After installing Windows 10,for some reason I have no sound on my monitor speakers.I upgraded from Windows 7 where there were no problems.When I open Device Manager/ Audio inputs and outputs.click on speakers it says "this device is working properly".On trying the Test button it lights up Green but still no sound.
View 3 RepliesSince the Nov update I only get sound from my speakers. When I choose "AMD HDMI Output" (for head phones ) and set default nothing happens. All worked fine prior to update. AMD drivers are up to date.
Headphones are connected to the rear of Asus Display.
I installed Windows 10 last week and have been using it with mainly no problems (apart from my DVD/CD drive not working, which I posted a thread here about but haven't received any responses yet ).When I am visiting my family back home in England I often plug my laptop into the tv to watch films with the kids through the HDMI port. I usually have to change the "default" audio device to the AMD HDMI Output to do this, and then change it back afterwards. I did this once with no problems.
However, the last time I watched something I didn't change it back before shutting down. And now my "Internal Speakers" device has disappeared. I tried uninstalling all drivers relating to sound devices in device manager and doing a scan for changes - the HD Audio device reappeared, but still no "internal speakers" option. I tried checking "show disabled devices" in the "playback devices" window, still no joy. I uninstalled everything again and used the drivers from the ASUS support page for my model laptop (ASUS x53z) and still nothing
I installed the updated sound drivers from AMD in the sticky post here. Again, nothing but the HDMI audio option. This is frustrating as I live abroad and my laptop is my main method of both communicating home and watching media. I can't use my headphones now.I have considered doing a System Restore, but crazily the only System restore point available is from when some automatic updates were installed after the issue appeared. My only option is to do a System Reset, losing all my applications, but i'm not convinced this will solve the issue. I have noticed that there is one device showing that it is unable to start in device manager.
I have a laptop - Asus GL551JW-DS71.
My speakers work fine but when I plug in my headphones, I can't hear any sound from the headphones. The headphones do work as I use them for my desktop.
I have tried updating the sound drivers from the device manager.
I have tried removing the drivers and redownloading the audio drivers from Acers website.
I have tried 'installing' audio driver with the default windows 10 audio driver instead of the realtek one.
I have tried adjusting the sample rate in the advanced properties tab.
What can I do to get sound working in my headphones again and not just the speakers.
So after my problems with my Altec Lansing speakers (detailed on another thread) I decided to bite the bullet and just buy new speakers. Except that now there is a problem with that too.
I have a HDMI cable attached to my laptop so that I can use my TV as a second monitor. That's fine and dandy, except that the sound only comes out from my TV, not from my laptop speakers or my new speakers. I've tried to use Windows settings to adjust things but there doesn't seem to be any such option.
On my last computer all I had to do was plug and play, so I'm not sure why this is happening. It's quite a hassle because when the HDMI cable is attached, all my sound comes from the TV.
Today when I plugged in my earphones (the apple ones) and there was no audio at all, but somehow it worked totally fine without the earphones. Even realtek detected something when I plugged my earphones, I also went to device manager to check if every driver is updated or not but still ended up no luck.
things i know:
- Audio is perfect without earphones plugged in
- only 'Speakers' is shown as my playback device
- went to device manager and i'm pretty sure all drivers are up to date and enabled
- everything was working fine the last time i booted into my windows10 (dual booting with linux)
- realtek detected my earphone as it popped up a notification saying 'you just plugged a device into the audio jack'
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.
Today I took the plunged into the windows 10 experience. Everything is great and all but my speakers that are plugged into my external monitor, via hdmi, aren't being recognized. I have confirmed that the speakers do still work, by testing them with my phone. My computer does sport an Realtek HD audio device. Windows says the drivers are up to date when checked with device manager for both.
I do know i can plug the speakers straight into my laptop, but the speaker wires aren't long enough to reach to that side of my laptop on my current set up. My external monitor is a g247hl, not that it should matter. plugged into that is a Logitech speaker system and a lenovo speaker system (through a slitter).
I just upgraded to Windows 10 a few days ago and ever since, I've been getting a random popping noise in my speakers. I have tried everything I can think of. I've updated my drivers and my Bios. (From HP site) I've uninstalled and reinstalled the audio (Realtek) driver. This problem never happened in Windows 8. I'm about to switch back to Windows 8.
View 3 RepliesLost sound in window10 my speakers work but no sound. hookups are good. I have new speaker no sound.
View 3 RepliesAfter upgrading from Windows 8.1 to Windows 10 my audio now plays through my headset and through my computers speakers.
FAQ:
-Have you updated your drivers: Yes I have.
-Have you set the headset as default device: Yes I have.
-What audio do you have: Ok, I not sure which one I have, but I can find VIA HD and on Windows 8.1 (not on Windows 10) I use to have Realtek audio manager which I have now lost.
-What headset do you have: Sennheiser G4ME ZERO.
On my headphone all works fine, but the sound through the integrated speakers is much lower. With some movies I can put the sound up to max and still its not loud enough.
View 3 RepliesI recently updated my Asus N55SF laptop to Windows 10. Everything is working, but the internal speakers in the laptop are not working. However, headphones and HDMI audio is working. I've tried the newest drivers from Microsoft and from the Realtek website. What I can do here?
View 2 RepliesAfter a successful upgrade from Windows 7 to Windows 10 I discovered that YouTube would not play. Fixed the video problem by running in compatibility mode .. BUT then noticed there was no sound from either speakers or headphones on my laptop. No Windows sounds, iTunes, nothing worked. Could this be a setting inadvertently turned "off' somewhere ? Up until I got YouTube working the sound was fine with Windows 10. I just don't know where to look to rectify this. Rebooting etc doesn't make any difference. I don't suspect a hardware fault, it must be an OS corruption or something.
View 3 RepliesI'm trying to make the In-game sounds and every other system sounds sound in the speaker, and the Skype/TS/Raidcall (i'm using raidcall) in the headset but i don't know how to make it. I know i can make the Raidcall sound in the headset in the configurations, but i don't know how to make Windows (win10) and every other sound to sound in the speakers. I'm using the Realtek audio (Gigabyte Z97-Gaming 5 MOBO).
View 1 RepliesI have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.
This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.
I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?
[URL] ....
I updated my computer to windows 10. when I upgraded and played audio, video on local computer or on any website. I could not hear music/ sound. when I play audio file through Windows Media Player, I get following error.
"Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
And when I play audio file using Groove Music. Can't play. We can' find an audio device for your PC Make sure headphones aor speakers are connected. For more infor search your PC for "Manage audio device".
0xc00d36fa ( 0xc00d36fa) |Close| (button).
When I go to manage audio device. I play test tone. and get message box saying that "failed to play test tone".
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
I know our Surface Pro 3 has a lower volume threshold when you listen via headphones or speakers. Put the volume at 100% and for some of us, the volume is not loud enough.
I plugged my Surface Pro 3 into my docking station which is then connected to my ASUS VG248QE (external monitor). The volume, in my opinion is not loud enough at 100%. I am not looking to wake up my neighbors but I am looking to listen to a movie/TV show loud enough where the AC noise does not get in the way or any external outside noise.
I originally upgraded 7 to 10 and ran that for about 3 weeks, some odd issues came up and decided to wipe out everything and reinstall 10 from the ISO. Well off topic for this question the wipe drive option on installing 10 did not delete anything from my hard drive for some reason, unless windows 10 makes folders with dates back to 2011 on install which is when I first got this computer.
But to my actual question during both the time I spent just upgraded and now with the system with a fresh install I seem to be randomly getting a beep at various times that I can not even use process monitor to track down, it shows no sound activity for mp3 or wav when I get this chime/beep.
I have gone through all sound settings and its none of the ones used, I also have gone through the media folder and played each file there and none match this sound. IF this was the old dos days I would call this a system beep from the PC speaker but its playing though the speakers external to the computer itself.Google has turned up similar issues but none that match software that I run...in the time it took me to type the first part of this line it went off twice, no notifications appear in the action center to go with it.
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
I just bought this sound card and installed drivers for Windows 10. (and a crapton of bloatware with UI of Win XP media player...)
Everything works well except one thing: when I change the sound (or mute) I don't see Windows 10 volume bar. I mean these:
The sound itself changes, but there is no indicator. Is there a way to fix that?
On my son's laptop, he has 2 playback devices, HD audio and speakers. If set to HD audio, no sound. If set to speakers, perfect. Problem is it won't stay set to speakers. Drivers are up to date. Its a Lenovo Carbon laptop (don't have exact model with me now). PC primarily used for gaming, mostly Steam.
View 3 RepliesI started up my laptop a while ago to play some music while I do work but when I plugged in my headphones there was no music. The music plays on the speakers but headphones nothing.... I have tried many headphones on my laptop and none worked but they do work on my iPod. I am using Asus Zen Book pro UX501, windows 10 64 bit....
View 2 RepliesI have a set of Z506 and I cant seem to get the two rear speakers to work.I double checked my work and still nothing. I already have windows setup to run in 5.1, and even there the two rears wont play a sound.
View 5 RepliesI just installed the most recent windows 10 tech preview last night; but my sound blaster pci express sound card did not get installed correctly or something because i am getting no sound at all. I roll everything back to the old setup.
View 9 Replies