I have a two monitor set up, with my main monitor being a 27" screen and a second 22" touchscreen as a secondary monitor.
I can only get the touchscreen monitor to pick up touches if I make it my main monitor. As soon as I switch my main monitor back to my 27" monitor touches to the touchscreen monitor appear on 27" monitor.
I am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
I have my TV connected to HDMI and a small, old monitor connected to VGA on a Radeon 4600 video card. I have Kodi (multimedia player) set to open full screen when the default user account logs in and it does so on the main monitor which is my TV. I have the smaller, older monitor set up so I can still use the computer when someone is watching a movie on the TV. I have multi-monitor set to extend the desktop.
But my problem is when I open a program it wants to default to opening on the main monitor and when I open a program from the second monitor, it opens behind Kodi on the main monitor (and I have to click and drag it over to the second monitor) - so I would like to switch the old VGA monitor to be the main monitor and the TV to be the second.
Is there a way I can force Kodi to open and stay on the second monitor once I make my TV the second monitor?
I have a acer Z5600 and use an acer AL1916W as an additional monitor which worked fine with Windows 7, since I upgraded to windows 10 my second monitor does not work and my main screen just goes black.
View 3 RepliesToday I upgraded to windows 10, and the first thing I noticed was that the display on my main monitor was out of bounds(1920x1080 btw). I know the task-bar and icons on the desktop are there, but they aren't in the frame of the monitor. My other display is flawless, but the main one isn't. I turned down the refresh rate from 60 to 30 on the main monitor, and that let me see everything on my desktop, however, there is a flicker when I go over stuff. Also, I feel that there is somewhat of an input lag with the mouse.
View 1 RepliesI just bought a HP Stream x360 yesterday and upgraded it to Windows 10, the issue is that the touchscreen will no longer work. It worked with 8.1 but not with 10. I have checked with Windows Update and installed all of the updates. I have also checked with the HP driver support to see if any needed to be installed and it said none (if I did it right).
View 9 RepliesWindows 7 HP Pavilion DV7 w/ second monitor attached via RGB.Windows 10 upgrade wizard said everything was fine.Upgrade took >90 minutes. Second monitor no longer works on my laptop. (No monitor works - tried different cables, different monitors.)Contacted Samsung for support on monitor. Downloaded updated video driver.Rebooted.Windows 10 now won't boot. No system recovery options.
View 1 RepliesIn win7 and win8.1, i could set the screen of my tablet (Lenovo Miix3) to switch off after 3 min (not sleep, just switch off the screen). Tapping the touchscreen would bring it immediately to life again.
With win10, this does not happen. I need to click the on/off button to bring up the screen. So, it seems that Win10 switches off the touchscreen electronics. This is not a hardware issue, because previous Windows versions would let me switch off the touchscreen backlight but retain its sensitivity to touch (and therefore switching on upon tapping).
What do I need to do to restore the standard behavior (tappable touchscreen after switchoff) in Win10?
Last time my wifi didnt work and eventually nothing, but I managed to do a clean install. Thereafter, with ASUSUTeK, I downloaded some drivers to bring back my internet.
So now I have internet and a fresh clean install, but my touchscreen(and sound too, but I want to focus on touchscreen first) wont work anymore at all. Also, the buttons like f5/f6 dont work anymore either
Things I already tried:
- Calibrating
- Looking in the Device Manager to update drivers.
The problem is, most websites say that I have to turn the ''HID compliant screen'' on and off, but I dont have that driver/thing at all in my device manager. I also cant find a download link on ASUS' drivers website to fix this.
I can tap the screen and operate scroll bars but cannot change pages or scroll by simply flicking. This seemed to begin after an update called eGalax USB touchscreen. I can't find it and the normal HID USB touchscreen device is not in my device manager, it is however in hidden devices and greyed out.
View 1 RepliesIt worked fine in windows 7 but now when I choose "duplicate display" from the side menu popup the tv goes blank as if Ive unplugged the hdmi. All 3 of the remaining display options work including the extend display and tv only setting so its not a cable issue. Laptop model is XPS 17 L702X. Now when I used to do it in win 7 sometimes it wouldnt autodetect it so I would have to right click desktop, open invidia up and click rigorous display detect or something like that and then laptop screen would blink and make the beep noise like when hdmi cable got connected. Now in the invida panel it just simply wont allow mirroring, nothing happens when I right click on the display box that would normally show 1 and a smaller box would say 2. I dont get it but Id really like that feature back If its something simple I could do.
View 1 RepliesI recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
When the print spooler is turned on I get a message that says the printer queue is full. (The printer queue is empty.)
If I try the printer without the printer spool on i.e. print directly to the printer, I get a message that says "Unable to create a print job."
This printer was working with Win 10 until recently. The scan function works as it should. So the computer does see and interacts with the printer through the usb port.
Something must have changed in the latest Windows 10 release to gum up the works.
I updated to the latest drivers for Intel AVStream Camera on my tablet / laptop. After the update, only the front camera works now.
View 1 RepliesI have a large tablet, but im struggling taking screenshots from my touchscreen, the win button plus down volume doesn't appear to work ?
View 2 RepliesI recently built this computer and had win 7 installed. I upgraded to win 10 and I also have a touch screen monitor, how do I enable touch screen on my computer?
View 1 RepliesI updated my computer (Asus X553MA) to windows 10 a few days after the release became available for my computer. Up until the upgrade from windows 8.1 update, I was having no problems with my touchscreen whatsoever. But once I upgraded, my touchscreen and touch pad functionality ceased to work. I went to the I installed all the windows updates (not like I really had much of a choice to begin with), and installed all of the updates available for windows 10 from the Asus webpage. I managed to regain all of my multigesture touch pad functionality, but my touchscreen still ceases to work.
I saw in one of the other forums that going through the device manager and modifying some settings, you are able to get your touchscreen to work, but the setting that needs to be modified, is not available on my computer. I have also restored my computer to a point after the upgrade to windows 10 to where I knew my touchscreen was working, but I've had no luck.
I have a dual monitor setup. I have 2 AOC e2252V monitors that would work fine on Windows 7. I have all updated drivers. I've checked the internet for multiple solutions but everyone's problem seemed to be that they didnt extend their displays. My problem is that both windows 10 and my graphics card are not detecting it. They are both connected to the DVI-D connections on my MSI R9 390 graphics card (installed with the latest drivers from 11/30/2015 on the MSI website.) One monitor is hooked up from VGA through a DVI-D adapter to connect to my graphics card. I assumed this wasn't the problem because I did the same thing on my previous card where it worked just fine. I checked to see if one of my DVI-D connections were faulty on the card, but my one monitor hooked up directly through a DVI-D cable (no adapter) works on both of them. If I hook up my TV through HDMI connection, it will detect my TV. I wonder if this is a problem with Windows 10, MSI R9 390, or the adapter. [URL]
View 4 RepliesI'm having trouble to get picture on my main and only monitor when booting up. The green led indicator on the monitor is just flashing.
Usually I have to push the restart button 10-15 times until picture finally appears. Sometime I am able to log on in the dark. Hit space and logon, then do a win+p until picture appears.
I've tried to uninstall the drivers, but that didn't solve it. I had to use a different monitor to get in for the first time after that. Driver is the most recent one.
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.
for a month or so I have a samsung tv-monitor (27 TV monitor with the blue Touch of Colour (Black) (LT27D390EW/XU) | Support | SAMSUNG UK ) . Problem is that sometimes (rarely tbh -like once a day) the monitor reboots itself (the screen for 1 sec turns black in my next sec throws the Samsung logo and then it comes back to where it was before.
The monitor is connected to hdmi cable at 1080p resolution and I also have and an internal S / PDIF cable to get the sound passing from the motherboard to the gpu.
I sent the monitor to Samsung where they told me that this is a software problem that comes with windows 10 and that as far as they are concerned there is no solution to this other than reverting to windows 7. I had already installed windows 10.I have already tried installing the drivers that Samsung have on their site but it wont fix the problem.
I'm trying to tune a new AOC monitor, model E2250Swdn, as when plugged into my laptop I noticed that my taskbar on the new monitor appears to have less blue to it than is presented in the attached image below. looking at the screenshot here that I took on my laptop's screen of my taskbar, what adjustments I need to make to the monitor? is it color correction, gamma or brightness?
View 1 RepliesI just changed from DVI to HDMI and now when I shutdown my computer my monitor will not enter sleep mode, and will display 'Cable Not Connected' as shown in the image attached.
View 2 RepliesAfter installing Windows 10,for some reason I have no sound on my monitor speakers.I upgraded from Windows 7 where there were no problems.When I open Device Manager/ Audio inputs and outputs.click on speakers it says "this device is working properly".On trying the Test button it lights up Green but still no sound.
View 3 RepliesBought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.
View 9 Replies