system trys to restart everything freezes. Only way around it is to do a hard shutdown by holding the power button. Updated graphics card,hard drive and bios but still no luck.
View 1 Replies
Jan 15, 2016
I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
View 1 Replies
Nov 3, 2015
I have just bought two new SanDisk 32 GB USBs and when I insert each of them in my Vaio laptop, it show as duplicated - showing "This PC - removable disk (E) and the other just removable disk (E). Even the contents I have put on one have been duplicated. if I can just continue by saving to one of these drives, or am I building up future problems for myself by leaving it as it is? (03/11/15)
View 3 Replies
Jan 20, 2016
File explorer is struggling with my 2 external WD My Book 3TB HDD
Problems: 1 of the drives will keep running randomly all night (and gets real hot) after PC shut down. When trying to write a batch to one of the drives explorer keeps trying to access the drive, cannot open it and becomes unresponsive (task bar icons disappear).
View 2 Replies
Jan 21, 2016
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
View 3 Replies
Dec 22, 2015
Until I upgraded to Windows 10 I could access CCTV via the internet W/ Internet Explorer. I need to download an OCX file but windows won't allow it.
View 1 Replies
Jan 31, 2016
My setup before the problem was:
- Windows 8.1 in a 250GB SSD with Linux dual boot
- Secondary 160GB HDD (fs: ntfs, type: primary)
- Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
[URL]
View 8 Replies
Dec 31, 2015
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 Replies
Jan 29, 2016
I'm running Windows 10 Pro, Build 10586.71. Why I have my external hard drives showing twice in File Explorer (see Attachment) ...
I've had this since the first install of Win 10 ...
View 1 Replies
Nov 21, 2015
I just installed Windows 10 fresh and noticed that two of my Harddisks are not showing at the left menu in the Explorer.I have 3 Harddisks and only Harddisk D: ist showing. When i connect a USB-HDD it shows up instantly.
View 9 Replies
Dec 1, 2015
I just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
View 9 Replies
