What that page is called, but when I want to change save locations, none of my drives show up. It worked before but now it just doesn't want to display anything sadly. Here are a few pictures of what I am talking about.
My drives wont show up in this section either...
The thing is though, they display properly in the "This PC" Section so I know they are plugged in correctly.
Windows 10 really likes to start up my storage drives. I have them set to sleep after one minute in the balanced power profile but not long after they spin down something else causes them to start up again.
They will eventually turn off but spin up again at a later time for no reason. I see that there is no data being written to them in task manager.
The File Explorer program displays all my "lettered-drives" twice.
View 4 RepliesWhen moving Library Files and certain Users files to D: storage drive, Can Documents, Library, Pictures, and Video Folders be moved and combined to 1 main folder, with same location path? Or do they have to have different location paths and create 2 sub Documents folders under 1 main Document folder?
View 3 RepliesI am really missing the ability to easily see how much storage space is left on each of my drives. Why is this not easily seen just by opening "This PC" like it was in Windows 7. It seems like I have to click on properties in order to see disk usage.
View 6 RepliesTrying to install Windows 10 on Thinkpad T60 2004-4AU, don't have a hard drive in it so I am using a 64GB SanDisk Glide flash drive and it does not see it, it says "We couldn't find any drives. To get a storage driver, click Load driver."
View 6 RepliesI've been using Win10 since the general release. This was an update install on a Win7 laptop.Apart from a few issues (waking from sleep on scheduled tasks, lack of control on updates) I have a problem with external devices.
If I use several USB flash drives/harddrive I'm able to eject one or two but then I can't eject any others. When this happens I don't get the menu option to eject/safely remove the device through "explorer" and the drive doesn't appear in the "safely remove" icon on the task bar. I can still access the drive without issue just don't have any way to eject except to shutdown the laptop. If I reboot the laptop but leave the device attached the eject option reappears.
The laptop is fully patched and I can't work out what is happening and google hasn't revealed any similar problems except the normal "device is in use" message.
Is there any software that can block USB storage on PC but not the mouse and WiFi adapter connected?
Also, is there a way that I can get notified in any ways when someone connects a pen drive or phone to the PC?
I upgraded from W8.1 to W10. After the upgrade my mirrored volume was 'gone' (created with disk management). Fortunately I was able to restore the data on one of the disks.
I cannot manage to recreate a mirror on Windows 10. I tried using disk management as well as Storage Spaces but I get errors when the formatting begins.
Even with new disks, all the same it does not seem to work. I can not figure out why...
I get: Cannot remove Storage Space (huh.. remove?? I am creating one!!).... Parameter is wrong: 0x00000057.
Could there be some history of the previous mirrored drive which is preventing me from creating a new one or should I just do a clean Windows 10 installation?
I want to add extra storage to my Surface Pro 3. I have 128gb on my HDD and would like to add at least another 64gb.
Would I be better with an SD card or Flash Drive?
My Screen is displaying off center to the right just a little. I only found one other mention of this on another forum with no solution. There is a black strip on the left hand side of my screen. The other post was on a MS forum they theorized it had to do with the Intel HD device driver. I did not have this problem with Windows7. Hope the graphic card I have coming will fix this.
View 6 RepliesI've about 4 SATA HDD's that I've removed from computers that I've junked -- all SATA about 12 TB.
Is it possible to build an enclosure and create a NAS drive -- I can easily make external USB drives but I think a NAS storage system would be better. What I need to do --should in theory be easy just need some sort of network card and an OS.
I'm running Windows 10 on a desktop (64bit). For some reason some of the keyboard buttons are displaying the wrong item when holding down the shift button.
E.G.the@button shows"and the"button shows@ ....
There are other buttons doing exactly the same.
This problem started when I moved my system from a Small Business Server to Windows 8. As part of this move I changed out several components (motherboard, CPU, memory, added a HDD). I only connected the drive I wanted to install Windows 8 on. When I did so it said I did not have a proper boot disk (don't remember the exact phrase). Anyway, I connected all of the drives back and then the system booted just fine into Windows 8. I then noticed only 3 of my drives were visible to Windows. I tracked down the missing drive, disconnected it thinking it was bad and tried to boot the machine. No dice - missing boot drive. So, I figured out the boot.ini and other required boot files resided on that drive while Windows was on another.
Fast forward to present day. I have upgraded to Windows 10 and I now want to install an SSD as the primary drive and remembered...I still have this issue of a 1TB drive that is just sitting there taking up SATA cables and a lot of available space just to be the boot drive. I've come to the conclusion I have two options - clean install Windows 10 with just the SSD installed to force everything there during that process (I hope) or (my preference) move the boot files from the wasted drive over to my current OS drive and then simply clone that drive onto the SSD.
I had 3x 3TB drives in a parity pool. It started to fill up so i added a fourth 3TB drive and months later one of the original 3 began to fail on me. Performance was slow, then slower, then it showed disconnected.
I retired the drive and added a replacement, literally the same model 3TB drive. I cannot however, get it to remove the failed physical disk and repair the pool. I even tried adding another 2TB drive i had available in case it needed the extra space (didn't make sense but i was reaching).
I get the "drive could not be removed because not all data could be reallocated. add an additional drive to this pool and reattempt this operation."
I have searched a lot and don't really seem to be getting anywhere. The only way i was able to retire the drive was through powershell. I'm assuming it's a GUI issue and perhaps i'm not approaching it correctly via powershell. Attempting to repair virtual disk didn't work.
I really don't want to lose this data. I wasn't able to backup much before the drive failed completely.
Can I use a system image after raiding my hard drives? Or do I need to reinstall everything myself.
View 1 RepliesHow to move up or down " hard drives within the System Protection "
Picture is provided, I like to permanently move the C: Hard Drive above the D: Drive maybe there is a windows registry adjustment or something?
Windows 10 LTBS-N (64-bit)
I have two hard drives (C: and E. Normally I have windows 10 installed on C: and just my documents on E: drive.
I had to reinstall windows. The reinstall put the Boot on C: and the System on E: drive. (See image.)
Is there any way of putting the system back on C: drive? (I didn't want to reformat both drives and reinstall windows again if I can avoid it.)
One read-only DVD that will write CD's. Other drive is read/write CD's & DVD's. When trying to create a system repair disc, message says no cd/dvd drives found. ???
View 8 RepliesI have a Windows 7 PC with 3 DVD drives. Imgburn shows them as connected to 3 different SATA busses: [2:0:0], [3:0:0], and [4:0:0].
After upgrading to Windows 10, all of them ended up on the same bus, [2:0:0], like this:
Why did that change? I tried connecting them on different SATA plugs, but they are always shown on that [2:0:0] bus. The thing is, I really need them to be on different busses, because of a particular requirement of a legacy application I use.
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
View 1 RepliesWhy my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
View 3 RepliesI've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
So I have set up my SSD and using it for my OS (Win10) and my F drive (1TB HDD) as a drive for my programs and documents, however when I try to search for items vis Windows Start Menu it only shows items for my C drive, how to make it to search both drives for documents/files?
View 6 RepliesLately, every flash drive I've bought requires to be NTFS formatted. Quick formatting gives me the option to change allocation size. Is there a specific size I should be using or just go small?
View 4 RepliesI have several hard drives on my PCs; some are physical, some are partitions. In every PC I've upgraded, W10 marks these as RO. I go through the ritual of setting permissions to Full and marking RW, but occasionally a drive will revert to RO. I can't find a Take Ownership option for drives, only folders. Am I looking in the wrong place?
View 6 Replies
