Drivers/Hardware :: Corsair H100 Random RPM Boost And Turns Off
Feb 10, 2016
i have a corsair h100 from 2012 that has been acting weirdly. it randomly boosts itself high rpm then back to normal and sometimes turns itself off. i have to shut down my computer then start it for the h100 to turn on again.
i've checked the wires and im sure they are fine. since a restart does not make the h100 to turn on again.
is this normal wear and tear on something like a processor cooler that is 4 years old? should i rma if the warranty still active?
View 1 Replies
Similar Messages:
Oct 4, 2015
I have the Corsair RM1000i, and the Corsair H110i GT. Individually they work in corsair link, but I just mounted both with the USB-cable, and when I open Corsair Link, I can't change anything with the H110i GT, and the power-usage thing for the RM1000i is stuck, it does not work.
View 1 Replies
Jul 30, 2015
I was installing everything with relative ease so I left my computer unattended. When I came back, the computer had restarted and sounded fine except there was no video output. (I aIso couldn't hear the hard drive spinning), thinking this was normal, let it sit for about 3 hours before I got suspicious. So I tried all of the available video ports (except displayport) and none of them had a signal. I let it sit for about 2 more hours, still, nothing. So I tried turning it of and back on again. Still, nothing.
View 1 Replies
Sep 13, 2015
So I was in my bios and I changed my CPU mode offset sign from + to -, I saved the settings and exited. When the PC restarted it came on perfectly fine but I am getting no signal on my monitor and my razer keyboard & mouse aren't coming on or lighting up.
My motherboard is a P8Z77-V LX
My CPU is a Intel Core i5 3470 3.20Ghz.
My RAM is G.Skill RipJawz 1866mhz 4 X 4
My GPU: Asus GeForce 660ti DirectCU II OC Edition.
I googled around and it said to take the battery out for 10 seconds and put it back in, I did that and no change, I also took the jumper from 1-2 and put it on 2-3 for 10 seconds then back again, Again no change.
Ive reseated the RAM/GPU and CPU and nothing seems to be working.
The pc turns on fine but nothing seems to be working.
Even my Corsair H80i pump LED changed from white to pink which is the colour I set it. All fans are working too.
Why I changed my cpu offset mode, Before this issue I just had a bluescreen for WHEA_Uncorrectable_Error, I turned my PC back on and I googled around and it said it was something to do with my CPU voltage, and one person suggested to try and change it from + or auto to -, So I restarted my PC and changed the cpu offset mode from + to -, after that it doesnt seem to be working and im not quite sure why.
What I can do to try and solve this issue or should I just order a new motherboard?
View 9 Replies
Jan 27, 2016
Recently I have wired to screens up as dual screens, they were working fine at day 1 but after the left screen (main monitor) has started turning itself off completely.
As soon as I boot, the screen goes black and I am greeted with the screen startup logo, then "no signal detected" Windows will only pick up the one screen (right monitor) until I restart the screen from the plug. My main monitor is connected via HDMI from the GPU into the screen, and the other DVI to HDMI adapter, again from the GPU, The weird thing is no matter what I try, it will always be the left screen, I have tried:
Swapping the screen over with another
Changing plug sockets,
System Refresh
Swapping screen power supplies
installing drivers
swapping HDMI cables
I can only assume it's something to do with Windows, but what is it?
View 3 Replies
Oct 3, 2015
So, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
DESKTOP-CS4PJG9-Sat_10_03_2015_121137_66.zip
View 6 Replies
Feb 10, 2016
Since yesterday im having this issue, my mouse starts lagging and beeping and i cant do anything else at the pc, the keyboard still works but if i turn the pc off or try to restart nothing happens, i need to to press the reset button
Is something like this video i found at internet [URL].....
I don`t know if is realted but yesterday i installed the new update at windows update My windows version is the 1511 (10586.122) and my mouse is a Corsair M65 RGB.
View 9 Replies
Jul 30, 2015
No matter what I do, eventually Windows 10 hangs and never recovers, forcing me to do a hard reset. Sometimes open programs will continue to let me use them, other times not. The Start menu does not respond, however, and any new instances of any programs I try to start never actually load. There is no consistent trend to it at all. At first I thought it was a dying hard drive, but the drive is fine and the problem happens even when it's not being accessed. Then I thought it might be my USB WiFi adapter, but it's working fine as well.
I thought it might be the "the last USB device installed isn't working" notice that keeps coming up (which is amazingly unuseful since I didn't install any new USB devices) and disabled the offending USB port in Device Manager, but that did not stop it either. Windows Update has been completely useless for this as well. The last system hang I experienced happened not even 10 minutes after booting the system up.
View 5 Replies
Jan 16, 2016
my computer will always randomly freeze for 1-3 seconds when I do normal tasks (like using chrome and skype). The freezes cause audio and mouse to also freeze during that time.
I tried to swap CPUs, get a new mobo, use different RAM and nothing works. I've got this problem since Windows 8. But its been progressively worse. Now I also sometimes have problems POSTing and the display will turn black when I boot up to the login screen.
I used latencymon to check which drivers are causing the problem and when I disable my GPU drivers the stuttering is gone. I don't have any of these problems when using DirectX apps. My GTX 660 has the latest drivers installed.
View 7 Replies
Mar 5, 2016
Every time I turned my PC on it would stay on for a few seconds then reboot, no BIOS screen or anything showed, I finally got it to work and it said my BIOS was corrupt and it gave me an option to retrieve a backup, which I did and then it started working, it then came up with "Windows can't start up" it gave me recovery options, I tried system restore, no luck, I then completely wiped my PC and reinstalled everything through the recovery, it turned on, every thing was fine.I then turned it off to plug in all of my cables and when I plugged the power cord in, it started the same thing except now it turns on then INSTANTLY boots up again and it continuously loops until I turn it off.
View 2 Replies
Nov 30, 2015
Ever since I installed Win10 the monitor has been turning on by itself between 3 and 5 am every night, or 3 minutes after login after a reboot if it is off at the time. Except on days immediately after a noticeable win10 patch. It is turned off physically, not by the system. Only having the system off or unplugging the monitor prevents it from turning on.
I have set my system to check for updates at 10am but that does not seem to affect the problem at all. I have tried looking through the event viewer for items at the time its happening but haven't found a good tool to sort by time.
View 9 Replies
Aug 1, 2015
This happened sometimes in Windows 8.1 and still happens in Windows 10. I went into settings and changed when to turn off monitor to never and put this computer to sleep to never so why does the monitor turn off after no activity anyway?
View 1 Replies
Aug 16, 2015
So when I go somewhere, like today, I sleep my computer until I get back. Lately it has been turning back on after a while sleeping. Today I left the house around 8:45am and slept the PC. I got back at around 12:30pm and the computer was on. I do not have Intel Smart Connect installed.
View 5 Replies
Sep 28, 2015
I've installed the latest insider on my desktop as it works fine on the netbook, and now the screen turns off after the boot screen, the computer doesn't hang and seems to show signs of working (HDD light flashing). The video card is OK. Once the screen came up after plugging a USB drive, and once the computer booted normally with screen, but now it doesn't.
View 5 Replies
Jul 31, 2015
I've just upgraded my win 7 installation to win 10. The power and sleep setting was carried over, turn off screen after 5 minutes, but the monitors stay on forever. I checked the network adapters in the device manager (BT personal area network, BT RFCOMM, Realtek PCIe GBE family controller) but none of them had power options or anything related to waking up the computer.
View 2 Replies
Dec 1, 2015
I have recently upgraded to windows 10 pro from windows 7 and prior to this i have been getting BSOD and it turned out to be a faulty ram which i replaced. Now my pc runs with two different brand rams bu have same spec, ddr2 2GB 800.
anyway I have my pc connected to the 60 inch tv in our lounge and I have been getting this problem for a week now. My tv would suddenly lose signal and after 5 seconds the computer turns off. It's not a BSOD or instant shut down. This happens once or twice a day. When i turn the pc back on the lights on the pc turn on but then about 5 to 10 seconds after it shuts down again (still no signal on tv). After i turn it on a second time it turns on fine with signal coming back on instantly. This happens everytime (i have to turn the power on twice to have it actually come on and let the first time turn itself off).
I have checked the temp and its perfectly normal. I dont play games on it, just watch youtube or movies etc.
Could it be the new RAM? I haven't tried taking it out but my pc was fine up until last week (its been atleast 3 weeks since i've upgraded).
edit: only setting i remember changing is the display setting. "change the size of text, app, and other items: 150%(recommended)" this to 100%. the settings to this changes randomly after the restart or on normal boot. sometimes when i boot its on 150% even after changing it to 100% the day before. and after several hours pc would turn off and when i turn on again its on 100%.
View 1 Replies
Jun 13, 2015
Windows button in Windows 10 turns red and will not respond
View 4 Replies
Sep 19, 2015
This browser periodically turns on itself, and the pages are advertising. Is there a way to do it?
View 1 Replies
Aug 31, 2015
I'm using a Packard Bell Easy Note TE Laptop (forgot the actual model number), upgraded from window 7 to Win10. After 30 minutes from logging in, the screen turns off regardless of whether I'm using it or not and brings me to the log in screen, just as if I put it to sleep or something.. It doesn't seem to matter if it's plugged in or not and it doesn't matter what I do in the power settings.
View 4 Replies
Nov 22, 2015
It turned on from a complete shut down.
View 1 Replies
Sep 11, 2015
I used to have screen-saver set as 'none' and 'on resume, display logon screen', and set the time there the same as the 'display off' option in 'power options'. And that works fine on a PC, no issues there.
Now I started using a laptop, and it has different 'display off' times for 'when plugged' and 'when unplugged', and different display off times for different 'power plans', so I can't use that trick any more.
View 9 Replies
Aug 17, 2015
The title says it all. When I put the computer to sleep, every few hours it turns back on. I cannot seem to find the problem in any power option. I made sure that my drivers do not wake up my computer in sleep.
View 3 Replies
Sep 18, 2015
I'm running Windows 10 64-bit and whenever i right click on desktop the screen turns black. Check out video for more details(The video is in windows 8.1 but the problem is the same and still persists).
View 8 Replies
Sep 21, 2015
I have freshly formatted my computer, installed all the updates and drivers, I have also RMA'd my video card (which i thoroughly tested and found it works fine on other computers.) but I cant figure out why my screen goes black but the computer keeps running. I can hear my music still playing and I run a dual monitor setup but when my screen goes black both monitors keep bouncing around the "Analog / Digital" box and thats all i can see, i have tested the monitors on other computers and they work fine as well.
View 9 Replies
Dec 24, 2015
Ever since changing to Windows 10 I keep getting a low memory flash and then computer turns itself on and off and restarts how can I fix this problem?
View 1 Replies
Dec 31, 2015
Just some background information, I was tired of Windows Defender taking up 100% disk usage at startup with Antimalware Service Executable so I installed BitDefender in its place so I could get myself set up when I start up my computer without having to wait half an hour to an hour for anything (Even Task Manager or Ctrl+Alt+Delete Security Screen) to be running.Today I just turned on my computer and noticed that it froze after logging in. After about an hour of waiting, I shut it down using the power button and turning it back on, which is usually my last-resort method. I logged into my computer again and opened the Task Manager up to find that Antimalware Service Executable was taking up 100% disk usage again, which then enabled Windows to inform me that both of my AntiVirus programs had been turned off for whatever reason. I clicked on the notification and noticed Windows Defender had turned itself back on when I never disabled Bitdefender to begin with.
Right now I'm running a Malwarebytes scan and will run a system scan with Bitdefender as well, but I'm pretty sure that's not what caused the problem with my computer because I hadn't downloaded anything since my last scan which was around a week ago.My computer is running Windows 10 Home Edition x64 on an Intel i7-4500U Dual-Core clocked at 1.8+2.4GHz with 8GB DDR3 RAM and an Intel HD Graphics (4400) GPU.
View 7 Replies
