So it was working fine and then it got slow when putting things on it and then blah it wont let me open it. if i managed to get the attachment thingy right you the drive f: which is giving me the problems i tried to circle it in paint.
View 9 RepliesI am getting the above message when in plug an external HDD via USB. Checking this out forum I Have tried Chkdsk commands at cmd prompt:
chkdsk f: /r
chkfdsk /f f:
for both I get the same reply: "Type of file is NTFS. Unable to determine volume and version state"
This external HDD is my backup and I would like to get it back. If possible with data, if this is not possible just back so that I can re use it.
Running windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
View 5 RepliesI just moved from 64 bit Windows 7 to 10 so I backed everything on my 4TB Seagate Backup Plus external drive. I also have Carbonite so all is not lost if it comes to that. I made a base Image using Macrium Reflect that I still would like to get back though.
Anyway the drive was working fine until I remotely (from my chair downstairs) was doing things on my PC. I occasionally take over my computer remotely if I'm watching tv and remember I need to do something. So I was in the process of moving files from the Backup Plus to Windows 10 that's when the drive locked up. I went upstairs and got on my computer and found out Windows 10 was now not recognizing the Backup Plus. Rebooting didn't work so I shut the drive off overnight and plugged it back in today but now get "The file or directory is corrupted and unreadable".
Disk Management shows ok and I ran Seagate's SeaTools for Windows in "Short Drive Self Test" mode and it also shows 'Pass".
I tried Recuva and a scan showed a lot of files but I'm not exactly sure how to use this... I set option to scan for undeleted files. I then made a folder on my C drive desktop to dump everything but then it says "These file names are too long to be recovered to the selected destination (634). Do you want to change the destination folder." Anyway so where is it wanting me to put everything?
What are the steps (and software) I should be doing to (1) recover my files and (2) what I need to do to use the Backup Plus drive again.
Text on the desktop icons is hard to read. When I open anything else, like Chrome, Outlook, etc., the text is so light and broken that it is unreadable. I have a 2006 17" Dell monitor and an emachines desktop. Everything was sharp and clear on Windows 7.
View 7 RepliesI was getting a random reboot about once every 36 hours, this is the 1st time I got a BSOD before rebooting
All I was doing when the BSOD hit was listening to music using Spotify
I've replaced the power supply and reinstalled windows. I also ran Memtest86+ no issues reported
DESKTOP-K4P77GV-Thu_12_17_2015__14648_04.zip
My computer was working fine with Windows 10... but has developed a BSOD issue. I can't think of any changes I've made/programs installed etc, though this is likely the cause. I've run SFC /Scannow along with dism.exe /online /cleanup-image /scanhealth &dism.exe /online /cleanup-image /restorehealth
Everything says it's fine... but I'm still crashing. I've attached a copy of the file created as requested... but I'm very much at my wits end.
WINNIPEG-26_08_2015_190423_22.zip
When first running Scannow, it showed an issue with this file: MicrosoftEdgeSquare44x44.scale-125_contrast-white.png, which I have replaced with another version.
I have this BSOD while playing youtube.
crash dump file: C:WINDOWSmemory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x109 (0xA3A01F5A6788B6B1, 0x0, 0x4CA3D042862E2DA4, 0x101)
Error: CRITICAL_STRUCTURE_CORRUPTION
Bug check description: This indicates that the kernel has detected critical kernel code or data corruption.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
KELVIN-PC-Sun_09_08_2015_113755_86.zip
I've just installed a 3TB Toshiba hdwd130 and it's only showing as 1TB?
I've used 2TB disks before, but this is the first 3TB disk I've tried to use.
The disk controller on the MB is an RS880P.
I've checked and the drivers all appear to be the latest.
I had Windows 10 Enterprise on a ssd 480gb sandisk ultra II but It's corrupted, I can't even launch Windows or repair tools.
I've managed to run repair tools and get a command prompt, as diskpart says, my disk is on a raw partition now, and it shows the following:
Total space on disk: 448gb
Space available on disk: 448gb
I've read something that on raw filesystem Windows can't see the drive then I'm wondering, if diskparts says that the space available is the same tan total disk, does it mean that I've lost all my data? Is really important for me to recover the data.
I've installed Windows 10 on another drive, but the drive isn't recognized, not in diskpart, not in Windows explorer, and tried about 5-6 programs for recover data on raw disk/partition and none of them saw my disk.
The main question is if I lost all my data, because if not, I will give it to the shop for repair it.
I have a program that I wanted to install into my Win 10 Pro Machine (64 Bit) and have found that the disk can not be read by the DVD/CD-ROM Drive. I also tried it in another Windows 10 Computer (64 Bit) and it also can't read the disk.The disk worked fine under Windows 7, in both the same computers. The drive works as it reads other CD/DVD's.
The disk is good as it works perfect in an other Windows 7 (32 Bit) and Vista computers (32 Bit). Computer is up to date with builds etc.
Problem:
I have a 2TB seagate barracuda HDD that is not showing up in:
- disk management
- CMD -> diskpart -> list disk
It does show up in:
- device manager
- bios
- Intel rapid storage technology
Screenshots:
Specs:
CPU: I5 6500
Motherboard: GA-Z170XP-SLI
Windows 10
I also tried switching out cables and ports. Same results.
My old Windows XP Desktop stopped running 2 weeks ago, with a No OS Found error. Since then I've taken the hard drive out and connected it to my new Windows 10 desktop with a USB 2.0 to SATA Adapter. It does not show up in "My Computer", but is detected in Computer Management.
The drive's an old Western Digital WD2000 one, and started clicking (for a few seconds) as soon as I attached it to the PC w/the USB Adapter. The clicking stopped after that.
It shows up as "Disk 1, Unknown, with the amount of data on it (186.31 GB [out of 200]), and is Unallocated. I've already tried numerous utility and Data Recovery programs, such as Recuva, MiniTool Partition Wizard, EaseUS Data/Partition Recovery. No luck with these.
They were either not detected, or didn't find anything. MiniTool Partition Wizard said it's a "Bad Disk" I
Partition Find and Mount is still conducting a scan which has been going for the past 7 hours (35%).
BTW - I really can't leave the hard drive on for the night to conduct a long scan. It's been overheating, and I already have a large fan next to it to cool it down. It's not safe to leave this on for an extended period of time.
Only to find out I bought a USB 3.0 Adapter instead of a 2.0 my old XP supported when It still ran.
I just spent a long time trying to find the best answer for this and wanted to save people some time... this is specifically for Windows 10.(So, the answer is basically here: URL...Add a new "Multi String Value" called "TreatAsInternalPort" to HKEY_LOCAL_ MACHINE SYSTEM Current Control SetService sstorahciParametersDevice with the values "0|1|2|3|4|5|" (the | symbolizes a new line)(I had to reboot two (2) times before the changes took.)
I had to do this fix because BitLocker has different options specifically for fixed, local, internal drives as opposed to a USB drive or eSATA drive which is removable. Also, this gets rid of the "Eject" option in Windows 10 for mislabeled internal HDDs.This is what it looks like when storing the values into "TreatAsInternalPort":
It won't let us access the local disk and says we don't have permission. I am the only user. It won't let us save anything on that disk either. I have gotten all of the documents, videos, and pictures backed up so that's not an issue. We are really just trying to reset the computer with a fresh start but it wont let us.
Resetting the computer- This wouldn't let me because it said it had an error. I did this by holding shift while restarting and then troubleshooting from there. I've tried the option of saving files and also whiping the whole computer, both ways won't work.Booting in safe mode- it works but nothing has come out of doing anything in that mode.
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
View 3 RepliesI did something terrible to my tablet, I converted the partition from GPT to MBR in a desperate try to install windows 7.Now tablet is not reading any usb I plug in, and of course I cannot format disk again because it doesn't recognize anything, always booting at uefi shell.
View 7 RepliesOn every restart, I see this warning message:
Disk 1 has the same disk identifiers as one or more disks connected to the system. Go to Microsoft's support website [URL] .... and search for KB2983588 to resolve the issue.
This did not happen on Windows 8.1 and there were no changes to any of the disks except for the Windows 10 update.
I do have a lot of drives (8) and volumes (14). But I looked at each of the GUIDs and UniqueIds and did not see any duplicates.
The reference to KB2983588 was f no avail as it does not seem to apply to Windows 10, or at least using DISM to enable that feature does not work:
Dism /online /enable-feature:MultipathIo
Windows keeps putting my Canon printer in device manager under the disk drive. Also puts the printer under printers which is correct. Everytime I uninstall it from under the disk drive location.
It puts it back after a reboot. Also get dump files error on usb port, which the printer uses. Printer works fine, but it should not be put under the disk drive in device manager. only way to stop it, is to turn printer off, before I reboot.
I have a two laptops with Windows 10 x64. Recently I noticed new partition with next available letter. Size is 128mb and it can't be accessed. I checked in Disk Management but this partition is not listed there as per the below screen:
I used MiniTool Partition Wizard and managed to see details about this partition.
I tried Diskpart to remove Drive Letter but no luck:
This happened at the same time on my two HP laptops but not sure what could cause it. Maybe some Windows update? I do not remember installing any new apps. I would like to remove this disk from the list of available disks.
Somehow unintentionally I created a dynamic disk partition on what was my boot drive but is now intended to be my documents and pictures folder drive.
How do I get rid of the first dynamic partition and change it to a normal partition to store my 'Documents" & "Pictures" folders for the new Win 10 Pro drive C:
Windows (Drive C ) is running fine.
trying to set the default location for Pictures and Documents to the original (C) now drive (D)...want only 2 partitions when fixed - "Documents" and "Pictures"
After installing Win-10 with a Flash Drive, The Flash Drive no longer visible either in My PC Folder or in Disk Management Thought this was a Isolated incident, Apparently not as 2 other flash dives i have have also disappeared, Really strange as 1 of the flash drives is less then 2 weeks old, Tried to find them using CMD & Diskpart but noting visible there either .
Flash Drive 1 16GB - Kingston DataTraveler 2.0
Flash Drive 2 16GB - SanDisk Cruiser Blade 2.0
Flash Drive 3 8GB - Was a Gift Dont Know Make 2.0
My Motherboard is USB v3.0 (Incase u need this info)
I installed Windows 10 on a new PC, with OS on Samsung 950 PRO. For data disk, at this stage, I use a Samsung 840 PRO which I transferred from my old 8.1 PC.
The data disk now shows in diskmanagment 351MB unallocated space, and 119 GB NTFS Healthy (Primary Partition).
How can I reclaim the 351MB unallocated to get maximum capacity of the data disk?
Maybe this a standard case of repartitioning, but I am not familiar with that and do not know how to do it.
Is it advisable to leave some of the hard disk space, say 1 GB or 2GB or ...... unallocated. Is there any benefit or harm.
View 7 RepliesThere is no drive assigned. I wonder what it refers to? I've checked the registry but can't figure it out. How would I remove it?
View 1 RepliesI originally started with a HDD with windows installed on it and data in anther partition on the drive, then got a SSD and moved the windows partition onto it,
my drives and partitions look like this:
I'm not sure if to remove the old SYSTEM partition or not, and if the SSD needs one also, My boot is also a lot slower on windows 10