Drivers/Hardware :: Unknown Partition / File System - Cannot Edit Or Remove
Nov 13, 2015
I was in the process of updating several sata controllers and chipset drivers. I also installed a new USB 3.0 hub and was in the process of moving around several devices between ports. I had a problem with my keyboard which uses USB 2.0 as a connector but I would recieve a "Unknown USB Device (Port Reset Failed)" code 43 on every port on the USB 3.0 Hub. I finally gave up and put the keyboard back into the 2.0 ports on my motherboard. When I finally fixed everything. I realized my DVD drive was not working. I had to reconnect the SATA cables because it got disconnected while I was moving my PC around. Upon the last restart of my PC.
I checked Disk Managment and noticed lots of system reserved partitions and drives which were not there before. What happened but I think updating several drivers and the combination of reinstalling USB ports via device manager or the optical drive being reconnected may have messed up how windows used to have system reserves as partitions. I only had one visible system reserved drive before, now I have 2 visible and lettered system reserved drives.
I also have a unknown partition at the top of the list, I cannot right click that partition and select any options. The only option in my context menu which brings me a link to Overview of Disk Management
I also had my video quick access as my DVD optical drive when I restarted. I have fixed this issue by changing my quick access links back to their proper folders and it removed the duplicate Videos Icon. My quick access links were remapped to the G: drive (CD Drive), they were usually on the F: drive. Why Windows did that during my driver updates and restarts.
I have only provided the above information to know what the unknown partition is and why I cannot modify or remove it. It's the recovery partition of the C: Drive. The System Reserved E: Drive, System Reserved D: Drive are both considered primary partitions.
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
I have recently built my own PC. During the initial setup process my friend create a partition on my ssd. I would like to remove the partition without losing anything.
I have a 250 GB SSD and a 1TB HDD. My OS and personal data is on the SSD. I want to keep everything where it is at or at least be able to put it back.
is there any way to move EVERYTHING to my HDD, clean the SSD, then move it back.
I had 2 useless partitions, one at the very beginning of my HD and the second at the very end. My setup is GPT Basic btw.
I would like to know, using MiniTool Partition Wizard version 9.1, if it is possible to merge these former partitions (now 'unallocated' space) into the Windows partition (C??
I right clicked on both of the unallocated space 'partitions' but any operations (namely, move) was greyed out.
I would like to clean up the disk layout (even if we are talking about only 1 GB. of space)
The volume (V:) is formatted as Fat32. Maximum Fat32 volume size is 2 TB. To regain all of the volume space, format as NTFS, or split into 2TB and 1TB Fat32 volumes.
I originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it,
my drives and partitions look like this:
I'm not sure if to remove the old SYSTEM partition or not, and if the SSD needs one also, My boot is also a lot slower on windows 10
my ASUS X54C Computer, powered by Windows 10. My conversion was smooth and seemed to function well but after Chrome 47 was rolled out in late Nov/early December, I had so much trouble, that I temporarily switched to Firefox as a browser. Lately, it seemed to be functioning well and I went back to Chrome. Last week, without warning, my printer was switched to offline and running the Windows Diagnostic just produced an ERROR message. Today, I tried to install a new printer which my computer did not recognize so I called a techie. It seems that an unknown IP address had installed itself on my hard drive and things were inadvertently being shut down without my knowledge.
That has been corrected/removed (and a McAfee Virus Scan has so far not revealed any issues) but here is my question: I recently sent about 135 emails through Eventbrite - could any of those emails addresses been compromised by coming from my computer or do I assume that Eventbrite's system is rigorous enough to weed out any unwanted passengers?
A file called backup.txt is trying to open every time I turn on my laptop. It never opens because there's no default application for the file, so Windows usually asks me which app I want to open it with. I chose notepad because it was a txt file, but nothing happened.
I was looking to see if there is a way to add the W7 File, Edit, Tools, Help, etc. Menus to W10 Folders. I searched but found nothing at all. Maybe I am not searching correctly or calling it the correct thing.
If not, is there any way to add commands to the Quick Access Toolbar in Folders? I see you can add some limited stuff like Redo, Rename, etc. But I would like to add some basic commands like copy and paste, etc.
When renaming a file in File Explorer I am frequently, but not always, stymied by the system re-selecting the entire filename whilst I am in the midst of editing it. It occurs anytime from 1-2s after I start editing up to 10s or more. I typically am using the back arrow to move to the point I am editing, and Shift+arrow to select text. It may happen before or after I have used Shift+arrow to select text.It's frustrating because I have to essentially anticipate the system possibly reselecting the whole filename, and if it does, restart my edit again.
I have a 1TB external USB hard drive, it is not showing up in 'my computer' the light on the hard drive is constantly flashing and randomly beeps and clicks when first plugged in, I have never heard this until today..
I have tried it on two laptops, windows 7 and windows 10 and in a macbook, does not show up.
I have tried a different cable from another USB device, still no luck.
It appears in device manager which says it is running normally, I have tried un-installing and re-installing, no luck! In disk manager it says the disk is unknown and not initialized, see screenshot.
Reading other forums suggest trying Minitool partition wizard it comes up but as 0GB, screenshot
I am getting numerous Device Disconnected sounds and occasionally Device Connected sounds.
I am trying to trace the source of these and started looking in the event logs.
There does not appear to be any events with Critical or Error tags showing.
Should the Device Disconnected event create a log entry?
If it does not can one be created to give me a clue as to what has been disconnected? Everything still appears to be working after a Device Disconnected sound is heard.
HW M/b: ASUS P9X79LE CPU: Intel i7-4930K 3.4GHz RAM: 32GB HDD: 2 x 2TB in RAID 1 HDD: 1 x 2TB O/S Windows 10 fresh install and updates to 10586.36
Fresh install of Windows 10 and the last driver I need to sort out is the above.
I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.
I have a fat32 100mb system partition in my windows disk management it's also showing in aomei partition assistant file system fat32, capacity 100mb, used space 28.75 mb free space 71.25 mb flag is gpt,efi status is system. Installed windows 10 from a usb flash drive and I could not convert from efi to gpt or something like that so I deleted the windows partition which is my c drive (ssd) and that's when I got this showing up in windows.
Can I copy the boot files to the c drive and just deleted this system partition and use the partition software to merge the space back to the c drive so I can use it. Or do I have to reformat and start all over again? I deleted the c drive partition that windows was on and created a new one and it created reserved space and recovery space which I have got ride of and deleted and merged the unallocated space for both back to the c drive.
I hesitate about doing anything with this partition until I'm sure of what I'm doing so that My computer will still boot up. I can only boot into windows 10 from the windows boot manager and not straight from the cdrive the primary (SSD).
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was cloned from the Asus Pc to Samsung SSD. Windows 7 runs great off the SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". I would like to upgrade to Win10 on this pc.
I have an SSD with WIN7 installed. It has no System Reserved Partition (SRP) and thus no boot files on that nonexistent partition.
I've read here that individuals with a SRP of only 100mb have had issues installing WIN 10 and that those issues were resolved by expanding the SRP from 100mb to 450mb.
Will WIN 10 install if I have no SRP? Will it merely alter the boot files on my C drive?
I know about increasing the partition size but i dont know where it is on my pre-built pc. I do have a 128mb partition but i cant increase the size on my third party manager
I'm trying to update from 8.1 64-bit to 10 on my i7 24GB Toshiba laptop. I keep getting the message "Windows 10 couldn't be installed. We couldn't update the system reserved partition."
The very first try "failed" with an error Code C1900200. After that, every installation attempt shows "canceled" w/ an error Code 8024000B.
Note: "DISK 1" is my primary (boot) disk; "DISK 0" is my data disk. Both disks are 256Gb SSD drives. Other info is in my System Specs.
I do not see a "reserved partition" on Disk 1; could this be the problem? I'd rather not do a clean install, in order to keep existing programs/settings etc., but will do so if necessary.
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was migrated from the Asus Pc to Samsung SSD. Windows 7 boots and runs great off the Samsung SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". A friend used Aomei to create a System Reserved partition but Win10 still gives the same message about the system reserved partition.
Every time I try to update and install windows 10 I get this error. It seems as if my reserve partition is too small to download windows 10. How would I go about fixing this issue. I have had a dual boot of linux in the past but got rid of it months ago.
When I try to upgrade my Dell XPS 15 running Win 8.1 to Win 10 I get a message "we couldn't update the system reserved partition", I only have an EFI system partition, not the 100MB DATA partition I've read about.
I really wanted to upgrade to windows 10 but I get an error saying that my system reserve partition could not be updated. Ive looked on tens and hundreds of threads and forums and they say to increase the partition size from 100 to 350. Except i dont have a system reserve at 100mb. This is my disk management. URL...