I have 3 drives on my computer:
My windows drive (SSD) on C:
My Gaming drive (HDD) on D:
My Extra space drive (HDD) on E:
I can not format E:
Here is my Disc management:
I have tried opening an Admin Command Prompt and typing: BCDBOOT C:WINDOWS /s C:
I wish to get rid of all files on E: so I can use it for raw videos.
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
View 9 RepliesI have several external USB3 500G and 1TB drives that were formatted with HFS for macs, I can read them an copy from them, but not write tot them (in win10). But I have cleaned some off, and want to reformat to exFAT so they can be be used cross platform. But when I try and format, either quick or otherwise, win10 won't let me.
View 1 RepliesOn my laptop I have a 1 TB HDD and on that drive the usable space was formatted into 2 separate partitions. This doesn't work well for me and I would prefer to have just one partition with all of the usable space. So I've tried everything I can think of and for some reason I just can't get the partitions to merge or even delete the secondary partition and expand the one I want to use. I have some pictures below to show what's going on.
This one shows the two partitions that I want merged.
This next one shows that I cannot extend the partition even if the other partition was deleted and is unpartitioned space
This last one shows that even with a 3rd party software I get the same result as EaseUS Partition Master doesn't give me the option to merge or move/re-size the partition
So at this point I'm stumped and I don't understand why this won't work as I've done the same thing with many other computers easily in disk management.
I tried the Windows 10 upgrade when it first came out and immediately went back to 8.1 when I couldn't get a single one of my internal SATA hard drives to mount.. I have 5 of them, and I just wasn't about to mess with that when 8.1 had no problems at all. Now I have tried it again and the same problem is happening. I want to see if I can figure it out this time. I am using the latest SATA and Chipset drivers for Win10 64 bit from Gigabyte's Website (I am using a Gigabyte Z77X-UD5H Rev. 1.1.
I am "testing" Win10 using a bootable clone of my main SSD (that still has 8.1 on it) and I upgraded it to 10 just to mess with so I can figure out this ridiculous problem.
My problem is that all of my internal SATA hard drives (with the exception of the system drive) cannot be assigned a drive letter in Disk Management. They show as healthy NTFS partitions but I get 1 of 2 different errors when I click on "Change Drive letters and Paths":
1. "Virtual Disk Manager: The System cannot find the file specified."
2 "Disk Management: The operation filed to complete because the Disk Management Console view is not up-to date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart disk management or restart the computer" Hint: none of the recommended fixes in the error message change anything.
I HAVE been able to assign the partitions a letter and mount them using a third party disk manager called "MiniTool Partition Wizard". It lets me mount the partitions and it works! ..However, if I restart the computer, I am back to square one and have to manually assign each drive letter for each partition every time.
This is easily the worst experience I have ever had upgrading an OS, and one of the most mind boggling issues I have had with Windows in general. I really like Windows 10 and want to keep using it but half of my hard drives being un-mountable is a complete deal breaker right now.
The power went out while doing a Windows 10 update. I purchased a USB to SATA connector, connected it to another Windows 10 PC's USB port. The external hard drive that I removed from my other PC is not showing in Windows File Manager.
View 9 RepliesI have a PC running Windows 10 on which the Administrator Password either has been lost or changed. How do I go about either resetting the Administrator Password or formatting the drive and starting over?
View 1 RepliesI Bought an HP Pavilion Slimline (s5310f) computer in 2010 with Windows 7 Factory installed OS. Than I upgraded to Windows 7 Ultimate OS.
Installed Windows 10 Pro.
I deleted Windows/OLD.
What is in the Factory Image that shows up in MY PC files ? It is also listed in System Restore? Is it Windows 10 Pro or Windows 7 that originally came with purchase.
I read somewhere that Windows 10 does not have a Factory Restore only Recovery.
[URL] ...
Is it safe to format the Factory Restore drive D for other uses?
I had 3x 3TB drives in a parity pool. It started to fill up so i added a fourth 3TB drive and months later one of the original 3 began to fail on me. Performance was slow, then slower, then it showed disconnected.
I retired the drive and added a replacement, literally the same model 3TB drive. I cannot however, get it to remove the failed physical disk and repair the pool. I even tried adding another 2TB drive i had available in case it needed the extra space (didn't make sense but i was reaching).
I get the "drive could not be removed because not all data could be reallocated. add an additional drive to this pool and reattempt this operation."
I have searched a lot and don't really seem to be getting anywhere. The only way i was able to retire the drive was through powershell. I'm assuming it's a GUI issue and perhaps i'm not approaching it correctly via powershell. Attempting to repair virtual disk didn't work.
I really don't want to lose this data. I wasn't able to backup much before the drive failed completely.
Upgraded to windows 10 pro via the media creation tool...its activated and going pretty well..so now i want to format my hard drive and clean install it...how can i do this safely? and will it be deactivated if i do a format?
View 1 RepliesWhy, after rotating a photo from landscape format to portrait on my PC, does the thumbnail stay in landscape format even though the photo is now in portrait format?
In Windows 7 and previous Windows OS's, the thumbnail of photos rotated with the actual photo but in 10 the thumbnail does not rotate with the photo. How can I correct this?
I have to do an install of Windows 10. It was only a few days ago I just installed to a hdd. The hdd is clearly screwed at a certain point. I copied a load of stuff to it and it is now totally locked into doing something. Whatever it is trying to figure out - I have seen it do it before. Just to cut a long story short - I am about to install win10 to a new drive. ssd incidentally.
do I need to completely format over that disk partition with win 10 on it before doing a new install on the new drive? What I am asking is whether it will refuse to license it if it detects another win10 on the system. Just that portion of the disk is screwed but I have stuff on different parts of that disk that are fine... They can stay. I will simply consider that partition out of bounds from now on.
I have a 4TB HD that was previously formatted that I've put into an external hd bay. When I go into Computer Management/Disk Management the hd is not listed in the top section and in the bottom section it is split into 2048 GB and 1678 GB, both "Unallocated". I want to reformat the hd into one partition but the only available option when I right click the larger partition is "New Simple Volume" and for the smaller partition there are no options available at all. Nowhere does it give me the choice to delete everything or just reformat the entire drive.
View 2 RepliesIf so, what are my options? This HDD came from HP w/Win 7. I upgraded it to Win 10 but would like to clone it to the SSD for the speed increase.
View 2 RepliesI used my usb to boot Ubuntu onto my laptop that I hoped that I could diagnose it but it didn't work.
Now, I'd like to use of as a normal usb drive but windows doesn't like formatting it...
I tried many methods to get it formatted but none of them worked.
Purchased a WD 6TB Blue yesterday, ran disk management and created one partition using NTFS. Formatted and did its thing but it just displays the total size of the partition with RAW next to it. Tried reformatting again to NTFS but I get the error; "The format did not complete successfully".
Deleted the partition and tried to create a 2TB partition out of the drive with the exact same scenario happening again. Tried swapping between GPT and MBR with no success. Also tried a different SATA port with a different cable and same thing.
Ran Windows error checking and WD LifeGuard on Extended Test over night and both came back with no errors.
Ran Disk Part in cmd, after entering in clean i get the error; "DiskPart has encountered an error: The device is not connected. See the System Event Log for more information."
Code:
Log Name: SystemSource: VDS Basic ProviderDate: 26/11/2015 11:38:34 AMEvent ID: 5Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: TimsDescription:Cannot zero sectors on disk ?PhysicalDrive0. Error code: 48F@0101000FEvent Xml:<Event xmlns
[Code] .....
DVD-RW are re-writable correct? I tired to format it and it said i couldn't because of write protection is there any way I can remove the write protection on it?
View 2 RepliesUnfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 RepliesWhen I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesI have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 RepliesToday i did a fresh install of win 10 Home today on my laptop but i'm unable to see my NAS Drive in my network. I can put the nas address into the address bar in my Network and i can access it but i don't like to do it that way. I also use Kodi media center and now my nas is not showing in my network i can't add media content.
View 9 RepliesI cannot assign a drive letter to a partition. When I right click the partition I only get the word "Help". The partition states as "Healthy (Recovery Partition).
View 9 Replies