I have a set of Z506 and I cant seem to get the two rear speakers to work.I double checked my work and still nothing. I already have windows setup to run in 5.1, and even there the two rears wont play a sound.
View 5 RepliesI just upgraded from Windows 7 but I suddenly found a problem with my speakers.
I have an Intel DH67GD with Realtek HD Audio. The thing is that now that I upgraded to W10 I only get the option of side speakers in 5.1. My MOBO only has a rear speakers jack so obviously now that I choose 5.1 I can't hear anything behind me and no sound comes from the rear speakers. The current driver I installed is 6.0.1.7541.
I actually have two issues (the second being that the built-in microphone isn't working, but that's the least of my worries). I have my laptop connected to an external monitor & I can't get any non-system sounds to play.
Dell Laptop w/ only HDMI video connected to Dell VGA monitor (no speakers) via an adapter that has a 3.5mm jack for speakers. I can get system sounds via the laptop's speakers, but I can't play MP3s and YouTube videos have no sound. I had things working at one point (no, I cannot remember what I did or can find the tutorial that I used), but after moving my desk (unhooking the laptop from the monitor), cussing at non-functional microphone, and setting things back up, I'm back to no sounds. When I did get the speakers to work, they were working on the 3.5mm headphone/microphone jack on the laptop, but not through the jack on the HDMI/VGA adapter.
I've seen things about disabling the HDMI audio controller. I cannot change the default audio devices via the sound dialog box that is available by right-clicking on the sound icon on the bottom right of the screen. I'm assuming that the Dell speakers that are stuck as default are the on-board ones on the laptop.
I have a laptop - Asus GL551JW-DS71.
My speakers work fine but when I plug in my headphones, I can't hear any sound from the headphones. The headphones do work as I use them for my desktop.
I have tried updating the sound drivers from the device manager.
I have tried removing the drivers and redownloading the audio drivers from Acers website.
I have tried 'installing' audio driver with the default windows 10 audio driver instead of the realtek one.
I have tried adjusting the sample rate in the advanced properties tab.
What can I do to get sound working in my headphones again and not just the speakers.
Today when I plugged in my earphones (the apple ones) and there was no audio at all, but somehow it worked totally fine without the earphones. Even realtek detected something when I plugged my earphones, I also went to device manager to check if every driver is updated or not but still ended up no luck.
things i know:
- Audio is perfect without earphones plugged in
- only 'Speakers' is shown as my playback device
- went to device manager and i'm pretty sure all drivers are up to date and enabled
- everything was working fine the last time i booted into my windows10 (dual booting with linux)
- realtek detected my earphone as it popped up a notification saying 'you just plugged a device into the audio jack'
I registered today to seek for a solution to this annoying problem. I have the Logitech x350 Audio system, with 6 speakers and one sub-woofer and they worked pretty well on my former OS, Windows 8.1 x64.
Now I am currently using W10 and have used the same driver as before. However, analog output has become unchangeable, just like in this image.
I really want to use all of my speakers, as I was able to before. Only two of them work properly. I tried changing them from the Playback devices in my audio panel, but that doesn't work either.
Lost sound in window10 my speakers work but no sound. hookups are good. I have new speaker no sound.
View 3 RepliesI updated to the latest drivers for Intel AVStream Camera on my tablet / laptop. After the update, only the front camera works now.
View 1 RepliesI have a problem with any Realtek driver since I updated from Windows 8.1 to 10 (x64).On every boot, I have no sound on the rear speakers : the black pin switches automaticaly to "side". I have to reconfigure the black pin to rear every time !
View 9 RepliesAfter the install of windows 10, our speakers won't work, that are connected to our desktop computer
View 5 RepliesOn my son's laptop, he has 2 playback devices, HD audio and speakers. If set to HD audio, no sound. If set to speakers, perfect. Problem is it won't stay set to speakers. Drivers are up to date. Its a Lenovo Carbon laptop (don't have exact model with me now). PC primarily used for gaming, mostly Steam.
View 3 RepliesI started up my laptop a while ago to play some music while I do work but when I plugged in my headphones there was no music. The music plays on the speakers but headphones nothing.... I have tried many headphones on my laptop and none worked but they do work on my iPod. I am using Asus Zen Book pro UX501, windows 10 64 bit....
View 2 RepliesAfter installing Windows 10,for some reason I have no sound on my monitor speakers.I upgraded from Windows 7 where there were no problems.When I open Device Manager/ Audio inputs and outputs.click on speakers it says "this device is working properly".On trying the Test button it lights up Green but still no sound.
View 3 RepliesSince the Nov update I only get sound from my speakers. When I choose "AMD HDMI Output" (for head phones ) and set default nothing happens. All worked fine prior to update. AMD drivers are up to date.
Headphones are connected to the rear of Asus Display.
I installed Windows 10 last week and have been using it with mainly no problems (apart from my DVD/CD drive not working, which I posted a thread here about but haven't received any responses yet ).When I am visiting my family back home in England I often plug my laptop into the tv to watch films with the kids through the HDMI port. I usually have to change the "default" audio device to the AMD HDMI Output to do this, and then change it back afterwards. I did this once with no problems.
However, the last time I watched something I didn't change it back before shutting down. And now my "Internal Speakers" device has disappeared. I tried uninstalling all drivers relating to sound devices in device manager and doing a scan for changes - the HD Audio device reappeared, but still no "internal speakers" option. I tried checking "show disabled devices" in the "playback devices" window, still no joy. I uninstalled everything again and used the drivers from the ASUS support page for my model laptop (ASUS x53z) and still nothing
I installed the updated sound drivers from AMD in the sticky post here. Again, nothing but the HDMI audio option. This is frustrating as I live abroad and my laptop is my main method of both communicating home and watching media. I can't use my headphones now.I have considered doing a System Restore, but crazily the only System restore point available is from when some automatic updates were installed after the issue appeared. My only option is to do a System Reset, losing all my applications, but i'm not convinced this will solve the issue. I have noticed that there is one device showing that it is unable to start in device manager.
In windows 7, when headphones were plugged into the jack on the front of the machine it would automatically switch to the headphones and mute the speakers. If you unplugged them, it would enable the speakers. How would I go about enabling this on Windows 10?
View 2 RepliesI have a combined mic and speakers jack and also a combined input, but my microphone isn't working. it's just using my pc mic.
View 2 RepliesI wanted to temporarily disable my built-in speakers.I went to Control Panel.
Clicked on "Sound" which displayed my menu of playback devices.
Clicked on my built-in speakers.
Clicked on "Properties."
Clicked on "Disable."
However this removed my speakers entirely from the menu and I can no longer use them!How do I restore them?I went to my Device Manager and the drivers are still loaded.
So after my problems with my Altec Lansing speakers (detailed on another thread) I decided to bite the bullet and just buy new speakers. Except that now there is a problem with that too.
I have a HDMI cable attached to my laptop so that I can use my TV as a second monitor. That's fine and dandy, except that the sound only comes out from my TV, not from my laptop speakers or my new speakers. I've tried to use Windows settings to adjust things but there doesn't seem to be any such option.
On my last computer all I had to do was plug and play, so I'm not sure why this is happening. It's quite a hassle because when the HDMI cable is attached, all my sound comes from the TV.
I recently updated to Win 10, and the first thing I noticed was that the sound settings were weird. Both speakers and headphone sounds work perfectly fine, but they don't automatically switch when I plug/unplug the headphones. I have to manually go into sound and set one device or another to default.
View 9 RepliesI have a Dell Latitude E6520 running Windows 10 Pro x64. When I try to watch YouTube I get no audio. Spotify plays and gives no errors but doesn't have sound. When I plug in headphone sound plays but as communications headphones.
When I try to play a test sound through Speakers/Headphones I get an error that says "Failed to play test tone." When I try to troubleshoot it can't identify the problem. I have attached the report from troubleshooting.
I just bought a HP Stream x360 yesterday and upgraded it to Windows 10, the issue is that the touchscreen will no longer work. It worked with 8.1 but not with 10. I have checked with Windows Update and installed all of the updates. I have also checked with the HP driver support to see if any needed to be installed and it said none (if I did it right).
View 9 RepliesSo last time I Disabled the head phones in the Sound>Playback device list and after that I couldn't see them on this list anymore (Even when checking Show Disabled Devices) I already tried Updating the Driver in Device Manager>Sound,Video and Game controllers>(HeadPhones)>Properties>Driver and it still didn't work , I also tried Re-Installing them from computer and Restarting the Computer and nothing worked. I don't have any panel jack Disable front detection option in Realtek HD Audio Manager
I'm on Toshiba Laptop, Windows 10 and using Logitech G930 HeadSet. No hedphones nor microphone are enabled , and i can not change it.
I recently upgraded from windows 7 to windows 10. My mouse worked fine in windows 7, but it does not work in windows 10. Without my mouse to work with, I am lost on the computer.
Information from the Control Panel (System) is as follows:
HP pavilion dv5 notebooselectk PC , windows 10 Home , 64-bit operating system .
The mouse that I have is a Rocketfish Nano Laptop Optical Mouse.
Information from the Control Panel (Harware and Sound) (Devises and Printers) shows an icon
of the RF Nano Laptop Optical Mouse.
When I select the icon , there is information at the bottom of the page that reads:
RF Nano Laptop Optical Mouse Status: Driver error
Model: Rf Nano Laptop Optic...
Category: Mouse
Status: Needs troubleshooting
More info from the Control Panel (Hardware and Sound) (Devises and Printers) is taken from the Mouse link.
The (Hardware tab) in the Mouse link shows two different types of mouse.
One is a Pluralinput Mouse 0.8.2.0 and the other is a Synaptics P/S2 Port Touch Pad.
The Pluralinput information reads:
Manufacturer : Pluralinput
Location : on RF Nano Laptop Optical Mouse
Devise status : This devise cannot start (Code 10)
I was trying to add a printer and I had the message that the printer spooler don't work! I tried 3 different ways manually via command prompt and via windows devices system and force start automatically but nothing. it cant start. Some messages i got trying to fix it it was there are no resources for this operation!
View 1 RepliesI have an Acer Aspire V17 Nitro laptop (i7, 16 Gb RAM) which I am using with an external monitor (through the built-in HDMI port).
I recently purchased a USB to HDMI converter so that I could have a second external monitor. This was advertised as being applicable for Windows 7 and 8.1 systems so I figured it should work for Windows 10 also.
Unfortunately when I installed the software, the system crashed. Eventually I managed to restore it to an earlier point so I managed to get the system back to normal. However I cannot seem to be able to find any way of getting this device to work on my laptop. I tried allowing Windows to find the best driver, and even tried a third-party driver that I found on the internet but to no avail.
When I contacted the supplier he said that he had written to his own supplier about this but got no reply, so he offered me half of what I had paid for it as a refund. I accepted this but would really like to be able to use the device.