Drivers/Hardware :: USB Tethering Still Not Working?
Feb 10, 2016
so, the same as usual when it comes to my luck: I'm trying to tether my internet connection from my note 5 to my PC via USB, and it doesn't work. here are a few details that I can give you of what occurs when I try to do this:
I plug in my phone via usb, and it recognizes it off the bat.
I go to my settings in android and enable usb tethering.
windows makes the sound that happens when you disconnect a device, then proceeds to slow down. WAY down.
I hover over the network icon in the system tray, and it just shows the line for loading or identifying.
clicking on the icon or trying to open the network and sharing center while I'm in usb tether mode results in nothing.
I did however manage to disable tethering, them open the network and sharing center, then enable my usb tethering. from there, it shows my device in the center, but says that it is disabled.
I right click and select ENABLE, it says "ENABLING", then "ENABLED", but does not actually enable my device.
View 3 Replies
Similar Messages:
Dec 29, 2015
This feature was not supported in WP8.1 so the question is have they finally added it in WP10?
View 1 Replies
Nov 18, 2015
I know that you can use Linux to connect to Internet via bluetooth on your Android phone, and it runs smoothly, more less, but Windows seems to be far more problematic when it comes to this. Is there such a possibility? And if so, how?
View 4 Replies
Jan 19, 2016
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 Replies
Aug 9, 2015
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Aug 25, 2015
I installed windows 10 for my Asus laptop(which was running windows 8.1 pro and the mic worked perfectly) , and the microphone just doesn't work. I tried to install the latest win 10 drivers for Via, and that didn't work. Are there any fixes for this problem, or am I just out of luck?
View 1 Replies
Aug 19, 2015
So, I downloaded Windows 10 a week ago, and checked for updates, but no driver updates came up. But I know that my Video Card was out of date, as I kept getting an error and also, my Bluetooth is not working. Hence my point, is there any third party app that allows you to download and update drivers?
View 4 Replies
Feb 10, 2016
When I tried to play a disc in the dvd player nothing happened, so I checked in Device Manager and the dvd had a yellow triangle on it, so I uninstalled it then restarted the computer. There was no change so I checked the error report and found this:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
I opened regedit and went to {4D36E965-E325-11CE-BFC1-08002BE10318}, there was a lower listed but not an upper. I restarted the computer but the DVD still is not working.
View 4 Replies
Aug 17, 2015
I have a Centrios Desktop Microphone with a 6.4mm Jack. My Lenovo Thinkpad Edge E420 obviously doesn't have a 6.4 mm Audio Jack but it does have 1 Jack for both Audio and Microphones. I found an adapter from 6.4mm Female to 3.5mm Male. When i plug the Microphone into the adapter and the adapter into the Laptop it weirdly plays music out of the microphone and thinks it is a Speaker according to the control panel. I also have a splitter to make the 1 dual jack into two separate microphone and audio. I am not sure how to get the Desktop Microphone to work as a microphone.The Microphone will work on any other computer with a single microphone jack.
View 5 Replies
Jan 1, 2016
I have a Anitech P201RU keyboard and when I boot my PC the keyboard works fine until the login screen. I have tried turning on legacy in bios and turning it off and tried uninstalling the drivers. What I noticed is that when I go into device manager it shows a exclamation mark next to the usb composite device.
View 3 Replies
Dec 19, 2015
Since my PC was updated to Windows 10 I have been having trouble with USB devices not working. It appears the drivers do not load or do not work. Example is my Saitek rudder pedals. They appear to be fully installed and appear in the device list but they do not work. I go into the device manager and update the driver to the exact same driver and it works. I plug in my iPhone and it is recognized as an iPhone but appears in the Other Devices with a yellow exclamation. A check and it says there are no drivers. Manually find the drivers and update them and it is good until I pull it out. Next time I plug it in same thing. Phantom 3 pro wont show the disk drive and have to load in a generic disk drive driver and all good. This list goes on.
View 1 Replies
Jan 20, 2016
So a few days ago I finished my new build, I went for for Win 10 with DirectX12 in mind. However, my mic does not work, neither through the front or back panel. The PC detects that an audio jack has been connected, detect the mic through both panels, but the mic itself does not pick out any voice. I tried reinstalling Realtek drivers, motherboard drivers, raising the level on Recording Devices and none worked. I'm using ASRock x99 Extreme3 Motherboard. Is there anything else that I can try? The mic works on my laptop and any other device, it's a Steel Series Syberia v2 Headset. Just updated Realtek Audio to 7720 v and still nothing.
View 9 Replies
Aug 15, 2015
My F drive isn't working. I can't access it from my card reader or the card slot in my computer.Location is not available.F: is unavilable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. If the location is on a network, make sure you're connected to the network or internet and then try again. If the location still can't be found, it might have been moved or deleted. I tried reassigning a new drive letter, but the computer won't let me. I also disabled and then enabled the drive to no avail.
View 2 Replies
Aug 7, 2015
My cd burner is not working after installing windows 10
View 12 Replies
Feb 4, 2016
I started to upgrade all my drivers since I downloaded windows 10. Everything was going along fine until I hit the driver on my mouse. Gone the mouse disappeared. There was no way to get it back. So I finally hooked up another mouse and tried to go back and roll back the driver to the other version. The roll back box won't lite up and it has to be lite to be able to roll back.
View 8 Replies
Aug 7, 2015
When I upgraded to Windows 10 I could not access the internet. I tried downloading and installing the latest drivers for my Killer e2205, but that didn't work. I've tried using spare USB WiFi adapters, but that didn't work. I even tried using a PCIe Ethernet adapter, but that didn't work. I've been without internet access on my main PC for 4 days now. How do I get my nic to work again? I've uploaded an album of my environment. I don't think I've had a problem that's seemed this unfixable before.
[URL] ...
View 4 Replies
Sep 11, 2015
After upgrading to Windows 10, the scanning on my HP printer doesn't work. The other printer functions work o.k.Should I simply delete the printer and reinstall it?
View 1 Replies
Apr 14, 2016
I have a Acer Aspire E17 with a precision touchpad. The touchpad works, but I prefer the mouse. Sometimes when I am using the mouse I hear a strange sound then it stops working. It only lasts for about 10 seconds then the sound returns and the mouse works again.
View 5 Replies
Oct 3, 2015
I got my new Wi-Fi adapter today (TL-WDN4200) and in order to access its 5Ghz connecting capabilities, you have to download the updated drivers off the TP-Link website. I did just that. However when I go to device manager, right click my WiFi adapter and update the drivers. This error message appears when I click on the driver file: [URL] ...
I have windows 10 64 bit. Will that be the problem? since TP-Link has not released any official drivers for Windows 10 yet? Will I need to revert back to Windows 8.1 to access the 5Ghz connection?
View 1 Replies
Oct 22, 2015
Earlier today I was playing my usual online game when suddenly the sound stopped working. It had been working just fine earlier and I hadn't changed anything except maybe updating Adobe Flash. After a while the sound suddenly came back and then it disappeared and hasn't returned. I've been looking through all the Device Manager and Sound Control, but nothing seems to be working. When I slide the sliders in the volume mixer Speakers/ Headphones and System Sounds lights up green. In the sound panel on the speaker icon there is a green check mark. This is all happening on my pc not my mac. So I'm not sure if I pressed a button during my gaming or if adobe flash might've messed up something. I've posted this thread here because everything I looked up points to Drivers, but to me it seems like they're working???
View 6 Replies
Aug 29, 2015
WEBCAM NOT WORKING. I have a Toshiba DX730 All-in-One desktop PC running Windows 10. Since I upgraded to Windows 10 my integrated webcam has not worked. I have unsuccessfully tried the following:-
1. Checked the BIOS to ensure the webcam is enabled - it is.
2. Uninstalled/installed the appropriate drivers from Toshiba Support numerous times, including after a clean boot.
3. Uninstalled the hardware from Device Manager numerous times. An interesting point here is that the webcam does not appear in Device Manager under Imaging Devices, but is shown under Other Devices as USB 2.0 Camera, next to which is the dreaded yellow exclamation mark. Right clicking this and selecting Properties always shows that no driver is installed. I've run Driver Update and pointed it to the appropriate folder, but Windows always fails to find the driver.
4. Uninstalled Skype, just in case it was causing a conflict.
5. Run the software in compatibility mode.
None of this has worked!! When I open the Camera app the following error message appears "Something went wrong. Make sure your camera is connected and not being used by another app". Skype cannot detect a webcam.
View 6 Replies
Mar 5, 2016
OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out,
View 2 Replies
Aug 30, 2015
I recently did a Windows 10 clean install on two laptops, afterward I installed Intel RST on both of them using the executable (not F6 method). In Intel RST under performance features the only feature listed is Link Power Management; Dynamic Storage Accelerator and Smart Response Technology are both missing.The one laptop only has a HDD. The other has a SSD and a HDD in the CD drive bay.How can I get Dynamic Storage Accelerator and Smart Response Technology to show up? If Link Power Management is the only thing available is there any benefit to having Intel RST installed?
View 3 Replies
Jan 18, 2016
I have an Advent Monza S200 laptop. I've recently upgraded to Windows 10. Before I upgraded my touch pad was working fine, but after the upgrade my touch pad stopped working.
Once my laptop is turned on, the cursor is not visable on the screen, the touch pad is unresponsive too. If I plug in an external mouse, the cursor re-appears and I can control my computer that way, although as soon as I un-connect my external mouse the cursor stays on the screen but I can't control it with the touch pad.
I can un-install the touch pad drivers, then re-install them from the Advent webpage and the touch pad will work perfectly until I turn my laptop off, then when I switch my laptop back on, I'm back to square one again and can't do anything unless I plug in my external mouse.
I've tried asking on the Advent forums but they don't seem to have had any traffic since early 2013.
View 1 Replies
Oct 9, 2015
bluetooth option not showing... device manager says 'device working properly'...actually i want to share my wifi via bluetooth... currently doing it via usb using PdaNet ... but my cord is not long enough to the location i desire.
View 7 Replies
