Drivers/Hardware :: Updated And Sleep Mode Is No Longer Available
Aug 23, 2015
A few days ago I updated my HP Envy laptop from Windows 8 to Windows 10. I used to be able to close the lid and the computer would enter sleep mode, and come out of it when I opened the lid. After updating, it now goes into hibernation mode when I close the lid. In the Sleep and Power Settings, the only options available for me to choose for when I close the laptop lid are "Do Nothing," "Hibernate," and "Shut Down."
Following recommendations for similar issues, I updated the driver for my display adapter. Unfortunately, this hasn't changed anything. I've noticed, however, that in the Device Manager, the symbol next to the Intel(R) HD Graphics Family has a little exclamation point in a yellow triangle. Under the display adapter Device status it reads "Windows has stopped this device because it has reported problems. (Code 43)"
In addition to finding no mention of sleep mode anywhere on my computer, I'm now unable to change the screen brightness by any means.
I read somewhere that I can allow sleep mode by changing something related to the BIOS? This sounds complicated.
View 2 Replies
Similar Messages:
Aug 24, 2015
A few days ago I updated my HP Envy laptop from Windows 8 to Windows 10. I used to be able to close the lid and the computer would enter sleep mode, and come out of it when I opened the lid. After updating, it now goes into hibernation mode when I close the lid. In the Sleep and Power Settings, the only options available for me to choose for when I close the laptop lid are "Do Nothing," "Hibernate," and "Shut Down."
Following recommendations for similar issues, I updated the driver for my display adapter. Unfortunately, this hasn't changed anything. I've noticed, however, that in the Device Manager, the symbol next to the Intel(R) HD Graphics Family has a little exclamation point in a yellow triangle. Under the display adapter Device status it reads "Windows has stopped this device because it has reported problems. (Code 43)"
In addition to finding no mention of sleep mode anywhere on my computer, I'm now unable to change the screen brightness by any means. I read somewhere that I can allow sleep mode by changing something related to the BIOS? This sounds complicated.
View 9 Replies
Jul 29, 2015
I have a generic Microsoft 200 keyboard and I'm running into two issues:
1) My keyboard goes into sleep mode every 5 seconds. I can tell because the Num Lock light goes off and comes back on when I hit any key.
2) If I long press a key, it seems to go into "sticky" mode and keeps pressing until I press it back again. This is especially troublesome when playing video games.
- I've checked power saving modes, all seems ok at default.
- I've checked and Sticky Keys is disabled as well as any user accessibility option.
View 7 Replies
Nov 11, 2015
I had this issue with my PC in January and went to all the trouble of a rebuild and a new motherboard. That was with Windows 8.1. However I now have this issue in Windows 10, it suddenly started a month ago. I am not moving the mouse or pressing any buttons. There is a 2-3 minutes gap and the system comes out from 'sleep' mode.
View 3 Replies
Jan 6, 2016
I have a MadCatz Rat9 wireless mouse and in windows 10 when I go to sleep mode the wireless mouse does not charge. I had windows 7 ul before and the mouse charged fine in sleep mode. In device manager I checked the mouse drivers and in power management allow the computer to turn off this device to save power is greyed out. Allow this device to wake the computer has a checkmark. why windows 7 charged ok in sleep mode and windows 10 will not.
View 1 Replies
Aug 4, 2015
My machine will go into hibernate mode, but will not go into sleep mode. I just want to be able to wake it with the touch of the mouse.
View 1 Replies
Jul 30, 2015
I just installed Windows 10 and have got a problem that has me stumped. I have two GPUs, an EVGA GTX 760 as my primary and a GTX 560 Ti running a second monitor. The 760 had no issues in the upgrade, but no matter what I do to the 560, it shows up in device manager as Code 43. I'm trying to gauge if it's an issue with the fact I have two dissimilar GPUs or a bit of software not liking that particular card. My gut says software, but I don't know exactly what. I've done some googling to the effect and seems to be I'm not the only one with troubles but didn't find a fix that worked.I don't want to roll back just yet and my 760 can pick up the slack easily, so if there's a fix on the horizon I can wait. Otherwise, I'll have to check my options.
View 1 Replies
Oct 2, 2015
I recently updated my OS to Windows 10 and now whenever I try scrolling down or up a page using my mousepad, nothing happens and it doesn't scroll. How can I fix this?
I have the Asus Flip 2in1 13.3" TouchScreen Laptop Intel Core i3 4GB Memory 500GB Hard Drive Black TP300LADS31T
View 2 Replies
Jan 29, 2016
I installed Windows 10 right after it came out and have had very few problems but in just the last few days it stopped waking from sleep. The power light used to flash and it would wake from a mouse or keyboard button press but no longer. The system power will come on from a press of the power button but the screen remains blank. If I remove power from the system and then repower it and turn it on it will start the BIOS and re-boot to the state that it was in when I put it into sleep mode. Clearly the hibernate process is working but something is haywire with the wake process. How to troubleshoot?
View 2 Replies
Feb 23, 2016
Since the 19th when my computer installed the following updates
Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3135173)
Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3119142)
Security Update for Adobe Flash Player for Windows 10 Version 1511 for x64-based Systems (KB3135782)
it will no longer fully shut down. Having encountered this issue when I first upgraded to 10 I went to turn off hybrid sleep, and the option is currently disabled on the device. However, the only way to fully shut it down is to hold the power button till it shuts off.
Is there any way to fix this? I'd rather not have to unplug everything every time I shut it off just so the lights won't keep me awake.
View 2 Replies
Aug 28, 2015
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 Replies
Dec 2, 2015
I have a HP Envy that is only 11 months old. I installed Windows 10 not too long ago and now I am experiencing issues with the sleep mode function. I have tried many other suggestions in power troubleshooter and other "fixes", but nothing is working.
Here's the issue. When my laptop enters sleep mode, I cannot wake it up. The keyboard is unresponsive with the exception of the backlight key. No matter what I do, I cannot wake it and this includes Ctrl + Alt + Delete. The power button remains lit, but the screen remains black and will not wakeup. The only way to fix this is to hard reboot the laptop by holding the power button down until it shuts off and then reboot it.
View 1 Replies
Aug 15, 2015
so im placing the computer in sleep mode sometimes it goes to sleep and then wakes up after 1 min or it just turns of the screens. i found it in the event viewer i think i turned of almost everything in device manager so that the devices can't wake the computer.
View 6 Replies
Aug 2, 2015
Running a Dell XPS 15, (L502X). Upgraded from 7 to 10 Pro yesterday. Played around a bit with the new OS and then went off to other things. Laptop went into sleep mode after 15 minutes as it always has. But this time I couldn't wake it up. Required me to power off the unit, then power it back on. Same thing happens now each time the machine goes to sleep mode.
View 9 Replies
Sep 6, 2015
The brightness in my pc cannot be changed so i searched the internet until i found a solution and when i did the instructions i found out that Sleep mode has been removed from my PC.
View 1 Replies
Nov 21, 2015
Recently, my Windows 10 installation started to give me BSOD's. Never after a fresh boot, but always (some time) after the PC has been in sleep mode.
Please see the attached files......
View 7 Replies
Aug 8, 2015
my computer is not going in sleep mode even my settings are in sleep mode.
View 1 Replies
Aug 30, 2015
Since I upgraded to windows 10 from windows 7 my pc every night wakes its self from sleep mode. I did the command prompt and it said a wake timer was waking my pc, I have been unable to find a wake timer. How to fix this?
View 3 Replies
Sep 21, 2015
In Power and Sleep I have set sleep mode to be entered after a certain time. It does not enter sleep mode as set. If I ask it to enter sleep mode on the power down option it will activate sleep but when I return to the computer later it has already turned itself on.
View 3 Replies
Nov 24, 2015
when my computer goes into sleep mode I have to turn it completely off and do a restart to get it going.
View 2 Replies
Nov 10, 2015
I cannot wake up my pc from sleep mode in windows 10.
View 1 Replies
Nov 30, 2015
My pc with windows 10 pro version 1511 goes not in sleep mode.
When i press the sleep button on the keyboard it worked.
Set i the pc so that i must go to sleep mode after 1 min. The screen will be black but he pc does not go to sleep . None.
SYSTEM:
[DRIVER] DFX Audio Enhancer (ROOTMEDIA000)
Currently one audio stream is used
[DRIVER] Realtek High Definition Audio (HDAUDIOFUNC_01&VEN_10EC&DEV_0892&SUBSYS_1043841B&REV_10034&141f45d&0&0001)
Currently one audio stream is used
[PROCESS] DeviceHarddiskVolume3WindowsSystem32dllhost.exe
View 1 Replies
Mar 21, 2016
My pc monitor won't turn back on once it turns off in sleep mode
View 1 Replies
Sep 3, 2015
i am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 Replies
Jan 30, 2016
Windows 10 is simply not able to enter sleep mode. Whenever I try, the monitor shuts off, but the computer power does not. When I move the mouse, the log-in screen appears (as it would when your computer comes out of sleep).I looked at Windows Event Viewer, and this is what I found for my attempt to sleep just a moment ago (Event 10016, DistributedCOM):"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB70 2511 C276} to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."
I went to these IDs in regedit, and attempted to change their security permissions. I received an error message saying "Unable to save permission changes on {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}" (or the CLSID).Looking at the above CLSID registry entry more closely, I find that it corresponds to a program called RunTimeBroker.exe. The official Windows website has instructions on how to change the permissions for this program, namely, by opening Component services, going to RunTimeBroker, opening its Properties, and adjusting its Access Permissions in the Security tab.
View 7 Replies
Jan 30, 2016
I have a problem with my Asus S56C, I have frequent BSODs, but they only occur after few seconds or few minutes out of the Stand By mode. It does not happen after restarting restarting or turning on the PC. I have already tested the RAM and Hard Drives. Updating to Win 8.1 and then 10 did not change the problem or the way it happens. Since it might be a driver problem, I have tried to play a little bit with Driver Verifier but the drivers are so many that I was not able to identify only one and then I stopped because it was really too time consuming. I updated all thedrivers manually from the Control Panel, but it did not change anything. For the rest the computer is fine, I sent it to the ASUS Service when was still under warranty and they replaced RAM, HD, DVD-ROM, but not the 24 Gb SSD. It also came back with a clean Windows 8 but it had the same problem after installing just Avast, Chrome and Mozilla (I have already uninstalled Avast and no improvements).
View 1 Replies
