Drivers/Hardware :: USB To HDMI Converter Does Not Work
Nov 15, 2015
I have an Acer Aspire V17 Nitro laptop (i7, 16 Gb RAM) which I am using with an external monitor (through the built-in HDMI port).
I recently purchased a USB to HDMI converter so that I could have a second external monitor. This was advertised as being applicable for Windows 7 and 8.1 systems so I figured it should work for Windows 10 also.
Unfortunately when I installed the software, the system crashed. Eventually I managed to restore it to an earlier point so I managed to get the system back to normal. However I cannot seem to be able to find any way of getting this device to work on my laptop. I tried allowing Windows to find the best driver, and even tried a third-party driver that I found on the internet but to no avail.
When I contacted the supplier he said that he had written to his own supplier about this but got no reply, so he offered me half of what I had paid for it as a refund. I accepted this but would really like to be able to use the device.
View 4 Replies
Similar Messages:
Nov 19, 2015
I have an Asus Desktop. I plugged a working HDMI cord into my older Sony Bravia TV (Smart TV). I have a GTX 760 192 Bit NVIDIA graphics card. I went to the NVIDIA control panel, and it wont read the TV. I tried going through the windows 10 64 bit version of trying to find connected devices, and the TV shows up but as a media streaming device. It almost seems like the PC itself doesn't know it has an HDMI slot.
View 3 Replies
Dec 29, 2015
after upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 Replies
Sep 5, 2015
After upgrade to w10 the sound via the HDMI port went missing. On this machine you press a button to switch from PC Mode to Game Mode, which activates the HDMI port where the PVR is plugged in. When viewing a PVR program (TV show), the video is perfect but there is no sound. I have updated drivers, rolled back drivers, & tried everything I can think of.(besides the PVR audio).I have an HP Omni 27 1055 Desktop PC.
View 9 Replies
Dec 25, 2015
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.
View 9 Replies
Aug 11, 2015
I currently have an Asus Vivopc desktop that I use as an htpc and it is connected directly to my LG LB5800 tv. The PC has onboard speakers which sound terrible and when I connect the tv via HDMI, the video works fine but no sound comes from the tv.
I still get sound from the PC but no matter what I can see, there is no option whatsoever to have the TV as a playback device. It isn't listed at all. I've reinstalled the intel and realtek drivers but that didn't work. I've opened up the playback devices, shown disabled devices and it didn't show up either.
With Windows 8 it worked flawlessly. With Windows 8.1 it would only work when I rebooted the computer with the TV on, otherwise the device would disappear as soon as it was turned off. With Windows 10, it just isn't there at all.
View 6 Replies
Dec 10, 2015
Windows 10 plays Mp3 Files just fine. Connect an HDMI cable to the video output port, and then windows 10 suddenly wont play those files. An error message pops us inside windows media player and Grove that this file type is not supported. Also no sound is played through the HDMI Cable to my TV, and no sound is played when i click the volume bar on the bottom right side.
I work for an integration company. We just installed a couple of conference rooms for a company in which we have an HDMI cable running from the table through the floor in the walls and to the TV. From there it breaks out into the Amplifier and plays audio in the room. Normally i bring my Mac book pro for testing but i purchased this Windows 10 computer as a test device. I did not have a second laptop with me to test this out.
However, With the computer and the HDMI cable i am getting video to the TV. When i enter my TV menu and arrow around the menu option my sound works on the built in speakers in the room. So i can confirm that the cabling is all correct. This is the identical setup that we always use. I have also plugged my Iphone into the cabling behind the TV and played music which worked perfectly fine.
The computer, as i mentioned, would play MP3 files perfectly fine, untill i plugged in the HDMI cable. Infact i can be playing and MP3 file and then plug in the hdmi cable and suddenly the computer stops playing the MP3 file and gives me the error that windows can not support this file type. Those same MP3's play on an SDCard in the TV when i access them directly from the tv. So those files are not bad. Also anything with audio fails to play anywhere (tv or locally on the laptop) when the HDMI is plugged in.
Also i have gone to the control panel and selected the Audio section and looked at the video card / audio output selections. When i have no HDMI cable selected the option for audio output changes to the internal sound card. (which is correct) and then i plug in the HDMI Cable and the audio switches to the HDMI output (which is correct)
the only two conclusions i can come up with are this particular computer has a bad video card. or windows 10 is not supporting audio output. I have never tested our setups with windows 10 before.
Last bit i'll include this is a brand new computer. Core i5 8Gb ram 1tb hard drive. its a toshiba.
View 2 Replies
Jan 1, 2016
Windows 10 Pro x 64, Amd-1090 T Cpu, 16 Gb's Ram... 6890 Gpu -2Gb,s Ram... I'm in need of a Mp4 to Dvd free converter and if possible with burner. I have been trying to find one for a while now but all the ones I find say free but they are just trial versions. The two real free one's I found so far are... AnyBurn but it seems to do everything except convert from Mp4 to Dvd. HandBrake but it does not have Mp4 to Dvd that I can see. It will convert to MPEG-2 and MPEG-4 but what I've read this extensions will produce a low quality output. I need to burn at 1920 x 1080 HD..
View 4 Replies
Nov 16, 2015
Ever since I updated to Windows 10, I've been having this issue. On computer start up with the TV on and set to the computer source, it works fine. As soon as we switch the TV source or turn the TV off we lose the audio when we go back to the computer source. The Philips TV I use as my monitor disappears from the available sound sources, and I have a red x in the volume setting on the task bar.
Rebooting the computer is the only way I've found to bring the sound back. This is the exact same computer and TV I used with no issues for over a year before upgrading to Windows 10.
I have installed the latest realtek audio driver listed on this site. I have used the ACER care centre to look for updates, but it says there are none. I've also tried switch out from the realtek to the standard windows driver, but nothing has solved the problem.
I have an ACER XC-605 media PC.
Operating system : ,Microsoft Windows 10 Home 64-bit
Processor : ,Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz
Memory : ,6GB
Graphics device : ,Intel(R) HD Graphics 4400
Audio device 1 : ,Intel(R) Display Audio
Audio device 2 : ,Realtek High Definition Audio
View 1 Replies
Sep 19, 2015
Just this past day I upgraded my Dell XPS 15 from Windows 7 to Windows 10, and I noticed I'm now having the same issue as many recently-upgraded users, specifically that when connected to a TV via HDMI, audio does not switch over to my TV's speakers, however, it stays with my computer's speakers, and video works perfectly fine.
In the audio devices panel, the Digital Audio (HDMI) speakers are displayed, but are listed as "not plugged in", as displayed below.
My drivers are all updated, cables tested on multiple devices, I'm running a NVIDIA GeForce GT 540M, driver version 10.18.13.5362
I've seen this problem in other threads, tried multiple solutions, but to no avail, therefore would like a solution specific to my model/make.
View 6 Replies
Oct 2, 2015
I need a video converter that will convert the video and keep the same codecs, bit rates, etc. and will set a thumbnail for the video.
View 1 Replies
Jul 31, 2015
I just bought a HP Stream x360 yesterday and upgraded it to Windows 10, the issue is that the touchscreen will no longer work. It worked with 8.1 but not with 10. I have checked with Windows Update and installed all of the updates. I have also checked with the HP driver support to see if any needed to be installed and it said none (if I did it right).
View 9 Replies
Feb 10, 2016
So last time I Disabled the head phones in the Sound>Playback device list and after that I couldn't see them on this list anymore (Even when checking Show Disabled Devices) I already tried Updating the Driver in Device Manager>Sound,Video and Game controllers>(HeadPhones)>Properties>Driver and it still didn't work , I also tried Re-Installing them from computer and Restarting the Computer and nothing worked. I don't have any panel jack Disable front detection option in Realtek HD Audio Manager
I'm on Toshiba Laptop, Windows 10 and using Logitech G930 HeadSet. No hedphones nor microphone are enabled , and i can not change it.
View 2 Replies
Jul 30, 2015
I recently upgraded from windows 7 to windows 10. My mouse worked fine in windows 7, but it does not work in windows 10. Without my mouse to work with, I am lost on the computer.
Information from the Control Panel (System) is as follows:
HP pavilion dv5 notebooselectk PC , windows 10 Home , 64-bit operating system .
The mouse that I have is a Rocketfish Nano Laptop Optical Mouse.
Information from the Control Panel (Harware and Sound) (Devises and Printers) shows an icon
of the RF Nano Laptop Optical Mouse.
When I select the icon , there is information at the bottom of the page that reads:
RF Nano Laptop Optical Mouse Status: Driver error
Model: Rf Nano Laptop Optic...
Category: Mouse
Status: Needs troubleshooting
More info from the Control Panel (Hardware and Sound) (Devises and Printers) is taken from the Mouse link.
The (Hardware tab) in the Mouse link shows two different types of mouse.
One is a Pluralinput Mouse 0.8.2.0 and the other is a Synaptics P/S2 Port Touch Pad.
The Pluralinput information reads:
Manufacturer : Pluralinput
Location : on RF Nano Laptop Optical Mouse
Devise status : This devise cannot start (Code 10)
View 5 Replies
Sep 22, 2015
I was trying to add a printer and I had the message that the printer spooler don't work! I tried 3 different ways manually via command prompt and via windows devices system and force start automatically but nothing. it cant start. Some messages i got trying to fix it it was there are no resources for this operation!
View 1 Replies
Dec 10, 2015
I've read that if I install an older driver it should work. But I seem unable to even get an older driver to install.
I'm on Windows 10 Pro.
View 6 Replies
Dec 30, 2015
When starting up my laptop this morning, my wireless mouse didn't work. I replaced the battery, still didn't work. Tried on another computer, the mouse did work. I went to look in device manager, the mouse wasn't detected by the laptop. I tried to connect my external harddrive, it got power but also wasn't detected by my laptop. Everything worked fine yesterday.
View 2 Replies
Nov 20, 2015
I have a set of Z506 and I cant seem to get the two rear speakers to work.I double checked my work and still nothing. I already have windows setup to run in 5.1, and even there the two rears wont play a sound.
View 5 Replies
Mar 5, 2016
I have two desktops using a single keyboard, monitor and mouse via a KVM device. One desktop is running Windows 7 but I've just upgraded the other from Windows 8 to Windows 10.
All was 100% well on both machines before the upgrade. The Windows 7 machine is still fine (as you'd expect!) but on the Windows 10 machine hitting the key on the keyboard has no effect whatsoever. On Windows 10 set up I chose "UK keyboard" as usual; I think I've always done whenever I've loaded any version of Windows.
(The sharper ones amongst you will have realised that I'm typing this on the Windows 7 machine!!!)
View 4 Replies
Aug 4, 2015
Why doesn't my printer work since I upgraded to Windows 10? I checked the drivers. all is ok.
View 1 Replies
Jul 29, 2015
My sound won't work after I installed windows 10. I'm using Conexant SmartAudio HD by the way. I tried using youtube for a solution but everything was for older builds.
View 4 Replies
Feb 10, 2016
Recently, I acquired a Microsoft Bluetooth Mouse (3600). It works perfectly well, both on my Android tablet and on my old but efficient Netbook (still running valiantly under XP SP3). Never a problem in pairing the mouse on these two machines (and no problem either with the Logitech Bluetooth portable keyboard (K480), which is a real marvel in its own right).On the Android Lollipop tablet, Bluetooth is built in, while the built-in Bluetooth feature on the Netbook gave up some time ago, but was replaced by a dongle, which does its job without a hiccup.
So far, so good.On my desktop, running on Windows 10, which has no built-in Bluetooth capability (but the Bluetooth "service" coming with Windows), I use the same dongle as on the Netbook. With the Logitech keyboard mentioned above, no problem whatsoever: Bluetooth "sees" it immediately and pairs it in seconds - so there is certainly nothing wrong either with the dongle or with pairing a device, or the Bluetooth drivers and softwares, which came with the dongle, or with the Windows Bluetooth properties, which are correctly started and functioning.)
It's the Microsoft Mouse that presents an apparently intractable problem on that same desktop.
When activating the Mouse so that it can be detected when one wants to add a device, it is "seen" almost immediately. It is when wanting to pair the device to the machine that the problem arises. The pairing as such takes a far longer time than it normally does and when that operation concludes, I get error messages saying either that the mouse did not send the correct pairing code OR that it did not send a pairing reaction at all.
So, this is quite mysterious. Having a device that functions perfectly well with other machines, and not at all on my powerful desktop (while it can be detected, and while other devices function normally).I guess that the problem resides with that "code". However, Windows does not ask for it and Microsoft says that the mouse does not need one - which makes things even more strange, since it mentions a code when the pairing misfires.They are in Dutch (language of my Win OS) but the images speak for themselves. The error message on the 3rd screenshot says: "Communication with Bluetooth device has failed / No pairing reaction received". Sometimes (after bootup) the error message says failure but "Bluetooth device sends wrong code".
View 1 Replies
Nov 20, 2015
I actually have two issues (the second being that the built-in microphone isn't working, but that's the least of my worries). I have my laptop connected to an external monitor & I can't get any non-system sounds to play.
Dell Laptop w/ only HDMI video connected to Dell VGA monitor (no speakers) via an adapter that has a 3.5mm jack for speakers. I can get system sounds via the laptop's speakers, but I can't play MP3s and YouTube videos have no sound. I had things working at one point (no, I cannot remember what I did or can find the tutorial that I used), but after moving my desk (unhooking the laptop from the monitor), cussing at non-functional microphone, and setting things back up, I'm back to no sounds. When I did get the speakers to work, they were working on the 3.5mm headphone/microphone jack on the laptop, but not through the jack on the HDMI/VGA adapter.
I've seen things about disabling the HDMI audio controller. I cannot change the default audio devices via the sound dialog box that is available by right-clicking on the sound icon on the bottom right of the screen. I'm assuming that the Dell speakers that are stuck as default are the on-board ones on the laptop.
View 1 Replies
Nov 19, 2015
I have a laptop - Asus GL551JW-DS71.
My speakers work fine but when I plug in my headphones, I can't hear any sound from the headphones. The headphones do work as I use them for my desktop.
I have tried updating the sound drivers from the device manager.
I have tried removing the drivers and redownloading the audio drivers from Acers website.
I have tried 'installing' audio driver with the default windows 10 audio driver instead of the realtek one.
I have tried adjusting the sample rate in the advanced properties tab.
What can I do to get sound working in my headphones again and not just the speakers.
View 4 Replies
Jan 13, 2016
I upgraded from Windows 7 to Windows 10 a few months ago. Yesterday the disc drive stopped working. I put in a disc I had made which contained various data, mostly text. When I clicked the D recovery drive nothing happened. In the past I would see a list of the videos on the disk and by clicking one of the items I could play it on Movies and TV. Now that doesn't work. I can play videos that I've downloaded and are in my videos file, but not videos from the disc drive. I have an HP Pavilion slimline desktop computer.
View 2 Replies
Dec 7, 2015
When you start Windows 10 keyboard does not work since the upgrade to 1511
View 1 Replies
