ever since I had a new hard drive installed on my Toshiba Satellite I cannot make a connection to my printer. I was on Epson Tech support for almost 3 hours, and they told me the printer is fine, and I am connected to it, but there is something blocking the print job from going to the printer.
I forgot to mention that when they installed the hard drive, they upgraded my wind. 7 to Wind. 10.
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 Repliesi've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
Since changing to W10 I am unable to install the above on my lap top, both worked fine on my old vista machine, little notice comes saying something like ..incompatable with the O.S, is there away to get around this ?
The printer, an Epson DX4400 is a few years old I know, but it is still very good and I dont really want to get rid of it.
I have a Toshiba X500-10T laptop with bluetooth not pairing with HP 460wbt printer.
Manage bluetooth devices finds printer but when I click to pair after some time the printer disappears with the following message.
I recently bought a new laptop with Windows 10. My previous laptop had Windows 7 and worked very well with my Brother MFC-J475DW Wireless Printer. I tried installing the driver for the printer from the original disk that came with the printer on the W10 laptop several times and kept getting a message that there is no printer. I went to the Brother website and downloaded the latest version of the driver and still get the same message. After some research I tried for the "built in" drivers, but with no success.
View 5 RepliesMy Epson SX115 printer is not working today, it is the first time i have used it since installing Windows 10. I have tried uninstalling & reinstalling the printer but it makes no difference. I am having lots of problems with my laptop since installing Windows 10.
View 1 RepliesI am unable to print wirelessly with my Epson 545 Series printer. Works fine with old laptop Windows 7 but Win. 10 is having a problem.
View 1 RepliesI was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically
[Code]......
Yesterday I downloaded Windows 10 on my wife's laptop and she immediately lost access to my Brother MFC-8500 printer which she was previously accessing though a wireless network and a router. The Brother is hardwired to the desktop, which was also upgraded to Windows 10, with a USB cord and is listed under printers on the desktop as "Brother MFC-8500 USB." Could you give me the procedure and the syntax for making this printer accessible once again to the laptop? If the syntax requires the desktop's IP address, could you tell me how to find it because the tutorials on the Web still talk about the Control Panel which seems to have been replaced with "Settings."
View 6 RepliesI have two Windows 10 Pro x64 machines - say, A and B - connected into a home network. Both machines have two interactive user accounts registered on them: Admin (member of Administrators) and Bob (member of Users). On both machines user names are exactly the same and account passwords are exactly the same.I don't use HomeGroup file sharing, all sharing is set up using accounts and passwords. Everything works fine with folder sharing.
Now I would like to share a printer. The printer is connected to machine A. I enable sharing for that device and give it share name HP. I also go to the printer security settings and enable everything for Administrators and Users.Now I go to machine B. First, I log in as Admin. I go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. At some point I have to enter the name of the printer, so I enter AHP. Without asking for any credentials Windows successfully connects to the remote printer, installs drivers, prints the test page etc. The remote printer appears in Devices and Printers. Everything works as it should.
Then I log out from Admin and log in as Bob on the very same machine B. The first thing that I notice is that for Bob the new printer does not exist in Devices and Printers. This is probably OK, since access to shared network resources depends on per-user credentials.
So, I attempt to "install" this printer for Bob as well. I repeat the same procedure from scratch. this time as Bob: go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. Again, at some point I have to enter the name of the printer, so I enter AHP. However, Windows suddenly asks me for credentials to connect to the printer. If I enter Bob's user name and password, Windows refuses connect to the printer, claiming that Bob does not have permission to access it. End of story.
Note that I can work around this problem: I can enter Admin's user name and password when installing the printer for Bob and ask Windows to remember these credentials. Everything will work fine after that, which means that Bob will access that printer as Admin.I don't want to give Bob credentials of Admin to access the network printer. I want Bob to access that printer under Bob's credentials. It works perfectly fine for file sharing. How come it doesn't work for printer sharing?
Upgraded a client's Windows 8.1 machine to Windows 10 Pro today and it's now unable to "see" the HP OfficeJet 6600 wireless printer directly behind it. I've assigned the printer a static IP address and I CAN ping it AND print to it from a wireless computer in the back office. However, I can NOT either ping it or print to it from the front computer. The Add Printer wizard never sees it either.
The computer has both a wired Ethernet and a wireless adapter. Both are enabled and show up in IPCONFIG.
Windows states that my Lexmark wireless printer is offline yet I can print from other computers in the house not running Windows 10 ... Model X4650 ....
View 1 RepliesIt seems that since Windows 10 my hp new laptop will not print to my wireless (old?) hp 6500 709n all in one printer..
View 11 RepliesThe issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.
Steps taken:
* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this.
* Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.
I've been experimenting with Windows 10 using a VM (VirtualBox) before upgrading. One challenge has been to see if I could get my old 1999 Epson Perfection 1200 scanner working in Windows 10 since Epson do not provide any 64 bit drivers.
I discovered you can use the Epson 64 bit drivers for the Perfection 2400 and they work fine with the Perfection 1200. The Epson Scan program is fully functional for normal reflective scans and film scanning (if you have the attachment). The built in Windows scan program also works. This fix also works in Windows 8.
Here is how to do it:
Download and install the Perfection 2400U drivers from Epson USA, version 3.04A [URL] ....
Connect and turn on your scanner
Run Device Manager
The Perfection 1200U will be shown under under Other Devices
Select Update Driver
Choose 'Browse my computer for driver software"Choose 'Let me pick from a list of device drivers on my computer'
UNCHECK the 'Show compatible hardware
'Click on 'Epson' in the Manufacturer box, and the scroll down through model until you find "Epson Perfection 2400', and choose that, and press Next
Ignore the 'Update Driver warning - choose 'Yes'; to continue to install.The Perfection 2400 will now be shown in Device Manager. Note that the Perfection 1200 will still be shown under Devices & Printers
Run Epson Scan and test the scanner. You may need to log out and log in again for program to work
The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.
It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.
However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to work.
So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.
I've repeatedly attempted this, but always get "An error occurred during setup. Restart your computer, then run setup again". This is an all too typical message you can find associated with many Epson products.
I've tried:
-Clean boot
-Safe mode (install enabled)
-Using an Epson removal tool I finally obtained after my 5th chat with Epson.
-An Epson fix deleting temp folder and looking for setup.exe that never appeared.
-Manually removing all Epson folders and registry entries I can find.
-Disabling firewall and AV
The same CD installed ok on my 6 year-old laptop (both run Windows x64).
I've run SFC /Scannow - ok
At best, the scanner is recognised as being connected when plugged in, and appears with a yellow trangle under 'Other Devices' in Device Manager.
I have an Epsom RX560 (Printer/Scanner/Copier)
When Connected to Windows 10, it recognised the Printer straight away.
No need for the Install disk, it was up and running in just a couple of minutes and even without the install disk the results are picture perfect.
Is there somewhere in Windows 10 where it would recognise the Scanner instead of the Printer, or would I have to use the Install disk.
When I connect my USB card reader which is a Q7S card reader. Which is this one here [URL].....
When I connect it ti my computer it stops working and in device manager it says Device Descriptor Request Failed and gets a code 43.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 RepliesOn installing Win !0 there was no wireless function, but win 10 initialised the card however when the laptop sleeps the card drops out and it has to be reset every time the card is Intel(R) Pro/Wireless 3945ABG. If the laptop is kept awake there is no problem
View 5 RepliesI recently upgraded from windows 7 to windows 10. My mouse worked fine in windows 7, but it does not work in windows 10. Without my mouse to work with, I am lost on the computer.
Information from the Control Panel (System) is as follows:
HP pavilion dv5 notebooselectk PC , windows 10 Home , 64-bit operating system .
The mouse that I have is a Rocketfish Nano Laptop Optical Mouse.
Information from the Control Panel (Harware and Sound) (Devises and Printers) shows an icon
of the RF Nano Laptop Optical Mouse.
When I select the icon , there is information at the bottom of the page that reads:
RF Nano Laptop Optical Mouse Status: Driver error
Model: Rf Nano Laptop Optic...
Category: Mouse
Status: Needs troubleshooting
More info from the Control Panel (Hardware and Sound) (Devises and Printers) is taken from the Mouse link.
The (Hardware tab) in the Mouse link shows two different types of mouse.
One is a Pluralinput Mouse 0.8.2.0 and the other is a Synaptics P/S2 Port Touch Pad.
The Pluralinput information reads:
Manufacturer : Pluralinput
Location : on RF Nano Laptop Optical Mouse
Devise status : This devise cannot start (Code 10)
I've had a Logitech M510 mouse for about a month and time is running out on a return. My problem is jerky and intermittent movement problems. These may have a workaround my using a USB extension cable since moving the receiver away from USB 3.0 ports may eliminate the interference.
I'm thinking of returning the mouse tomorrow before the return term expires. Are there mice that do not exhibit the 3.0 interference or is this simply a technology impediment to using wireless mouce?
I got onto my computer this morning and noticed that it had rebooted. Figured out it updated the latest patch. However, from that point on, I haven't been able to get anything from my computer. Wireless won't work, can connect to any bluetooth device, and none of my USB thumb drives will show up. I have tried logging back out, as well as rebooting. Nothing seems to be working. Since I can't connect to anything, I can't update any drivers (writing this on my mac... )
I tried uninstalling the patch, and it won't. Just spins. Tried to do a system restore, but it won't open up the dialog to allow me to choose. Tried to do diagnostics on the wireless driver and it just hangs. I have to shut it down.
I recently bought an HP 2540 wireless printer that is Windows 8 and 10 compatible. I setup the computer, used disk for the Win8 and downloaded the Win10 driver and installed on the second laptop. Both Asus laptops printed and then quit.I have reinstalled printer, run every diagnostic I can find and still cannot get either to print.
View 2 Replies