Drivers/Hardware :: TV Monitor Reboots Randomly?

Nov 9, 2015

for a month or so I have a samsung tv-monitor (27 TV monitor with the blue Touch of Colour (Black) (LT27D390EW/XU) | Support | SAMSUNG UK ) . Problem is that sometimes (rarely tbh -like once a day) the monitor reboots itself (the screen for 1 sec turns black in my next sec throws the Samsung logo and then it comes back to where it was before.

The monitor is connected to hdmi cable at 1080p resolution and I also have and an internal S / PDIF cable to get the sound passing from the motherboard to the gpu.

I sent the monitor to Samsung where they told me that this is a software problem that comes with windows 10 and that as far as they are concerned there is no solution to this other than reverting to windows 7. I had already installed windows 10.I have already tried installing the drivers that Samsung have on their site but it wont fix the problem.

View 4 Replies


Similar Messages:


Performance :: Windows Crashes To Black Screen And Reboots Randomly

Feb 10, 2016

I'm experiencing a strange problem on my secondary desktop (the crappy Alienware). Randomly, the machine restarts within a mere 5 minutes of it running.

It also restarts just sitting on the login screen, so it doesn't only happen when someone is logged in. It, of course, doesn't do this in Safe Mode.

View 2 Replies

Drivers/Hardware :: Eizo EV2750 / Windows Not Reading Monitor EDID / Only Recognizes As A Generic PnP Monitor

Feb 10, 2016

I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.

I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.

The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.

Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).

View 3 Replies

Drivers :: Thread In Device Manager - System Shuts Down A Few Times And Reboots

Oct 2, 2015

Every time I try to unplug my laptop I get an error message that say Thread in Device Manager" and the system shuts down a few times and reboots. I can never unplug my laptop with out this happening. 

View 5 Replies

Drivers/Hardware :: Keyboard / Touchpad Stop Working Randomly?

Jan 12, 2016

This has happened a lot since my upgrade to Windows 10, and it's really starting to get on my nerves. Seemingly randomly, my keyboard will stop responding to what I type, and my touchpad completely stops as well (no, I did not accidentally click to disable it). These problems will never resolve themselves on their own, but as soon as I reset the computer everything works again - to me, that sounded like a driver crash, but nope! I checked the driver menu and it told me everything was running just fine. What's even more strange is that I have the backlight keyboard enabled so that when I type, it lights up. And strangely, the keys still light up when I press them, so I know it's registering my typing SOME how.

You would also think that this would be a software problem since it fixes immediately upon reset, but I've noticed that this issue seems to crop up a lot right after I have moved my computer..

In order to possibly do testing on what is causing this (I've tried everything I can think of) I am purposely not resetting my computer (this is a touch screen, but this on-screen keyboard typing is obnoxious). Currently, both keyboard and touchpad don't work, but a usb mouse I use does (the computer is also set so that using the usb mouse does not disable the touchpad).

View 4 Replies

Drivers/Hardware :: Not Detecting 2nd Monitor?

Dec 11, 2015

I have a dual monitor setup. I have 2 AOC e2252V monitors that would work fine on Windows 7. I have all updated drivers. I've checked the internet for multiple solutions but everyone's problem seemed to be that they didnt extend their displays. My problem is that both windows 10 and my graphics card are not detecting it. They are both connected to the DVI-D connections on my MSI R9 390 graphics card (installed with the latest drivers from 11/30/2015 on the MSI website.) One monitor is hooked up from VGA through a DVI-D adapter to connect to my graphics card. I assumed this wasn't the problem because I did the same thing on my previous card where it worked just fine. I checked to see if one of my DVI-D connections were faulty on the card, but my one monitor hooked up directly through a DVI-D cable (no adapter) works on both of them. If I hook up my TV through HDMI connection, it will detect my TV. I wonder if this is a problem with Windows 10, MSI R9 390, or the adapter. [URL]

View 4 Replies

Drivers :: Doesn't Recognize Monitor

Feb 13, 2016

I'm having trouble to get picture on my main and only monitor when booting up. The green led indicator on the monitor is just flashing.

Usually I have to push the restart button 10-15 times until picture finally appears. Sometime I am able to log on in the dark. Hit space and logon, then do a win+p until picture appears.

I've tried to uninstall the drivers, but that didn't solve it. I had to use a different monitor to get in for the first time after that. Driver is the most recent one.

View 2 Replies

Drivers/Hardware :: New Monitor No Sound From HDMI

Dec 25, 2015

Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.

Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.

View 9 Replies

Drivers/Hardware :: Color Tuning On AOC Monitor

Oct 17, 2015

I'm trying to tune a new AOC monitor, model E2250Swdn, as when plugged into my laptop I noticed that my taskbar on the new monitor appears to have less blue to it than is presented in the attached image below. looking at the screenshot here that I took on my laptop's screen of my taskbar, what adjustments I need to make to the monitor? is it color correction, gamma or brightness?

View 1 Replies

Drivers/Hardware :: Monitor Will Not Sleep On Shutdown

Jan 8, 2016

I just changed from DVI to HDMI and now when I shutdown my computer my monitor will not enter sleep mode, and will display 'Cable Not Connected' as shown in the image attached.

View 2 Replies

Drivers/Hardware :: Have No Sound On Monitor Speakers

Oct 15, 2015

After installing Windows 10,for some reason I have no sound on my monitor speakers.I upgraded from Windows 7 where there were no problems.When I open Device Manager/ Audio inputs and outputs.click on speakers it says "this device is working properly".On trying the Test button it lights up Green but still no sound.

View 3 Replies

Drivers/Hardware :: Failed To Add Port Monitor HP

Oct 24, 2015

Bought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.

View 9 Replies

Drivers/Hardware :: Touchscreen Only Works When It Is Main Monitor?

Aug 16, 2015

I have a two monitor set up, with my main monitor being a 27" screen and a second 22" touchscreen as a secondary monitor.

I can only get the touchscreen monitor to pick up touches if I make it my main monitor. As soon as I switch my main monitor back to my 27" monitor touches to the touchscreen monitor appear on 27" monitor.

View 3 Replies

Drivers/Hardware :: Can't Adjust Brightness Or Connect To A Monitor

Aug 18, 2015

just updated to windows ten with my Sony Vaio 14 touchscreen laptop. 2 things ive noticed so far that have been bugging me is 1. I cannot adjust my brightness with the f5 & f6 keys like i could before... nor do i know how to changed the brightness now at all. Also if not able to connect to an external display (i.e. monitor or TV) used to do it automatically with 8 now nothing.

View 1 Replies

Drivers/Hardware :: Re-assign Monitor Identities / Numbers?

Aug 11, 2015

No matter what I do Windows always labels my secondary TV screen as my PC screen and vice versa. It's not really a problem in terms of functionality but it does annoy me that I can't change it. I've been through countless televisions and GPU's over the years but it always remains so possibly there is a good reason for it?

Anyway, the 'issue' has been persistent since W7 (and possibly before?) but I'm wondering if there is now/or always has been a work around for this?

Edit: This post explains it better Changing monitor identities?

View 9 Replies

Drivers/Hardware :: Driver For Samsung SD590C HD Monitor?

Jan 26, 2016

I've just bought a fancy new curved screen HD Samsung monitor, but can't get it to work with my Windows 10 PC. Samsung tell me that they haven't released a Windows 10 driver yet, but that it should work with the basic Windows 10 driver. It doesn't.

View 4 Replies

Graphic Cards :: Dual Monitor Setup Locks 144Hz Monitor At 60Hz

Nov 22, 2015

I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.

The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.

Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.

View 9 Replies

Graphic Cards :: Changed Monitor Resolution Now Monitor Says Input Not Supported?

Nov 27, 2015

I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.

I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.

View 6 Replies

Chrome Blurry On Second Monitor After Display Scaling On Main Monitor

Aug 10, 2015

So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.

Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.

View 1 Replies

Laptop Monitor Won't Work - Go To Graphic Setting But It Only See External Monitor

Aug 14, 2015

I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.

View 1 Replies

Drivers/Hardware :: Default Network Printer Randomly Defaults To Adobe PDF Printer

Jan 26, 2016

The issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.

Steps taken:

* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this.
* Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.

View 5 Replies

Main Monitor Only Works When A Second Monitor Is Plugged In?

Sep 23, 2015

I am running Windows 10

MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort

So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.

View 1 Replies

PC Reboots Itself

Aug 17, 2015

Ever since I've upgraded to Windows 10, my computer randomly reboots (from hibernation mode). Once it was exactly at 3:00 AM, the other were random times. The spookiest of all times was when it randomly booted, I shut it down, and then it booted again five minutes later - two times in a row. I took a look into the Event Viewer, and the first events are as follows (I have to freely translate as I haven't been able to make my German Windows display the events in English):

- System time was synchronized with the hardware clock
- The firmware has sent start metrics
- In this system there are 0x1 start options
- The start manager waited 0ms for a user input
- The guideline for the start menu is "0xFEC00000"
- The start type was "0x2"
- The system got reactivated from standby. ... [some timestamps] ... Reactivation source: unknown

This has happened more than once (although I can't say for sure that this was always the reason for the unprompted reboot).

I know there are some options to prevent Windows from rebooting, but firstly I'd like to establish the causes as I'm kind of unsettled right now....

View 4 Replies

PC Reboots While Its Booting Up

Jun 6, 2015

My Windows 10 installation does not boot anymore, the PC reboots while it's booting up. I have tried every advanced options available (safe mode, low resolution video...) to no avail. I tried enabling the bootlog but I cannot find the log file when I eventually browse the disk from my windows 7 OS.

I'd like to restore the installation rather than reinstalling it. The build was not the very last one but the preceding one, so not so old.

View 1 Replies

PC Reboots Once After First Startup Every Day

Oct 6, 2015

Once every day after first start up my pc decides to reboot, and it seems to be quite random at which time it reboots. Can be just when I enter windows or after 20 minutes. Then the power goes back on for a sec and it tries to start but then in an instant reboots again and then it runs fine for the rest of the day. I have not done extensive testing on different components and since I dont get a BSOD I dont really know where to start and since it only happens once a day I can only test one solution every day   .

View 1 Replies

Why Does HP Envy 14 Do Frequent Reboots

Sep 15, 2015

I suspect some kind of driver conflict, maybe.... but why the machine randomly reboots....haven't lost any work yet but just a matter of time.

View -1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved