Unfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
New to 10 and unable to install Samsung printer ML1210. printer remains offline but shows samsung universal printer driver installed. I understand this is a recognised problem
View 1 RepliesI have a Dell Inspiron SE 7520 with Intel HD 4000 and HD 7730M. So I tried every possible solution to this and nothing. I uninstalled the drivers (both). Tried to use the latest drivers for both and nothing. Tried every other possible fix (Scandisk, sfc/scannow, etc) and I can't make both drivers work at the same time. Only thing I can do is make Intel 4000 work alone, but not the 7730. If I let 4000 work alone I can use my notebook, otherwise is endless reboot.
Problem happened when I was playing Fallout 4, I received a message of "Driver crashed and recovery", but then I got BSOD with endless reboot. All messages on the blue screen are about drivers. (I get diferrent messages). I reinstalled Windows 10 but it didnt fixed it. I tried Windows 7 and nothing. It seems that there isn't a fix for this, what should I do?
I did a clean install of Windows 10 on my Lenovo Miix 2 8 tablet. Everything went fine. But, I wasn't able to install the driver for the internal GPS. It's a Broadcom BCM4752. The installation of all drivers I found (including Lenovo) ended with the message: "An upgrade was needed. Please reboot your system and restart the installer." Which I did - but, it didn't work!
Installing the driver under Windows 8.1 and upgrading to Windows 10 worked without problems!
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
View 5 RepliesSince changing to W10 I am unable to install the above on my lap top, both worked fine on my old vista machine, little notice comes saying something like ..incompatable with the O.S, is there away to get around this ?
The printer, an Epson DX4400 is a few years old I know, but it is still very good and I dont really want to get rid of it.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 RepliesI have been installing and reinstalling windows 10 through bootcamp 6 on El Captain on my Macbook Pro.
But i keep getting the same result - the speakers and right click option are missing.
Where i can download drivers for Windows 10 on bootcamp 6 or what other way to resolve this issue.
With W8.1, when I plugged my phone (Samsung Galaxy S5) into my PC via USB, a box came up with an option to find pictures and video on the phone.
Now with W10 that option does not come up, nothing comes up but it the phone shows in explorer as a hard drive.
So I have a Lenovo Z480 and just installed Windows 10 on it. I used to have Win7 earlier and i'm still using the same drivers. I tried Connecting my Samsung Galaxy S4 to it via Bluetooth and It woudnt even detect it. It detects other laptops around it though.
My phone also doesn't seem to detect the laptop but detects others.
Where have the Bluetooth phone operations and setting screen gone when I right click on my iPhone under devices and printers that option is not there which means I cannot show screen when phone rings or want to play audio files from my phone the option was there in windows 8.1
View 2 RepliesOn W7 i had my nokia lumia 900 unlocked and could plug it into my pc via the usb and it showed up as another drive.this allowed me to add remove music files etc. since installing W10 it no longer shows up?Indeed w10 seems to be changing things that it wants without me okaying it,if this continues i will be going back to w7. Q: How can i get my phone showing up as a drive i on w10.
View 5 RepliesWhat I do know is that before I upgraded to Windows 10, there was always a box under (what is now) the heading "This PC". If I connected anything to the computer via a USB cable the computer would automatically recognize it and I would be able to transfer files.
Basically, I have a USB cable that I am using to connect my Samsung Galaxy S4 to my computer, an Acer Aspire. When I plug them into each other nothing happens. There is no pop-up window on my computer that even registers that the device is connected. I've tried multiple times to click the "This PC" button to see if the phone is connected, but it actually seems to be reading other devices around me and asking if I want to connect to them.
I would have used Cortana to ask, but unfortunately I'm having a serious problem with the fact that every single little thing I want to do from the desktop (you know, all the cool new apps or whatnot) requires me to sign into my microsoft account. Unfortunately for me, I created my account so long ago that the verification email they send your forgotten password to I have actually been locked out of because I don't know the password for that, and cannot have the security code sent to my phone since they have a very old number.
Im using windows 10 tp on my lumia 920 and im unable to unlock it from lockscreen using my pin. After i enter my key it just stays like that, even if i enter a wrong key it deoes not show that the key enterd is wrong.
View 9 RepliesSince upgrading to Windows 10 I have had to keep extending the primary partition, now up to 250Gb and full. I do have free capacity on another partition from which I have been taking spare capacity with any problems so far, but the partition tool won't let me take any more.
View 9 RepliesI have 3 drives on my computer:
My windows drive (SSD) on C:
My Gaming drive (HDD) on D:
My Extra space drive (HDD) on E:
I can not format E:
Here is my Disc management:
I have tried opening an Admin Command Prompt and typing: BCDBOOT C:WINDOWS /s C:
I wish to get rid of all files on E: so I can use it for raw videos.
Ok so I have a wireless Bluetooth device. It has worked fine connected to a windows 7 and 8 computer. Now I am trying it on 10. For the software I wrote for it to work properly I need to be able to specify which COM port it uses when connecting.
In windows 7 and 8 I would then go to "Bluetooth settings", click "New Connection", and then follow the setup wizard. Here I would be able to set the device to be in Dev mode and specify the COM port to always use. In the new windows 10 "Bluetooth settings" program I can not find a way to do this.
Also I have two different "Bluetooth settings" programs show up in the start menu. One I can open up and it will show my device, but I am unable to do what I mentioned above. The other program with this name has the same icon as what is on my Windows 7 and 8 machines, but gives me the error "unable to start correctly (0xc000007b)"
In the Device Manager I went to Mice and other pointing devices > HID-compliant mouse > Properties > Power Management > Allow this device to wake the computer, and unchecked it. But still the mouse wakes up the laptop from sleep. Why?
View 1 RepliesI am currently unable to access my Local Disks, or open programs inside them, such as the task manager, user account control, and even the registry editor. Attempting to open anything (With administrator priveleges) just result in an access denied message. I have tried multiple solutions off the first searches on google, though none of them have worked, due to the things required in those solutions not being able to be accessed.
I have even tried to reset my PC and reinstall Windows, though when I click the "Get Started" button, nothing happens.
Is there any hope left for me, or do I need to get new drivers and abandon my valuable data?
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and installed. On reboot get continual bsod as above. No restore point since upgrade. Can't boot to Windows. how to get past the bsod
View 1 RepliesOn my laptop I have a 1 TB HDD and on that drive the usable space was formatted into 2 separate partitions. This doesn't work well for me and I would prefer to have just one partition with all of the usable space. So I've tried everything I can think of and for some reason I just can't get the partitions to merge or even delete the secondary partition and expand the one I want to use. I have some pictures below to show what's going on.
This one shows the two partitions that I want merged.
This next one shows that I cannot extend the partition even if the other partition was deleted and is unpartitioned space
This last one shows that even with a 3rd party software I get the same result as EaseUS Partition Master doesn't give me the option to merge or move/re-size the partition
So at this point I'm stumped and I don't understand why this won't work as I've done the same thing with many other computers easily in disk management.
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
I tried the Windows 10 upgrade when it first came out and immediately went back to 8.1 when I couldn't get a single one of my internal SATA hard drives to mount.. I have 5 of them, and I just wasn't about to mess with that when 8.1 had no problems at all. Now I have tried it again and the same problem is happening. I want to see if I can figure it out this time. I am using the latest SATA and Chipset drivers for Win10 64 bit from Gigabyte's Website (I am using a Gigabyte Z77X-UD5H Rev. 1.1.
I am "testing" Win10 using a bootable clone of my main SSD (that still has 8.1 on it) and I upgraded it to 10 just to mess with so I can figure out this ridiculous problem.
My problem is that all of my internal SATA hard drives (with the exception of the system drive) cannot be assigned a drive letter in Disk Management. They show as healthy NTFS partitions but I get 1 of 2 different errors when I click on "Change Drive letters and Paths":
1. "Virtual Disk Manager: The System cannot find the file specified."
2 "Disk Management: The operation filed to complete because the Disk Management Console view is not up-to date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart disk management or restart the computer" Hint: none of the recommended fixes in the error message change anything.
I HAVE been able to assign the partitions a letter and mount them using a third party disk manager called "MiniTool Partition Wizard". It lets me mount the partitions and it works! ..However, if I restart the computer, I am back to square one and have to manually assign each drive letter for each partition every time.
This is easily the worst experience I have ever had upgrading an OS, and one of the most mind boggling issues I have had with Windows in general. I really like Windows 10 and want to keep using it but half of my hard drives being un-mountable is a complete deal breaker right now.
I just assembled a new PC. It has a single 4TB hard drive. During Windows 10 installation, I created a 200gb partition to install to as the C: drive. It auto partitioned my drive into a 500MB system reserved partition, my C: drive, and two unallocated spaces of 1852.69GB and 1678.02GB respectively. The 1852GB space I can create a partition on, but the 1678GB space I cannot do anything with: Cannot create a partition, and cannot combine it with the rest of the unallocated space.
I would like to combine the two unallocated spaces to create a single partition from the remaining unallocated spaces, but cannot figure out how. I contacted Microsoft tech support via chat, allowed them to remote in to my machine, but they could not determine the issue either.
The power went out while doing a Windows 10 update. I purchased a USB to SATA connector, connected it to another Windows 10 PC's USB port. The external hard drive that I removed from my other PC is not showing in Windows File Manager.
View 9 Replies