Drivers/Hardware :: UBS2 And UBS3 Host Controller Code48 After First Reboot
Jul 30, 2015
Okay, I upgraded from Windows 7 64Bit to windows 10 Home 64bit.
Everything ran smooth and fine. I first get into windows (after the "Hi" screen and setting up apps screen) and I see my desktop. I install the latest video drivers first thing. I go to reboot and when It boots back into windows.
NONE of my USB devices are working at all. I had to use splashtop (remote desktop service) to connect to my windows 10 PC to be able to control it at all. Come to find out.
ASmedia USB 3.0 eXtensible Host Controller (3 of the listed)
and
Intel C600/X79 series Chipset USB2 Enhanced Controller #1 (and #2)
all had exclamation points in front of them.
I click on them and it is giving me a code 48
which is windows is blocking the driver from starting because it has known issues with windows.
NOW it was working FINE until I rebooted the computer. It has done this TWO times.
I try to update the driver.. it says I have the best driver installed.
I try to manually update the driver using C:/windows as the place to look.. it says I have best driver installed.
I try to uninstall the driver and let windows install it again... same results as above.. it just gets the exclamation mark again immediately.
I tried uninstalling, rebooting.. same results.
I tried looking on Asus's website for USB drivers for windows 10. They have NO USB drivers for windows 10 at all listed under my board. (Asus Rampage IV Formula)
Is there anyway to stop windows from blocking the driver? I also tried checking intel's website for USB drivers for windows 10.. nothing.
Also I tried installing the Intel Chipset Software that is listed on this site, though for some reason it won't let me install it. It keeps asking for SetupChipsetx64.msi, and keeps looking in a folder in which it doesn't exist.. and the .msi is not in the folder that you extract from the download either.
How are manufacturers this unprepared for a OS launch?
View 9 Replies
Similar Messages:
Dec 25, 2015
I have been having a problem with the USB 3.0 ports on my computer.
This computer is a Windows 10 64-bit machine that I built in November. It has an Asus P9X79 LE motherboard, and an Intel i-7 4820 CPU.
A few days ago, I noticed that two external drives attached to the two rear USB 3.0 connections were not showing up among the listed drives. This MB also has a USB 3.0 header, to which I have connected four USB 3.0 ports on the front of the case. I found that my drives, and other USB devices, were recognized and worked fine when plugged into the front ports, but not when plugged into the back.
The first thing I did was check the USB section of the Device Manager. The USB 3.0 controller was listed, and there were no warnings (yellow ! icons) to indicate any problems. Since then, I have tried the following:
First, I searched for hardware changes in the Device Manager. It found nothing.
Second, I deleted the USB 3.0 controller and rebooted to get the system to reinstall the device. It did reinstall the device, but this accomplished nothing.
Third, I updated the BIOS to the latest version on the Asus website. I verified with ASUS that this was indeed the most current version. No change.
Fourth, I updated all chipset drivers for the MB, with the current files on the Asus website. No change.
Then, a couple of days later, the front USB ports stopped working. Checking the Device Manager, the USB 3.0 controller is now missing. Checking online, I found a suggestion that USB 3.0 might be disabled in the BIOS, so..
Fifth, I checked the BIOS settings, and found no way to enable or disable USB 3.0.
One thing that is very odd about this, which the Asus tech commented on, was that the front ports were working while the back ones were not, since they rely on the same controller.
Second, if I were to purchase a PCI-e USB 3.0 board, would it have its own controller, so I won't have to rely on the Asus MB for this functionality?
View 8 Replies
Feb 10, 2016
What is a Pci encryption/decryption controller? I have a yellow exclamation in device manager. Where do I download the driver?
View 3 Replies
Feb 10, 2016
I installed Windows 10 for the first time a few hours ago. I like the new interface, etc, but I have a few problems:
Xbox One wired controller doesn't work. Windows 10 automatically install a driver for it, but it still doesn't work. I tried some solutions like this, but without success. I haven't that Microsoft Xbox One Controller entry he wrote about.
Xbox controller works fine with another PC. And these USB ports as well, works fine with other devices.
View 1 Replies
Nov 5, 2015
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
View 2 Replies
Nov 7, 2015
All of a sudden my XBOX 360 controller has stopped working on my desktop. I will connect it to a port it will blink 2-3 times and then it won't show up on device manager or anywhere. It was working just a few days back. I purchased Project Cars and now am panicked since I don't have money for a wheel and can't drive with keyboard. I thought maybe it was the controller itself, but it works fine on laptop-lights up in middle and can use it with emulator. Here is my desktop specs.
GB z77x-d3h mb 3770k at 4.3
GTX 960 2 GB Windows 10 pro 64 bit with latest build
16 GB RAM,
Here is what I have done so far. Tried multiple USB ports on back of computer. No luck. Does same thing with all of them Tried to use device manager and scan for hardware changes-no luck there. Tried downloading XBox 360 controller accessories from MS. No luck there
View 1 Replies
Sep 2, 2015
Macbook pro early 2011 bootcamp was not willing to let the SSD run in AHCI mode in windows 10, so I did EFI installation of windows 10. Everything seems to work but the audio card.
Code: This device cannot start. (Code 10) in the High definition audio controller.
I tried installing the drivers manually and automatically and from the bootcamp but this error persists.
Is the problem in the EFI implementation of the macbook pro early 2011 that windows cannot read , or is it related to drivers ? I downloaded latest videocard Intel HD 3000, and realtek generic driver. The audio drivers seems to be from currus logic.
On Bootcamp install (BIOS) the sound card works fine, but in EFI it can not start the driver.
View 1 Replies
Aug 19, 2015
Just as the titles states; why is it that every time I reboot with windows 10; it wipes out my sound? This once again is on a sound blaster x-fi titanium pci express sound card.
View 1 Replies
Jan 30, 2016
I am running Windows 10 on my Lenovo Flex 3 15.
My problem seems a little complicated so I'll go step by step what happens:
1. I plug in a USB device to use it (like a flash drive or a printer)
2. Windows makes the "device recognized" sound
3. Nothing happens, so I go to device manager to see if the device is actually working. It's listed under "other devices" and it says "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device."
4. I reboot my computer WITH THE USB DEVICE PLUGGED IN and all of a sudden and without explanation the device manager recognizes the device and its driver and I can use.
5. I unplug the device and plug it back in and it goes back to step 2.
6. Also, when I click "update drivers" it cannot find them automatically and when I search for the driver manually it just gives me an error saying it did not install successfully.
This is such a frustrating problem because it means I have to reboot every time I need to use a printer or a flash drive. I also have tried everything I can think of: uninstalling every last trace of the driver and trying to let it install freshly on its own; checking the status of Plug and Play; etc.
View 1 Replies
Aug 18, 2015
Since upgrading to win 10, I am having problems with sound not being permanent. Don't quite know how to approach it. This is VIA HD audio on an ECS motherboard. The icon on the taskbar shows that sound is on, and at 75%. But when I test it, there is no sound coming through the speakers. So I uninstall the driver, I scan for hardware changes; it reinstalls itself. Then I check the configuration, it's set to headphones as default. I change it to speakers, test the sound, and it works. Now when I restart my system for some reason, the sound is gone again, and I need to go through the same routine. I have downloaded the specific driver for VIA HD (they only have a driver for Win 8), installed it, and it doesn't work at reboot. make my driver more permanent, so that it's not lost at reboot?
View 2 Replies
Aug 1, 2015
I'm using HP 15-n061sr with Windows 10 SL and SSD Plextor PX-128M6Pro.
Right after the upgrade from Windows 8.1, I started to experience SMART error on reboot, and only on reboot. I mean that if I just turn the laptop off and on it doesn't happen. It says that SMART detected a possible imminent failure of my disk. If I press "Continue startup", it says something like "insert boot device" or that it can't detect an operating system. Then I can go to BIOS options and restart from there - it boots up flawlessly. This happens every time I reboot. I upgraded 2 days ago. I have the latest SSD drivers. I used Windows' disk optimization tool. SSDLife Pro says disk health is fine.
P.S. I once had imminent failure problem with my previous SSD, but it happened once and it never started again; I got the refund under warranty.
View 9 Replies
Nov 15, 2015
I have my PS4 and Xbox One connected to my second screen with HDMI and from my screen I have 3,5 audio cable from screen audio output to motherboards soundcards line-in and in windows I listen to line-in device.
It works when i activate option "listen to this device" in control panel until I restart computer.
If I have option "listen to this device" checked when I restart it won't work until I uncheck that option and restart again or restart audio services.
I have two soundcards one on motherboard (Realtek) and Creative Soundblaster Z and sound output seems to work because I can listen to music and watch videos but I can't hear anything from line-in.
I have installed new drivers and clean install on windows 10.
View 1 Replies
Nov 7, 2015
Want to reset my Host File as part of trying to solve a problem Internet Explorer.
Can I use a 'FixIt50267' used for Win 7 after creating a 'old' file of the current Hosts.
View 4 Replies
Dec 5, 2015
I don't really play games and recently started playing Halo on my PC. (running win10 on my mbp). Looking to get a xbox controller for PC.
Is there a different between Xbox One and Xbox 360 controllers for PC?
View 1 Replies
Jan 14, 2016
One drive is disabled, No store and no Microsoft account on this desktop. At shut down this event error will be reported "Sync Host 386de service terminated unexpectedly....corrective action in 10000mlsec ..restart the service
Searching the registry results in that there is no 386de sync host service , There are others in the registry but not this recent 386de
In the past I did edit the START to be 4 (suggested in this forum general discussion on similar sync host errors) . The setting was returned to 2 when no change was observed.
This error tends to appear when external drives remain plugged in. Since the Nov. upgrade if externals are left in a usb3 port the system restarts. I now unplug but last night after recent Jan updates I tested by leaving in 1 Usb3 external.
View 2 Replies
Dec 27, 2015
After using W10 for a few weeks I'm suddenly getting a message when trying to Power Off:
Task Host Windows is stopping background tasks (Microsoft Windowsdevice directory client register userdevice)....
View 1 Replies
Sep 16, 2015
I recently upgraded to Win 10 and since when I want to shut down the desktop there is this thing running "task host windows" which I have to force shut it down.
View 3 Replies
Oct 13, 2015
I have found that my CPU usage is running at 30%, due to Service Host: Local System (15). I have the list of the 15 processes, but how do I find which one is using all the power.
View 1 Replies
Sep 18, 2015
I bought an XBOX One controller with cable for Windows from Amazon. When I plugged it in, I hear the new device recognition tone but nothing else. Supposedly, the correct driver is part of Windows 10 and nothing else was needed. But it has never vibrated with any game. I've tried updating the driver, even tried it on another pc with Windows 10 and no luck.
View 2 Replies
Aug 11, 2015
I've got a Logitech F310 gamepad. It has the button in the center, which is useful in Steam when in full picture mode. But Windows 10 is treating this as the "Xbox" home button and when I press it, it brings up the little indicator window with the "Click for Help" option. How do I disable Windows from doing this with my controller while still leaving the button functionality for Steam?
View 2 Replies
Aug 28, 2015
I upgraded to windows 10 today and I had no access to the internet .. I installed the KE2200 ethernet controller driver for windows 10 from here (standard driver): [URL]... but still no luck!
The windows 10 troubleshooter identified the current driver being the problem but couldnt repair it. I didn't copy the detailed results from this troubleshoot unfortunately but will do on my next Windows 10 installation attempt.
Troubleshoot [URL]
Driver [URL]
PC Info :
Windows 7 64
MSI z87 g45
Current Ethernet driver Ke2200 W7 64
View 1 Replies
Sep 5, 2015
It gets thru part of the set up and I'm getting an error box that says Modern Setup Host has stopped working. I give up. I was hoping a repair would keep my app and docs, but I guess that option is not working. At some point I will do a clean install, if I can, I just don't have the patience to reinstall all my apps and stuff.
View 2 Replies
Nov 19, 2015
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 Replies
Sep 2, 2015
I've been getting the following error : "The group or resource is not in the correct state to perform the requested operation" Things I've already done trying to solve the problem:
1) Clean install of Windows 10.
2) Made sure my WiFi network card doesn't go to Sleep, by disabling that option in the Power Management.
3) Have set hosted network mode to allow
4) Made sure that my network with internet access is set to sharing
Additional info: It was working fine untill some random windows update, after which the PC started getting BSOD when trying to host a network. Reinstalling drivers started giving me this error instead of BSOD. Then I rolled back to windows 8.1 and checked again. It was working flawlessly. I assumed it to be a driver problem, so I upgraded to Windows 10 again and this error is back.
View 7 Replies
Jul 4, 2015
I installed Windows 10 (10130 build) and I love it. The only problem that I'm having with it is this Photo Background app that eats my cpu(30-40%)! When I start up windows I need to kill it in task manager everytime. But even after I kill it if I leave my laptop in idle it still comes back. I want to understand what this Photos Background Task Host is doing, his functionality...
View 6 Replies
Jan 23, 2016
I am surprised that this is not a topic of discussion. On my laptop which I migrated from windows 7 to 10, I always have a high CPU usage for Microsoft Search filter host. A search of the internet shows that this is an issue.
I have tried to disable with no luck. My next attempt will be a change in registry.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionImage File Execution Optionssearchfilterhost.exe]
Add a REG_SZ value named Debugger and give it data of c:windowssystem32svchost.exe.
View 1 Replies
