Drivers/Hardware :: USB 3.0 Port Transfer Speed On HP Laptop Not Exceeding 40 MBPS
Jan 31, 2016
I tested the internal HDD with CrystalDiskMark and was able to get 109 MBPS both on sequential read and write tests. Then, when I tested my 1 TB WD My Passport USB 3.0 External HDD with CrystalDiskMark the sequential read and write speed did not exceed 40 MBPS the few times I tried. Got similar 30-40 MBPS speed when transferring movies from external HDD to internal HDD.So far, I have tried updating the external HDD and USB 3.0 Controller drivers. Tried with 'USB selective suspend setting' disabled (Under Power Plan Options). Also tried with write caching enabled. But havent been able to solve the issue.My laptop is running Win 10 Home 64-Bit. I am sure I used the USB 3.0 port. And, I used the USB 3.0 cable supplied with the external HDD. I don't have another USB 3.0 device so cannot figure out whether the issue is with my laptop of the external HDD.'
View 4 Replies
Similar Messages:
Feb 10, 2016
If I tranfere big files and lots of them internally in my HDD Drive, I have noticed that if I play a videofile at the same time it will lag. I understand this is because the internal write and read speed is overloaded because of the file transfere.
What I want to know is, will the file transfere also slow down my download to the same drive, since the filetransfere is using almost all of the write speed?
View 1 Replies
Dec 29, 2015
after upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 Replies
Sep 8, 2015
My laptop has a fan problem, so I need to transfer my photos to a memory stick. In my old windows I could easily "send to" any photo and transfer it to a disc or memory stick, but I am so lost and frustrated on the new windows 10. I have only gotten as far as clicking the box, but can't figure out what next.
View 5 Replies
Jan 15, 2016
I've got all my old laptop's bookmarks stored in HTML format in an email I sent myself. But I don't know how to get that whole list into my new laptop's Firefox bookmarks.
View 7 Replies
Oct 29, 2015
Up until recently Ive had a steady and stable internet connection on all devices, however recently on one laptop the connection is now incredibly slow (multiple tests on bandwidthplace.com show download speeds of 0.1 Mbps while on another laptop connected to the same connection shows over 7mbps). Connection to my android phone works fast too, I don't know what is making this happen, Ive tried resetting the router, refreshing the connection, releasing/renewing the ip. Not sure what to do here, as I don't have this problem connected to other networks, and other devices on this network aren't experiencing the same issues.
I also updated to the latest available driver from my manufacturer's website and I'm not 100% sure if I have all the latest windows updates since the connection is barely sustained, but I believe I do as I frequently manually check for updates in addition to automatic updates being enabled.
Additional info
Microsoft Windows [Version 10.0.10240]
(c) 2015 Microsoft Corporation. All rights reserved.
C:UsersJean Pierre>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : JP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[Code] ....
View 7 Replies
Jan 31, 2016
I recently updated my HP ENVY laptop from Windows 8.1 to Windows 10 & immediately started having issues with my WIFI speed. I was able to connect to the wireless network just fine with no limited connectivity, etc but the speed crawls. It's only my laptop...all other wifi devices are running with no noticeable difference. I went through a bunch of troubleshooting steps and couldn't get it to improve.
I was able to figure out my wifi speed is great when my laptop is connected to ac power, but immediately drops speed when unplugged. All of my initial troubleshooting was on battery power.
I checked the driver Power Management tab and unchecked the Allow the computer.... option. Also Control Panel-Power Options and changed the Wireless Adapter Settings to be on Maximum Performance for both On Battery & Plugged In.
Realtek RTL8188EE 802.11 bgn Wi-Fi Adapter with updated driver.
View 1 Replies
Nov 17, 2015
Since I updated my laptop to Windows 10 I can no longer transfer my photos from my phone to my Toshiba laptop using the USB port. It used to come up as an external drive and then I could simply view and download photos..
Do I need to do something different now, or am I missing something?
View 2 Replies
Aug 4, 2015
Ever since i updated my laptop to windows 10, the fan has been running on full speed and i am not running anything intensive (just Firefox), task manager shows some Microsoft background task host and i really don't want to change back to 8.1.
Model: Lenovo G510
Cpu: Intel Core I5-4200M @2.50ghz
Graphics: Amd Radeon HD 8570M (1gb)
Ram: 4gb DDr3
View 24 Replies
Oct 24, 2015
Bought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.
View 9 Replies
Jan 25, 2016
Ok so I have a wireless Bluetooth device. It has worked fine connected to a windows 7 and 8 computer. Now I am trying it on 10. For the software I wrote for it to work properly I need to be able to specify which COM port it uses when connecting.
In windows 7 and 8 I would then go to "Bluetooth settings", click "New Connection", and then follow the setup wizard. Here I would be able to set the device to be in Dev mode and specify the COM port to always use. In the new windows 10 "Bluetooth settings" program I can not find a way to do this.
Also I have two different "Bluetooth settings" programs show up in the start menu. One I can open up and it will show my device, but I am unable to do what I mentioned above. The other program with this name has the same icon as what is on my Windows 7 and 8 machines, but gives me the error "unable to start correctly (0xc000007b)"
View 1 Replies
Dec 13, 2015
I'm using a current Intel NUC (NUC5i3RYH) running Windows 10 Home x64.
I have this infuriating problem which may be related to the hardware but may also possibly be fixed in the OS. I've had no success so far changing power and sleep settings in the BIOS and Device Manager. I've had no luck with Intel directly.
The symptom is that any (of two different) USB TV tuners I use seems to lose the quality of signal anything from 20 minutes to an hour after I access that channel. If I change channel and then return straight back it instantly fixes it.
any registry or other settings I could try? Alternatively some utility or task I could use to poll or wakeup the port periodically? I'm just lost on this and have spent over a month off and on trying to work out ways of making it work.
View 6 Replies
Oct 18, 2015
i have pc with GE port n using cat5e cable but when im conected to modem huawei HG8245 its only detect 100mbps when im try manual set to 1.0gbps lan network say unplug.
View 9 Replies
Oct 19, 2015
I do not know why, but ever since (thats when I started downloading again) I have upgraded from windows 8.1 to windows 10, downloading is really difficult. when I was still using 8.1, I used Orbit downloader to download my files, but since I have upgraded to windows 10, all apps were lost, and for some reason I cant download Orbit again.
Now I have been switching from on Download manager to the other, from Eagle Get, IDM, Jdownloader. still my download speed SUCK, it is slow as a turtle. but when I am playing online games it is fine, my ping is good, when I am streaming videos it is also fast. but when it comes to downloading IT IS SLOW. why ? is it because of the download manager ? I remember updating my Battlefield 4 and the speed is good. but now, it so slow.
View 1 Replies
Dec 16, 2015
Often when playing games, either in browser or not, the mouse pointer speed will change by itself. I can go into the mouse setup menu and change it back, but sometimes it then changes again. This happened in Win7 also. The touchpad also sometimes just stops working. This didn't happen in Win7. I gotta say Win10 makes some weird changes to things
View 1 Replies
Dec 24, 2015
My lappie has USB3 ports. Or course I know the clock down to whatever device you attach. I have a 500G Seagate External rated at USB2. Meaning my transfers should be 480 megabits per second (mbps), or 60 megabytes per second (MBps), correct? So why am I getting half that speed if I am lucky. Not plugged into a USB hub or anything, straight into the port. IS there some setting I am missing?
View 3 Replies
Nov 9, 2015
i'm on Windows 10 on a 240gb ssd, I want to transfer to an WD caviar blue-[URL] I don't know if I should boot from the hdd, but when I plugged it in, it had all the old files from my previous pc and is split into 3 How do I delete everything on it? Do I set it as default from the setup utility? I don't really want to re-install windows 10 on the hdd the only files I have on the ssd is mostly drivers but documents and music I want to carry over
View 1 Replies
Jan 19, 2016
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 Replies
Dec 23, 2015
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
View 1 Replies
Mar 8, 2016
I am using a new W10 laptop, with newly-installed software for controlling a telescope. This requires a USB-Serial adapter, which I have used successfully with W7 on an earlier machine. Now I cannot configure the COM ports. I get the message "Device (or COM Port) does not exist". I have tried setting the COM port in Device Manager to all numbers from 1 to 15, but with the same results.
View 6 Replies
Oct 31, 2015
I don't see in the Mail App how to change the ports.
I'd need to change the SMTP port to 26 (not standard but my mail server is configured this way).
I know an e-mail client like Outlook or Thunderbird would allow it but this is not what I need at the moment.
The only option I found was SSL or no SSL, but I did not find how to pick the actual port.
View 7 Replies
Apr 7, 2015
Last night I have updated my laptop (Alienware mx17r3) to Win 10 Tech build 10041, updated all my drivers now my display port is not working, When booting I can see it showing BIOS and post screen but once I am in windows just goes dead with a msg no display port detected. Running my laptop screen, dell ultrasharp-u2913wm (Display port) and dell S2340L (VGA) port. On VGA both screen works fine no problem but as soon as I try running on display port dead as a doornail. I checked device manager its not even detecting the 3rd screen. Have updated latest drives from intel and ran windows update but to no avail.
View 1 Replies
Dec 9, 2015
Since installing windows 10 I can't use USB....
View 1 Replies
Dec 5, 2015
So I bought a new monitor, the MG279Q and tried plugging it in to my PC via displayport, the monitor comes with a DP->miniDP cable, (from GTX780 DP to monitors miniDP) and the monitor gives no signal. However the computer does recognize the monitor and for example gives the sound alarm for new device attached. I can also see the device describes as "Generic pnp monitor" and I can see it in the Windows's own control panel for monitor + the nvidia control panel (pics in the end). But it won't allow me to set the monitor to use..
I suspected that the cable might be broken so I tested it with my UX32LN (GeForce 840M) laptop which has a miniDP. I plugged it to the monitor (from laptops miniDP to monitors normal DP, the monitor has both DP and mDP) and wow, image straight away. So the cable should be fine I guess.. But this is somewhat of an different situation as I use different port in the monitor compared to my desktops GTX780. And I don't have other computers or gadgets that I could use to test the monitors miniDP port.
Next I plugged in the monitor via HDMI to my desktop and that worked just fine. It recognizes the monitor without problems. Using my old XL2411Z monitor with DVI + MG279Q with DP or the MG279Q with HDMI+DP at the same time I can see the MG279Q being connected twice but it only chooses the HDMI connection and doesn't let me change it to DP even though it shows the connection.
Here are some pics to explain it better:
Multiple panel settings window. It shows the MG279Q on the top (under GTX780 the one not clicked) but it won't let me click it to use. Sometimes it lets me tick it for a second but instantly ticks the box off. The monitor nro 2 is the MG279Q via HDMI.
Surround+PhysX window shows that I've connected the monitor via DP but it is greyed out. It also won't let me make a surround set with the Xl2411z + mg279q DP.
Changing resolution settings only displays the HDMI connected monitor.
So I tried uninstalling the Nvidia drivers + freshly installing them, did not work at all. Neither did uninstalling the generic pnp monitor so the computer would reinstall the displays drivers. I also freshly installed from Win7 Pro -> Win 10 Pro and no difference (was intended to do that later on anyway so I thought that I might check, my laptop is running Win10 and it's DP worked after all). I also went to BIOS and checked that iGPU is disabled + monitor setting is set to PCIE instead of auto, no use. I would also test the GTX780's DP on other desktop computer but I can't. Anyway I'm somewhat suspecting a software/hardware compatibility issue as the monitor is being recognized. Doubt the fact that the monitors miniDP or my graphics cards DP port is broken..
What should I do or try? I really want to run the monitor via DP so I can utilize the 144Hz refresh rate.
Tech specs:
PC: P8Z68-V PRO/GEN3 (bios v3202) + i7 2700K, GTX 780 DC2 (vbios 80.80.21.00.AS04), 4x4GB 1600Mhz DDR3, AX 760 PSU, Win10 Pro
Monitor(s): MG279Q + XL2411Z
View 9 Replies
Sep 2, 2015
After the cumulative update on 30 Aug 2015 WiFi isn't working... Even if I connect to Ethernet port it is not recognising. What to do
View 5 Replies
Aug 4, 2015
Lenovo USB port replicator to work with a DVI monitor attached? I can't get win 10 to recognize that another monitor is attached.
View 1 Replies
