Drivers/Hardware :: After Update Touchpad Freezing Briefly When Using Keypad
Oct 6, 2015
I updated my laptop(HP envy m6 notebook) a few days ago from windows 8.1 to 10 and since then my touchpad/pointer has been freezing for 4-5 seconds after I touch any button on the keypad. eg. if i hit enter then i cannot move the pointer for a few seconds.. I can still use the left and right click even while the pointer will not move.
Everything worked perfectly before i upgraded to windows 10 and everything else apart from the freezing mouse seems to be working just fine after the upgrade.
View 2 Replies
Similar Messages:
Jul 31, 2015
i just upgraded to Windows 10, and everything is working fine exept for my Elan touchpad.
I have never experienced it not working for Windows 8.
View 9 Replies
Aug 14, 2015
My numeric keypad no longer works with the update. I had to manually remove the ELAN keyboard in order to get my letters and top row numbers working, but the keypad still isn't working. I also had to remove the touchpad software the updated with in order to get the touchpad working. How do I get the numeric keypad on the right to work again? I have an ASUS U57A.
View 2 Replies
Mar 31, 2015
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
View 9 Replies
Dec 5, 2015
i have a acer aspire 1v , windows ten just updated with cortana in australia , since the update my touch pad has no options for two finger functions
when i was running windows 8.1 i had options for three finger functions , that went when i installed windows ten for the first time and i could only get two finger options available , now with the latest install there is only options for one finger functions
I am have synaptics pointing device but i though i had elan pointing device...
what is also weird is when i open the synaptics pointing device in the tray manager , i have an option for accessories with pressure graph and moonpad options , not sure what they are but clicked on them and i get a message this option requires a synaptics pointing device and synaptics pointing device driver
I've tried device manager check driver update and it says working properly and driver is using the latest update.
View 2 Replies
Aug 30, 2015
After upgrading from win 7 to win 10, i'm facing issue while typing on laptop keypad. Some keys (mainly q, t, u, p, j) are repeating alphabet twice. There was no problem when i was using win 7. I'm attaching text document in which i have pressed key single time only but letter appeared twice. Also the cursor which blink while typing sometime moves one position ahead for those letter.
View 1 Replies
Apr 17, 2015
I can't get Win10 build 10049 to install my Canon Pro9000 Inkjet printer. It is connected by USB and when I turn it on, an icon appears in the taskbar briefly and then disappears. Devices show Inkjet printer but no drivers available. I downloaded latest driver from Canon site and tried again following their instructions. No joy! My Lexmark 250dn installed automatically and so did my Canoscan 8800F as well as my Canon MP490 with no problems. I have also tried compatibility mode using Win8.1 and Win7Pro.
View 6 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Dec 20, 2015
How do I stop my windows update from freezing at 91 % every night .... Windows 10 auto update .... freezes ....
View 1 Replies
Aug 21, 2015
Windows 10 Pro and I am having an issue with my Touchpad driver, it seems to want to mess up and not move to where I need it to go, so I uninstalled it from the Programs and Features menu, but my issue is it keeps popping back up in Windows Update and installing on its own, I don't want the driver for it as it doesn't function correctly with it installed it works great when its not installed so how can I hide it
View 1 Replies
Mar 22, 2016
Error shown is Video_TDR_Failure (NVLDDMKM.SYS). I got that BSOD only one time, every other time the VGA just started stuttering gradually, eventually coming into a halt and then a forced reboot.
I'm pretty sure this was caused by one of the update that Microsoft forces me to install because these kind of problems have never happened before, which you can see here [URL] ...
IMO I think it's because of KB3141032. I could be wrong though
And here's the minidump file: [URL] ...
A clean install of the newest driver doesn't work either.
Right now I've just uninstalled the newest Nvidia driver that I installed in a panic and reversed back to 355.98 (cleaned with DDU) but the damned problem still persists.
View 1 Replies
Nov 29, 2015
I use the 4 digit PIN login for Win 10. In the past, I would get the small 10 digit number keypad when I touched the PIN input box on the logon screen. Lately, on all my devices, the small keypad has been replaced by the full on screen keyboard when I touch the PIN input box on the logon screen. I've found a number of folks with the same issue, but no resolution.
View 2 Replies
Sep 28, 2015
I do not like the touch pad. When I had Windows 8.1, I simply disabled it. But Windows 10 has a mind of it's own. I go into settings for touch pad and put a check mark where it says "disable touch pad". But as soon as I restart, the touch is enabled. I go where I put the check mark and it's gone--Windows just un-checked it. There are a couple of places where I can disable it, but upon restarting it goes back to where it was. I even went in Device Manager and disabled it there, but the same thing happens.
View 9 Replies
Aug 14, 2015
since upgrading to Win 10 the Synaptics PS/2 touchpad will not scroll. I have rolled back the driver - didnt work, reinstalled the latest driver (15/7/15) -didnt work, all the relevant check boxes in device setting are enabled. (HP Pavilion dv7 Notebook PC)
View 4 Replies
Sep 12, 2015
I understand i have asked this before, but my touchpad still refuses to disable. i have tried 5 different versions of the synaptics driver, and i believe im currently running on the best version (according to my laptop). If I go to control panel and disable it from there its still no luck. its making me regret my decision to update as it worked perfectly before.
View 6 Replies
Sep 1, 2015
On my Dell Alienware m14x it seems that I can not find a way to disable the feature that enables a delay between the time you can click or move on the touchpad to when you can press a key. Meaning, if I quickly stop typing and attempt to move my touchpad, I must wait a couple of seconds before my touchpad enables itself again. This feature was added to stop people from accidentally pressing the pad while typing.
View 2 Replies
Mar 5, 2016
OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out,
View 2 Replies
Jan 18, 2016
I have an Advent Monza S200 laptop. I've recently upgraded to Windows 10. Before I upgraded my touch pad was working fine, but after the upgrade my touch pad stopped working.
Once my laptop is turned on, the cursor is not visable on the screen, the touch pad is unresponsive too. If I plug in an external mouse, the cursor re-appears and I can control my computer that way, although as soon as I un-connect my external mouse the cursor stays on the screen but I can't control it with the touch pad.
I can un-install the touch pad drivers, then re-install them from the Advent webpage and the touch pad will work perfectly until I turn my laptop off, then when I switch my laptop back on, I'm back to square one again and can't do anything unless I plug in my external mouse.
I've tried asking on the Advent forums but they don't seem to have had any traffic since early 2013.
View 1 Replies
Nov 5, 2015
I installed the new Win 10 home and now I'm unable to deactivate the touchpad. I tried to fix it in system controls and of course by "alt+F9" but nothing works... or elseway, it still works.
View 4 Replies
Jul 9, 2015
I just upgraded my windows 7 original install on my Toshiba Laptop (3 years old) to the Windows 10 Home Preview Build (10130 was installed). Everything appears to be working EXCEPT my touchpad will not scroll. It is a Synaptics V7.5 on PS-2 port. I went to the Synaptics website and don't see a windows 10 driver for this...How can i get the scrolling to work on the touchpad (everything else seems to be working on the pad)..
View 9 Replies
Aug 6, 2015
After upgrading to windows 10 my touchpad was not working, after googling around i saw someone say that windows 10 turns it off by default so i went through the device manager and turned it back on but now it is unable to click on anything and i can't use the two finger scroll thing that i use to be able to.
View 1 Replies
Jan 17, 2016
The left button on my touchpad developed a hard to describe malfunction. Turning on right-handed mode improved the functionality, but accidentally clicking the left button creates a complicated, frustrating situated which can usually only be resolved by restarting. Is there something in the settings or the registry which can disable the button until I get it fixed?
View 1 Replies
Nov 19, 2015
When opening groove music it flashes on briefly then goes off.
View 3 Replies
Oct 25, 2015
How to get rid of little black computer screen that pops up very briefly every now and then...
View 1 Replies
Sep 3, 2015
In June a friend bought a Lenovo Z50-70 laptop running Win 8.1. He particularly dislikes touchpads so uses a mouse. In 8.1 I was able to disable the touchpad for him, via Device Manager. He's now updated to Win 10 and the touchpad has come back to life. I've been trying to disable it again, so far without success.
In "Settings", the only option under touchpad is to alter the delay on using "click". I went to Control Panel.
In "Device Manager > Mice and other pointing devices" there are only two options, "HID-compliant mouse" (which has a disable option) and "Lenovo Pointing Device", which I assume refers to the touch pad (is this assumption right?) and which can be uninstalled but has no "disable" option.
In "Device Manager > Human Interface Devices" amongst other things there are two entries both named "HID-compliant vendor-defined device". Both can potentially be disabled, but without further knowledge I'm disinclined to disable them in case I inadvertently disable the mouse in the process.
View 3 Replies
Jul 29, 2015
I just updated my win7 to win10, despite several negligible issues, so far I'm rather content about it. I browsed several options, lurked around settings, internet, friends- no straight forward method found. So, how to set the touchpad back, to behave as it used to in win7? My laptop does not have touchscreen, therefore i have no need to use this built-in 'feature', which is no good for me at all.
View 5 Replies
