Drivers/Hardware :: Wireless Printing Fails
Nov 19, 2015
I recently bought an HP 2540 wireless printer that is Windows 8 and 10 compatible. I setup the computer, used disk for the Win8 and downloaded the Win10 driver and installed on the second laptop. Both Asus laptops printed and then quit.I have reinstalled printer, run every diagnostic I can find and still cannot get either to print.
View 2 Replies
Similar Messages:
Aug 2, 2015
After upgrading to Windows 10, I've been having tremendous problems getting my Brother MFC-J430W working wirelessly, installing the latest Windows 8.1 x64 drivers from their website works fine and it detects the printer through wireless right away.
My problems with it are the Printer constantly says its offline under the Windows 10 printing tab however the Brother's icon shows the device connected and ready and even shows me the current ink levels. The only way I can currently print a document is by restarting my computer, and very quickly sending a document to print before it goes offline again. So basically the printer only seems to connect online when I restart the computer but goes offline within a minute or two, I didn't experience this issue in Windows 8.1 x64.
View 1 Replies
Oct 5, 2015
When i upgraded to windows 10 on my toshiba laptop the display changed from black printing on a white background to blue printing on a black background which i can"t read. my old eyes aren't working so well any more and i would like to switch back to the black on white.
View 1 Replies
Aug 23, 2015
I downloaded windows 10 but now my printer is not printing from different websites or from my email accounts. I have a Canon MX700 series. It will print only things that I have in Microsoft word but not from any site online.
I also get the error message...Awww Snap or something. I never had problems printing until the download.
View 3 Replies
Aug 28, 2015
Just trying to add a wireless wifi printer that's on my network and I'm running into this error.
View 1 Replies
Aug 28, 2015
I have a multifunction HP C5280 printer connected via USB to my router that has a built in printer server and it's a couple of days I can't print through it from my laptop anymore (but I still can print from my smartphone as always).
The problem started when I removed the device from control panel to try installing the latest driver downloaded from the HP website, because I wasn't able to scan from it, but at least I still could print. Since then, even if the printer appears as ready, Windows doesn't even send documents to the spooler: the printer icon appears on the taskbar but it just says "0 document(s) pending".
Additional informations: I already uninstalled the downloaded new driver and installed back the previous working one and it's not a spooler problem since I can print if I directly connect the printer through the laptop USB.
View 3 Replies
Aug 11, 2015
On installing Win !0 there was no wireless function, but win 10 initialised the card however when the laptop sleeps the card drops out and it has to be reset every time the card is Intel(R) Pro/Wireless 3945ABG. If the laptop is kept awake there is no problem
View 5 Replies
Jul 30, 2015
I recently upgraded from windows 7 to windows 10. My mouse worked fine in windows 7, but it does not work in windows 10. Without my mouse to work with, I am lost on the computer.
Information from the Control Panel (System) is as follows:
HP pavilion dv5 notebooselectk PC , windows 10 Home , 64-bit operating system .
The mouse that I have is a Rocketfish Nano Laptop Optical Mouse.
Information from the Control Panel (Harware and Sound) (Devises and Printers) shows an icon
of the RF Nano Laptop Optical Mouse.
When I select the icon , there is information at the bottom of the page that reads:
RF Nano Laptop Optical Mouse Status: Driver error
Model: Rf Nano Laptop Optic...
Category: Mouse
Status: Needs troubleshooting
More info from the Control Panel (Hardware and Sound) (Devises and Printers) is taken from the Mouse link.
The (Hardware tab) in the Mouse link shows two different types of mouse.
One is a Pluralinput Mouse 0.8.2.0 and the other is a Synaptics P/S2 Port Touch Pad.
The Pluralinput information reads:
Manufacturer : Pluralinput
Location : on RF Nano Laptop Optical Mouse
Devise status : This devise cannot start (Code 10)
View 5 Replies
Aug 30, 2015
I've had a Logitech M510 mouse for about a month and time is running out on a return. My problem is jerky and intermittent movement problems. These may have a workaround my using a USB extension cable since moving the receiver away from USB 3.0 ports may eliminate the interference.
I'm thinking of returning the mouse tomorrow before the return term expires. Are there mice that do not exhibit the 3.0 interference or is this simply a technology impediment to using wireless mouce?
View 2 Replies
Dec 22, 2015
I got onto my computer this morning and noticed that it had rebooted. Figured out it updated the latest patch. However, from that point on, I haven't been able to get anything from my computer. Wireless won't work, can connect to any bluetooth device, and none of my USB thumb drives will show up. I have tried logging back out, as well as rebooting. Nothing seems to be working. Since I can't connect to anything, I can't update any drivers (writing this on my mac... )
I tried uninstalling the patch, and it won't. Just spins. Tried to do a system restore, but it won't open up the dialog to allow me to choose. Tried to do diagnostics on the wireless driver and it just hangs. I have to shut it down.
View 1 Replies
Oct 3, 2015
I have a laptop with an intel AC 7265 wireless adapter built in. With the normal Windows 10 driver, AP mode works - which I need to run Connectify.
I upgraded to the latest Intel driver as I was having other issues (Wireless would just disconnect and give me a 1609 address) but the new driver apparently doesn't support AP mode (hosted network support = no).
How I can get AP mode supported again?
View 2 Replies
Feb 10, 2016
I have had to reinstall my wireless printers everyday for the last couple of weeks. I upgraded to Windows 10 in December of 2015. I'll get the message that no driver is installed and that they are not connected to the network. One is an HP Officejet 8600 all-in-one & the other is an HP Envy 100 D410. I have had these printer a fairly long time with no problems. Now I have to go to the HP site & reinstall the drivers every day & then run the installation process again. I use their IP addresses when installing them.
View 7 Replies
Sep 9, 2015
I updated W7x64 to W10 Pro x64. The machine is WXP generation notebook. My problem is that the Intel PRO/Wireless 3945ABG is not recognized or Network and Sharing Center - Change Adapter Settings does not list this adapter. The Device Manager does show the adapter but with exclamation mark. What I have done so far are uninstalling/reinstalling the adapter and installing the drivers in compatibility mode.
View 6 Replies
Aug 30, 2015
MS wireless keyboard 800 and mouse 1000 combo. Latest MS drivers and clean install of windows 10 home. The mouse pointer frequently jerks and jumps and then after a few seconds releases and runs smoothly again. New batteries make no difference. I have moved the little receiver into various USB slots, type 2and3, to no effect.
View 3 Replies
Jan 6, 2016
I have a MadCatz Rat9 wireless mouse and in windows 10 when I go to sleep mode the wireless mouse does not charge. I had windows 7 ul before and the mouse charged fine in sleep mode. In device manager I checked the mouse drivers and in power management allow the computer to turn off this device to save power is greyed out. Allow this device to wake the computer has a checkmark. why windows 7 charged ok in sleep mode and windows 10 will not.
View 1 Replies
Feb 2, 2016
ever since I had a new hard drive installed on my Toshiba Satellite I cannot make a connection to my printer. I was on Epson Tech support for almost 3 hours, and they told me the printer is fine, and I am connected to it, but there is something blocking the print job from going to the printer.
I forgot to mention that when they installed the hard drive, they upgraded my wind. 7 to Wind. 10.
View 3 Replies
Feb 16, 2016
I recently bought a new laptop with Windows 10. My previous laptop had Windows 7 and worked very well with my Brother MFC-J475DW Wireless Printer. I tried installing the driver for the printer from the original disk that came with the printer on the W10 laptop several times and kept getting a message that there is no printer. I went to the Brother website and downloaded the latest version of the driver and still get the same message. After some research I tried for the "built in" drivers, but with no success.
View 5 Replies
Nov 12, 2015
The adapter works in windows 8.1 but does not start in windows 10. Device manager shows an exclamation mark. Installing a new driver does not work. The device manager tells me the best drivers are already installed.
View 9 Replies
Aug 23, 2015
Since upgrading to Windows 10 when ever I launch a game my wireless card gets disabled and is not enabled until I exit the game. I have tried updating drivers for the card and the graphics card and nothing has worked.
Graphics - Dual graphics Intel and Nvidia GTX860m (Drivers: 355.60)
Wireless - Intel Wireless-AC 7260 (Drivers: 18.12.1.2)
View 1 Replies
Aug 13, 2015
I'm a student and my university has a subscription to Dreamspark, so I got a Win10 key, along with an ISO-file from there. I'm using a Lenovo G700 and trying to perform a clean install from a bootable USB-stick.
I have tried creating this USB-stick with the "Win7 USB DVD Download Tool", using different guides from the internet with NTFS and Fat32 filesystem, launching the setup normally and through UEFI, using the "Media Creation Tool" ([URL]) to create the USB-stick directly and downloading the ISO file first and creating a bootable USB-stick from that with all the methods above, but no matter which of these methods I use, I get the following error during installation:
"A media driver your computer needs is missing." (URL)
Unfortunatley, I am currently running Win7 Pro x64 on my laptop and the following page says, that the upgrade to Win10 only works from Win8.1, not Win7: [URL]
When I try to use the "Media Creation Tool" to instantly perform an upgrade, I get the following error:
"Something happened... 0x80070422 - 0x90016"
What drivers could the installation possibly be missing? I don't have any external devices plugged in, except for the bootable USB-stick, of course. I tried downloading all drivers for Win7 x64 and Win10 x64 from the Lenovo page ([URL])
View 1 Replies
Oct 16, 2015
I have a SteelSeries Sensei mouse and a Razer BlackWidow keyboard. Windows 10 daily attempts to install a "SteelSeries ApS - Keyboard - SteelSeries Sensei [RAW]" update. The update fails within seconds of starting with error 0x80240016. The initial failure message darkens my screen (even when another program is full-screened) and shows a simple message, I don't currently have the verbiage and can't reproduce until Windows attempts automatically.
The update says keyboard in the name, but also says my mouse model. I'm sure it probably pertains to my mouse, but my mouse is working fine and this update fails regardless.
I've rebooted. I've attempted to install while a different mouse was plugged in. I've tried updating mouse and keyboard drivers automatically through the Device Manager ("device driver is already up to date"). I've installed keyboard and mouse drivers from the vendor sites.
Is there anyway to get Windows 10 to forget about this update and stop trying to install it?
View 1 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Mar 5, 2016
I am running Windows 10 Professional with current up-to-date updates on my Dell Inspiron Laptop.
Several days ago I noticed that plugging in current headset no longer muted the internal speaker. I know that it is not the headset as it works perfectly on another computer.
Doing a web search has not resulted in finding the problem, let alone a solution. Further my anti-virus is up-to-date, as are the microphone and speaker drivers.
View 2 Replies
Dec 13, 2015
I am not getting the print icon when I try to print an e mail - have tried altering resolution but system won't allow to change from default resolution - printing OK from excel word etc so nothing wrong with printer and it is set as default
View 5 Replies
Oct 18, 2015
can't print coupons with bar codes with Windows 10. will print anything else on internet,but not these.
View 5 Replies
Nov 21, 2015
When in file explorer, I sometimes want to print out the list of names of the folders and files for reference or to bump against another list of names of folders and files. The "share" option lists 'printer' but does not work properly. It only wants to print photos.
View 3 Replies