Drivers/Hardware :: This Device Cannot Start (Code 10) High Definition Audio Controller
Sep 2, 2015
Macbook pro early 2011 bootcamp was not willing to let the SSD run in AHCI mode in windows 10, so I did EFI installation of windows 10. Everything seems to work but the audio card.
Code: This device cannot start. (Code 10) in the High definition audio controller.
I tried installing the drivers manually and automatically and from the bootcamp but this error persists.
Is the problem in the EFI implementation of the macbook pro early 2011 that windows cannot read , or is it related to drivers ? I downloaded latest videocard Intel HD 3000, and realtek generic driver. The audio drivers seems to be from currus logic.
On Bootcamp install (BIOS) the sound card works fine, but in EFI it can not start the driver.
View 1 Replies
Similar Messages:
Aug 4, 2015
I have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.
This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.
I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?
[URL] ....
View 1 Replies
Feb 26, 2016
I installed Windows 10 and I have no sound. When I looked in devise manager it said High Def Audio devise was updated.
View 1 Replies
Sep 12, 2015
i have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
View 4 Replies
Feb 10, 2016
i ran latencymon and did a trace, but am unsure how to procede
View 1 Replies
Aug 22, 2015
Every time I reboot it seems I lose my audio on my sound blaster x-fi titanium pci express sound card. Also; it seems like every time I turn my audio controller off for awhile then back on; i get at high pitched hum sound and then when i try and play something I get crackling audio. What the heck is up with windows 10 and these issues? Ive never had these problems with my sound card under windows 7.
View 2 Replies
Mar 2, 2016
While trying to plug in a VGA cable, I accidentally turned off my power strip, which cut the power to my computer. When I turned it and my computer back on, I was unable to connect to the internet via Ethernet cable.
I went to device manager and under network adapter, it said "This device cannot start, code 10." I've tried reinstalling it, both automatically and manually from a CD and USB. I've done almost everything I can think of to fix this. I scanned and fix any errors on my hard disk, I've reinstalled all my USB drivers, I've power-cycled my router, I've tried different Ethernet cords, and I've tried to delete any corrupted files in my registry, but that must either not be a thing on Windows 10, or I am doing something wrong.
OS: Windows 10
Processor: Intel i7
Motherboard: Asus
View 1 Replies
Sep 27, 2015
Since upgrading from Windows 7, I have not been able to find an easy way to switch between audio devices easily on Windows 10. What I'm trying to do is switch between my system speakers and headphones. The only way I can find to do this is to right-click the speakers icon in the taskbar, select playback devices, right-click either "speakers" or "headphones" and select "Set As Default Device."
From then on, all sounds are routed to that device. But I have to do this every time I want to switch between headphones and speakers. I think on Windows 7 there was a way to route all sounds through BOTH speakers AND headphones. I could then just use the physical device's switches to control where the sound comes from. I haven't found a way to do this on Windows 10.
View 4 Replies
Dec 31, 2015
Just bought a new HP Pavilion x2 (laptop/tablet hybrid) and it has been working perfectly for about a week. Suddenly went to start it up and it had done some updates which has left me with no audio. When I open up the Sound through search, under the Playback tab there is only "No Audio Devices are Installed" (with both Show Disabled and Disconnected Devices ticked).
I have gone through device manager and under Sound, Video and game controllers there is only: "Conexant I2S Audio Codec" as a driver. I have uninstalled this, reinstalled it, updated driver software (from my computer and internet), disabled it, added legacy hardware and tried a varied combination of these from various forums and guides and nothing has worked. There is still a little red x next to my volume control. My speakers are B&O (says so on the side of the screen).
View 6 Replies
Nov 3, 2015
So, i have Windows 10, i'm barley learning about Computer's and such, but i plugged in my headphones and then all of a sudden i see "No Audio Output Device is Installed." I unplugged my headphones to see if that would fix the problem but of course it didn't. I don't know what to do i tried doing something else where i had to change my files to classic but i didn't see any General tab.
View 4 Replies
Aug 7, 2015
I have upgraded my laptop Asus k43s from windows 7 to windows 10. Everything went fine but then I decided to reset the laptop to have a fresh start. After resetting, my sound button has a red x mark on it saying that "No audio output device is installed". So I go to the device manager to check things out and it says that the drivers are functioning well. I have 4 Nvidia high definition audio and 1 realtek high definition audio(don't know why so many). I tried to disable and enable but no luck. I also tried to do a reset again to check if something went wrong on my first reset but still after the 2nd reset I still get the same problem.
View 7 Replies
Mar 5, 2016
Following a necessary reset of Win 10 I have no audio at all. When going to IDT High Definition Audio codec in device Manager and initialising reinstall Driver, the driver is found but installation has failed because "a device attached to the system is not functioning". What device?
View 4 Replies
Aug 17, 2015
I recently reset my windows 10 then I got problem my laptop can't produce sound so I can't hear sound from it the speaker logo in the task bar have x mark and when clicked it opens troubleshooter then windows can't find the trouble. I also uninstall and reinstall my audio driver, Realtek High Definition Audio and NVIDIA High Definition Audio, but nothing change this is frustrated me I need sound to play games, watching films, and watching youtube, so anyway I need sound to make my life harmony. One thing the screenshot (Windows+Prt Sc) also won't save the picture only dimming few second then I couldn't find the pictures.
View 3 Replies
Nov 15, 2015
I have my PS4 and Xbox One connected to my second screen with HDMI and from my screen I have 3,5 audio cable from screen audio output to motherboards soundcards line-in and in windows I listen to line-in device.
It works when i activate option "listen to this device" in control panel until I restart computer.
If I have option "listen to this device" checked when I restart it won't work until I uncheck that option and restart again or restart audio services.
I have two soundcards one on motherboard (Realtek) and Creative Soundblaster Z and sound output seems to work because I can listen to music and watch videos but I can't hear anything from line-in.
I have installed new drivers and clean install on windows 10.
View 1 Replies
Oct 10, 2015
I just bought a Sades SA 901 and am trying to install it. Software will not install because device is not properly recognized and does not request a driver install when plugged into any usb port.
View 3 Replies
Feb 18, 2016
-Intel® Ethernet Controller I210-AS
Msi x99a sli krait edition (flashed n2.0 to n4.0)
Windows 10 64 home edition
System is only a year old.
Flashed bios for updated memory compatibility.
Directly after all works except Internet.
Network controller is now missing (no "other devices", or exclamation point next to device.)
A month ago the wifi card had to be removed to free up pci lanes for an m.2 nvme, so I have no alternative method for Internet access.
Windows sees absolutely no networks or adapters.
Ethernet port is not blinking.
Mobo utility driver disc doesn't see a device to install drivers for.
View 1 Replies
Aug 19, 2015
My laptop does not want to recognise the sound card/audio driver that are built into it. The fun part is this just happened. Audio played yesterday, and the time before that, and even before the upgrade. The only thing that has changed (or at least is the biggest change i can think of) is downloading and installing Cygwin (sans audio packages). In trying to play a song on the new microsoft Groove, i get this;
Further inspection in the playback devices, the only two options are the Speakers/Headphones and communications Headphones, the former of which i can only assume is my actual computer speakers (otherwise its completely gone!).Looking at the device manager, everything seems okay. All the drivers are up to date so im not sure what could be wrong there?
Its Windows 10 pro (upgraded from Win7 Pro) and the computer is a Dell Precision M4600. (I am pretty sure the audio driver is in the device manager image).
View 1 Replies
Oct 5, 2015
I have an ASUS e56u laptop that I updated from Windows 7 to 10. Since the update the -Intel(R) Centrino(R) Wifi N-6150- driver is not starting up. It is the newest version (ver15.12.0.9).
View 2 Replies
Oct 2, 2015
Laptop Samsung NP300V5A. Sound stops working about a month after Win 10 upgrade. No changes done at the time.Audio devices show up under Device Manager, but not under Playback/Recording Devices. Same for Realtek Sound Manager - it doesn't see the devices. I can install, delete and update drivers under Device manager but it doesn't make any difference. It is not a physical problem, tested on Linux live CD.
Solutions tried:
-Installing various versions of HD Realtek Drivers (including windows update version)
-Installing/Removing Realtek software.
-Enabling/Disabling devices under Device Manager
-Called spirits of ancestors. Seemed like it worked for a while, but ended up being a joke.
-Did system restore to various dates.
-Restarted in safe mode
-Restarted various services such as Windows Audio, Windows Audio Endpoint Builder, Plug'n'Pray, Power, etc.
-Checked system, application and driver even logs.
-Tried a couple of registry fixes. Angered spirits of ancestors. Turning gray..
-Reinstalled chipset drivers
-Rebooted about 30 times
-Sound Device Troubleshooting finds no issues
-Display Disabled Devices is enabled
View 1 Replies
Aug 5, 2015
I am using windows 10 on an asus g750 laptop, with realtek audio manager. I use headphones and have to keep my volume levels around 4-10. Otherwise they are to loud and hurt my ears. At roughly 20 you can hear the audio clearly from 6 inches to a foot away. Is there any way to re-balance my audio? or set a new maximum? or should i try to uninstall realtek?
View 1 Replies
Oct 10, 2015
I connected an audio cable to my laptop but when windows asked what the cable was i accidentally checked the box that said microphone. Now i can't change it anymore and my audio device is in the recording tab instead of the playback tab. How do i change this?
View 1 Replies
Dec 25, 2015
I have been having a problem with the USB 3.0 ports on my computer.
This computer is a Windows 10 64-bit machine that I built in November. It has an Asus P9X79 LE motherboard, and an Intel i-7 4820 CPU.
A few days ago, I noticed that two external drives attached to the two rear USB 3.0 connections were not showing up among the listed drives. This MB also has a USB 3.0 header, to which I have connected four USB 3.0 ports on the front of the case. I found that my drives, and other USB devices, were recognized and worked fine when plugged into the front ports, but not when plugged into the back.
The first thing I did was check the USB section of the Device Manager. The USB 3.0 controller was listed, and there were no warnings (yellow ! icons) to indicate any problems. Since then, I have tried the following:
First, I searched for hardware changes in the Device Manager. It found nothing.
Second, I deleted the USB 3.0 controller and rebooted to get the system to reinstall the device. It did reinstall the device, but this accomplished nothing.
Third, I updated the BIOS to the latest version on the Asus website. I verified with ASUS that this was indeed the most current version. No change.
Fourth, I updated all chipset drivers for the MB, with the current files on the Asus website. No change.
Then, a couple of days later, the front USB ports stopped working. Checking the Device Manager, the USB 3.0 controller is now missing. Checking online, I found a suggestion that USB 3.0 might be disabled in the BIOS, so..
Fifth, I checked the BIOS settings, and found no way to enable or disable USB 3.0.
One thing that is very odd about this, which the Asus tech commented on, was that the front ports were working while the back ones were not, since they rely on the same controller.
Second, if I were to purchase a PCI-e USB 3.0 board, would it have its own controller, so I won't have to rely on the Asus MB for this functionality?
View 8 Replies
Feb 10, 2016
What is a Pci encryption/decryption controller? I have a yellow exclamation in device manager. Where do I download the driver?
View 3 Replies
Feb 10, 2016
I installed Windows 10 for the first time a few hours ago. I like the new interface, etc, but I have a few problems:
Xbox One wired controller doesn't work. Windows 10 automatically install a driver for it, but it still doesn't work. I tried some solutions like this, but without success. I haven't that Microsoft Xbox One Controller entry he wrote about.
Xbox controller works fine with another PC. And these USB ports as well, works fine with other devices.
View 1 Replies
Nov 5, 2015
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
View 2 Replies
Nov 7, 2015
All of a sudden my XBOX 360 controller has stopped working on my desktop. I will connect it to a port it will blink 2-3 times and then it won't show up on device manager or anywhere. It was working just a few days back. I purchased Project Cars and now am panicked since I don't have money for a wheel and can't drive with keyboard. I thought maybe it was the controller itself, but it works fine on laptop-lights up in middle and can use it with emulator. Here is my desktop specs.
GB z77x-d3h mb 3770k at 4.3
GTX 960 2 GB Windows 10 pro 64 bit with latest build
16 GB RAM,
Here is what I have done so far. Tried multiple USB ports on back of computer. No luck. Does same thing with all of them Tried to use device manager and scan for hardware changes-no luck there. Tried downloading XBox 360 controller accessories from MS. No luck there
View 1 Replies
