I'm going under Computer Management>Disk Management and have deleted a partition which gave me the unallocated 48gb, and I'm trying to add that unallocated space to the main drive (C), and it's not letting me, When I right the C drive there is only a shrink volume option, the extended volume is shaded gray.
I have windows 10, not 8. I'll attach a picture. Dropbox - issue.png
So my C: Drive has been acting up lately, with barely enough space to stay alive. I tried to take some space off the D: Drive, which has 240 GB of unused space, and add it to the C: Drive using Disk Management. But when I shrink the D: Drive and Right Click on C: Drive the Extend Volume button is Greyed Out! I think this is happening because the Free Space is not adjacent to the C: Drive.
View 6 RepliesI cannot extend my c drive to take this unallocated space of 651MB? How do i do it?
View 9 RepliesI have a 120 gig solid state hard drive, that I have my OS installed on (Windows 10)
I was going to install windows 7 on a second partition on that hard drive, so I shrank the current partition and it gave me unallocated space.
I had a few people tell me it wasn't possible to install windows 7 on the same hard drive as windows 10... for some reason or another.
So I decided to expand the partition back to its original size (the whole hard drive).
Before I shrunk the partition.. I had 60 gigs left, I shrunk it by 20 to install windows 7 on.
Well after some people told me it wouldn't work. I decide to re-expand the partition to take back up the whole drive.
Problem is, when I did that.. I loss that 20 gigs, it says that 20 gigs is 'used' space now. I tried scanning the hard drive for errors and defragging (won't let me defrag that drive.. I assume cause its either a solid state drive or the windows drive)
I don't know how to get that lost 20 gigs back.
Until recently, I ran a dual boot system with Ubuntu - but for business reasons, I uninstalled it (along with it's bootloader). Anyway, I cleared up the hard drive space in the Disk Management app on windows 10, I have about 350GB free space from Ubuntu and I cannot extend the C: partition, you can see what I mean here
I can't seem to extend my partition and whatever program I use I have to buy the full version to extend my partition,
I have a 240gb SSD with Windows 10 installed. After selecting all the programs to determine the amount of space it should take I only saw 82gb yet I only have 44gb of free space left. At first it was only missing about 20gb of space which I thought would be a system restore point however now I'm actually running out of storage. What is taking up my hard drive space or how to determine it?
View 1 RepliesI have a HP Stream 11 laptop I bought from Walmart, it came with Windows 8.1 and I went through the charade of upgrading from 8.1 to 10 so it would validate they key and then I immediately did a clean install. Sadly with this laptop, it only has a 32 GB eMMC drive (non-upgrageable), when formatted it is brought down to 28 GB, after the clean install I was at 15 GB, I have installed very very few and rather lightweight applications that at most take up 1 GB. So left with 14 GB, what I have noticed since then... it seems as the updates rolls out, I'm starting to run out of space, I just did the "November 1511" update and I am now down to 5.75 GB free. Is there anything I can do to slim down Windows 10? or Should I just downgrade to a different OS?
View 3 RepliesI just bought my surface book. I am trying to partition my C Hard drive. I thought that I have to shrink it first, then create a partition. However, the shrink space allowed is only around 3 GB. My disk size is 512 GB.
I defragmented (or now called optimized) the C drive and retried it, but no use. I would like to create a new drive call it D, and leave C for windows only.
Something is causing my C-drive to completely run out of space. I did some investigation and found a folder under AppDataLocalPackages. The folder was called windows_ie_ac_001 and it is about 36Gbs. I deleted it. The strange thing is that after I restart my computer, you can literally watch my hard drive fill up back to the 36Gbs. The folder I deleted is back too and if you go to its properties, it's increasing in size so I know it's the culprit.
Doing some more investigation I found out this problem folder is for a stupid programmed called AVG Web Tuneup. I tried to delete the program in Uninstall/Install and it won't work.
Attached Files : Example.jpg 106.29KB
Is it advisable to leave some of the hard disk space, say 1 GB or 2GB or ...... unallocated. Is there any benefit or harm.
View 7 RepliesI keep getting a message that my d drive has very little space. My computer is only 2 months old.
View 1 RepliesProblem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesI was installing Linux as second os and split my drive in partitions.
After 2 hours (and installing linux) I can't extend my primary drive into the space thats left. I right click and "extend" button is grey. i want my 100gb back.
In the past few days my external hard drive makes the sound (windows notification) like when I unplug it from my desktop. Then about 5 seconds later I get another sound and notification asking me how I would like to view content for G: (my external hard drive). I only have it attached to use for backups and I've checked my back up program (easeus) and my backups haven't been happening either. I used crystaldisk to check it and it's healthy. Why it would be essentially shutting itself off and on?
View 9 RepliesI was under the impression that I was going to have a hard drive failure and purchased a new hard drive and cloned windows to it. it turned out my drive is fine, so I would like to use the drive as a second drive in my system.
if I just plug it in, will my computer boot from the now C: drive or will it boot from the second drive, since it is a bootable drive?
Or can I plug it in after it booted up?
it is installed and the power is connected, but the data cable is not.
I gave my C: drive a name so I can find it in file manager and don't format the wrong drive when I plug in the second drive.
See Pictures, 'Local Disk E' appears twice at the side, not an issue, but I don't know why?
View 9 RepliesI have a Seagate HDD which has a really dumb APM setting. This makes it spin down and make extra noise.
In Windows 7, I managed to auto disable per session basis, but in Windows 10, this does not seem to work any more.
Are there any proven way to control APM settings in Windows 10? I really can figure it out.
"Your PC ran into a problem and needs to restart" This is the message I got when windows 10 stopped
working.. From that it said my computer has an unrepairable problem we will collect the information and restart it for you. It never did restart, so I tried with the windows 10 disk to use start-up repair.. and it told me that the hard drive was locked. So, I had no way to unlock it.. Long story made short. I had to take the hard drive out and hook it up to another computer that has windows 7 installed on it. And it let me unlock the drive, after which i put it back in the computer that it came out of, and it works just fine..
How is one supposed to unlock a hard drive, is there a program to do that? Or did I just luck out, by having another computer to hook it up to. ? I've had this happen on windows 10 more than once..
When I go to Defrag it will say I need to optimize my c drive, but when I do this it keeps coming back as 31% fragmented, I have 98.2 gb free of 192gb. It worked o.k. on W7 but will not work on W10.
View 2 RepliesMy old Windows XP Desktop stopped running 2 weeks ago, with a No OS Found error. Since then I've taken the hard drive out and connected it to my new Windows 10 desktop with a USB 2.0 to SATA Adapter. It does not show up in "My Computer", but is detected in Computer Management.
The drive's an old Western Digital WD2000 one, and started clicking (for a few seconds) as soon as I attached it to the PC w/the USB Adapter. The clicking stopped after that.
It shows up as "Disk 1, Unknown, with the amount of data on it (186.31 GB [out of 200]), and is Unallocated. I've already tried numerous utility and Data Recovery programs, such as Recuva, MiniTool Partition Wizard, EaseUS Data/Partition Recovery. No luck with these.
They were either not detected, or didn't find anything. MiniTool Partition Wizard said it's a "Bad Disk" I
Partition Find and Mount is still conducting a scan which has been going for the past 7 hours (35%).
BTW - I really can't leave the hard drive on for the night to conduct a long scan. It's been overheating, and I already have a large fan next to it to cool it down. It's not safe to leave this on for an extended period of time.
Only to find out I bought a USB 3.0 Adapter instead of a 2.0 my old XP supported when It still ran.
I have a 1TB external USB hard drive, it is not showing up in 'my computer' the light on the hard drive is constantly flashing and randomly beeps and clicks when first plugged in, I have never heard this until today..
I have tried it on two laptops, windows 7 and windows 10 and in a macbook, does not show up.
I have tried a different cable from another USB device, still no luck.
It appears in device manager which says it is running normally, I have tried un-installing and re-installing, no luck! In disk manager it says the disk is unknown and not initialized, see screenshot.
Reading other forums suggest trying Minitool partition wizard it comes up but as 0GB, screenshot
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
View 9 RepliesI have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
I purchased a 1TB hard drive to place media files on it so that I could plug it into my DVD player which has a USB port. I made sure to format the hard drive to Fat32. What I can surmise is that the 1TB hard drive is too big for the DVD player to read. I plug it in and it says Device Not Supported. But I've successfully plugged in an external card reader and used a 16GB SD card to place files on and it reads them fine. So I'm thinking it's the size of the drive that is the issue.
I might have to partition the hard drive into two partitions. One partition 16gb and then the other partition with whatever is left. They did say they were not sure if there was a way to set it up so the 16gb Partition is what is recognized first when plugged into the DVD player. This way I would transfer movies I want to watch to the 16 GB partition, and transfer them over.
Now when I search hard disk partitions in Windows 10 the manager comes up and I can see the hard drive, but I can not change the size to partition it. It's grayed out. Is there a freeware program that works with Windows 10 that will split the hard drive into two partitions in sizes I specify, and make sure that the 16GB partition is the first one loaded or seen? And if I set it up that way when I plug it into my computer will the computer see both partitions?
I'm trying to change the name of my External Hard Drive as it appears as Local Disk G on my laptop. However, upon trying multiple times it keeps on coming back as Local Disk G.
View 9 Replies