Drivers/Hardware :: Failed To Add Port Monitor HP
Oct 24, 2015
Bought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.
View 9 Replies
Similar Messages:
Aug 4, 2015
Lenovo USB port replicator to work with a DVI monitor attached? I can't get win 10 to recognize that another monitor is attached.
View 1 Replies
Aug 11, 2015
Every time I restart or boot up my PC with my monitors turned on first I always get a issue with the monitor connected to the HDMI port, it always says "Input not supported" and all I do is turn my monitor off then back on and the issue has been resolved...
GPU: GTX 650
View 3 Replies
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Jan 25, 2016
Ok so I have a wireless Bluetooth device. It has worked fine connected to a windows 7 and 8 computer. Now I am trying it on 10. For the software I wrote for it to work properly I need to be able to specify which COM port it uses when connecting.
In windows 7 and 8 I would then go to "Bluetooth settings", click "New Connection", and then follow the setup wizard. Here I would be able to set the device to be in Dev mode and specify the COM port to always use. In the new windows 10 "Bluetooth settings" program I can not find a way to do this.
Also I have two different "Bluetooth settings" programs show up in the start menu. One I can open up and it will show my device, but I am unable to do what I mentioned above. The other program with this name has the same icon as what is on my Windows 7 and 8 machines, but gives me the error "unable to start correctly (0xc000007b)"
View 1 Replies
Dec 13, 2015
I'm using a current Intel NUC (NUC5i3RYH) running Windows 10 Home x64.
I have this infuriating problem which may be related to the hardware but may also possibly be fixed in the OS. I've had no success so far changing power and sleep settings in the BIOS and Device Manager. I've had no luck with Intel directly.
The symptom is that any (of two different) USB TV tuners I use seems to lose the quality of signal anything from 20 minutes to an hour after I access that channel. If I change channel and then return straight back it instantly fixes it.
any registry or other settings I could try? Alternatively some utility or task I could use to poll or wakeup the port periodically? I'm just lost on this and have spent over a month off and on trying to work out ways of making it work.
View 6 Replies
Sep 29, 2015
I set up a wake-up alarm in the Computer management --> Task Scheduler that automatically plays a custom mp3 every morning at 7AM.The speaker is in my monitor and it goes sleep 10 min after idle. It's ok, I don't want to keep it turned on for whole nights. But, when the scheduled alarm comes, it does not automatically turn back on the monitor and therefore its speaker doesn't play the MP3 because the monitor remains in sleep.I tired various ways to make the alarm turn the monitor back on but failed.I just need my music file played as an alarm in the mornings.
View 1 Replies
Jan 31, 2016
I tested the internal HDD with CrystalDiskMark and was able to get 109 MBPS both on sequential read and write tests. Then, when I tested my 1 TB WD My Passport USB 3.0 External HDD with CrystalDiskMark the sequential read and write speed did not exceed 40 MBPS the few times I tried. Got similar 30-40 MBPS speed when transferring movies from external HDD to internal HDD.So far, I have tried updating the external HDD and USB 3.0 Controller drivers. Tried with 'USB selective suspend setting' disabled (Under Power Plan Options). Also tried with write caching enabled. But havent been able to solve the issue.My laptop is running Win 10 Home 64-Bit. I am sure I used the USB 3.0 port. And, I used the USB 3.0 cable supplied with the external HDD. I don't have another USB 3.0 device so cannot figure out whether the issue is with my laptop of the external HDD.'
View 4 Replies
Jan 19, 2016
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 Replies
Nov 26, 2015
When I install modem MMX310G 3G USB MANAGER in windows 10, it shows driver installation failed and when open this app it shows no devices.
View 2 Replies
Sep 21, 2015
I have a USB port on my motherboard that never worked. I had the problem with Windows 7 complaining about it, but something I did got Windows 7 to be quiet.
Now I have Windows 10.
Action Center is popping a steady stream - and I do mean steady - of "USB device not recognized."
Device Manager refreshes so often it is hard to right click on things because of the refreshing.
The item is listed as "Unknown USB Device (Device Descriptor Request Failed)." It alternates between these 2 error messages.
Device status: Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.
Device status: Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
A request for the USB device descriptor failed.
Here is my USB list:
Universal Serial Bus controllers
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
Intel(R) ICH10 Family USB Enhanced Host Controller - 3A34
[Code] .....
Things I have tried:
-I am using regular boot. I am not using quick boot.
-I have disabled the driver.
-I have uninstalled the driver.
-I have uninstalled all of the host controllers above and allowed them to reinstall.
-I have manually reinstalled all of the host controllers' drivers above (by using the default driver).
-I have turned off the PC and unplugged it.
Annoyance reduction:
In Sound, I have set Device Connect and Device Disconnect to no sound.
I have tried turning off Action Center notifications for all apps, but don't like doing that because that also prevents other notifications that I do want. Also, when I do that the old gray symbol for a device connection problem starts showing up in the notification area.
I have tried turning off Action Center notifications for all apps and then turning it right back on. The problem goes away for a few minutes.
View 1 Replies
Oct 22, 2015
I have a USB device (X.Vision PCDVB-3100) It work properly in Windows 8 and Windows 8.1 But now in Windows 10 when I connect it to USB port, The Windows give me this error:
Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.
How I can solve this problem?
View 4 Replies
Aug 4, 2015
if i try to install the latest windows 10 driver it says it fails, then if i try to uninstall my current ones it says it fails as well. what am i supposed to do, my other display wont get recognized and my main display is not running at 1080p.
View 1 Replies
Dec 11, 2015
I have a dual monitor setup. I have 2 AOC e2252V monitors that would work fine on Windows 7. I have all updated drivers. I've checked the internet for multiple solutions but everyone's problem seemed to be that they didnt extend their displays. My problem is that both windows 10 and my graphics card are not detecting it. They are both connected to the DVI-D connections on my MSI R9 390 graphics card (installed with the latest drivers from 11/30/2015 on the MSI website.) One monitor is hooked up from VGA through a DVI-D adapter to connect to my graphics card. I assumed this wasn't the problem because I did the same thing on my previous card where it worked just fine. I checked to see if one of my DVI-D connections were faulty on the card, but my one monitor hooked up directly through a DVI-D cable (no adapter) works on both of them. If I hook up my TV through HDMI connection, it will detect my TV. I wonder if this is a problem with Windows 10, MSI R9 390, or the adapter. [URL]
View 4 Replies
Feb 13, 2016
I'm having trouble to get picture on my main and only monitor when booting up. The green led indicator on the monitor is just flashing.
Usually I have to push the restart button 10-15 times until picture finally appears. Sometime I am able to log on in the dark. Hit space and logon, then do a win+p until picture appears.
I've tried to uninstall the drivers, but that didn't solve it. I had to use a different monitor to get in for the first time after that. Driver is the most recent one.
View 2 Replies
Jul 29, 2015
Fresh install of Windows 10 and the last driver I need to sort out is the above.
I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.
View 5 Replies
Dec 25, 2015
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.
View 9 Replies
Nov 9, 2015
for a month or so I have a samsung tv-monitor (27 TV monitor with the blue Touch of Colour (Black) (LT27D390EW/XU) | Support | SAMSUNG UK ) . Problem is that sometimes (rarely tbh -like once a day) the monitor reboots itself (the screen for 1 sec turns black in my next sec throws the Samsung logo and then it comes back to where it was before.
The monitor is connected to hdmi cable at 1080p resolution and I also have and an internal S / PDIF cable to get the sound passing from the motherboard to the gpu.
I sent the monitor to Samsung where they told me that this is a software problem that comes with windows 10 and that as far as they are concerned there is no solution to this other than reverting to windows 7. I had already installed windows 10.I have already tried installing the drivers that Samsung have on their site but it wont fix the problem.
View 4 Replies
Oct 17, 2015
I'm trying to tune a new AOC monitor, model E2250Swdn, as when plugged into my laptop I noticed that my taskbar on the new monitor appears to have less blue to it than is presented in the attached image below. looking at the screenshot here that I took on my laptop's screen of my taskbar, what adjustments I need to make to the monitor? is it color correction, gamma or brightness?
View 1 Replies
Jan 8, 2016
I just changed from DVI to HDMI and now when I shutdown my computer my monitor will not enter sleep mode, and will display 'Cable Not Connected' as shown in the image attached.
View 2 Replies
Oct 15, 2015
After installing Windows 10,for some reason I have no sound on my monitor speakers.I upgraded from Windows 7 where there were no problems.When I open Device Manager/ Audio inputs and outputs.click on speakers it says "this device is working properly".On trying the Test button it lights up Green but still no sound.
View 3 Replies
Aug 5, 2015
I have a Dell Latitude E6520 running Windows 10 Pro x64. When I try to watch YouTube I get no audio. Spotify plays and gives no errors but doesn't have sound. When I plug in headphone sound plays but as communications headphones.
When I try to play a test sound through Speakers/Headphones I get an error that says "Failed to play test tone." When I try to troubleshoot it can't identify the problem. I have attached the report from troubleshooting.
View 3 Replies
Aug 16, 2015
I have a two monitor set up, with my main monitor being a 27" screen and a second 22" touchscreen as a secondary monitor.
I can only get the touchscreen monitor to pick up touches if I make it my main monitor. As soon as I switch my main monitor back to my 27" monitor touches to the touchscreen monitor appear on 27" monitor.
View 3 Replies
Aug 18, 2015
just updated to windows ten with my Sony Vaio 14 touchscreen laptop. 2 things ive noticed so far that have been bugging me is 1. I cannot adjust my brightness with the f5 & f6 keys like i could before... nor do i know how to changed the brightness now at all. Also if not able to connect to an external display (i.e. monitor or TV) used to do it automatically with 8 now nothing.
View 1 Replies
Aug 11, 2015
No matter what I do Windows always labels my secondary TV screen as my PC screen and vice versa. It's not really a problem in terms of functionality but it does annoy me that I can't change it. I've been through countless televisions and GPU's over the years but it always remains so possibly there is a good reason for it?
Anyway, the 'issue' has been persistent since W7 (and possibly before?) but I'm wondering if there is now/or always has been a work around for this?
Edit: This post explains it better Changing monitor identities?
View 9 Replies
Jan 26, 2016
I've just bought a fancy new curved screen HD Samsung monitor, but can't get it to work with my Windows 10 PC. Samsung tell me that they haven't released a Windows 10 driver yet, but that it should work with the basic Windows 10 driver. It doesn't.
View 4 Replies
