Drivers/Hardware :: Hide Empty Drives
Oct 10, 2015I usually work with hidden files enabled, and would like to hide empty drives, but it seems my Win 10 Single Language doesn't have this feature, is this normal?
View 8 RepliesI usually work with hidden files enabled, and would like to hide empty drives, but it seems my Win 10 Single Language doesn't have this feature, is this normal?
View 8 RepliesI am having to use a windwos 8.1 AMD graphics driver because the AMD HD6320 series graphics still has no updated driver from AMD to support windows 10. The video freezes and goes green with the HD6320 driver. The win 8.1 driver works great except windows 10 keep updating and reinstalling the standard driver for the HD6320. I haven't found a way to hide an update in windows 10 like I could in windows 7.
View 9 RepliesI have Windows10 with dual monitors. When I start Windows the taskbar on Monitor 2 is visible and won't move. If I turn Cortana on and off it resumes auto-hiding but I have to do this every time I start Windows 10.
View 2 RepliesI need to hide my recovery partition but i'm using gpt. How to hide? The Set id only work in mbr mode ....
View 8 RepliesI just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
I have a Windows 7 PC with 3 DVD drives. Imgburn shows them as connected to 3 different SATA busses: [2:0:0], [3:0:0], and [4:0:0].
After upgrading to Windows 10, all of them ended up on the same bus, [2:0:0], like this:
Why did that change? I tried connecting them on different SATA plugs, but they are always shown on that [2:0:0] bus. The thing is, I really need them to be on different busses, because of a particular requirement of a legacy application I use.
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
View 1 RepliesWhy my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
View 3 RepliesI've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
So I have set up my SSD and using it for my OS (Win10) and my F drive (1TB HDD) as a drive for my programs and documents, however when I try to search for items vis Windows Start Menu it only shows items for my C drive, how to make it to search both drives for documents/files?
View 6 RepliesLately, every flash drive I've bought requires to be NTFS formatted. Quick formatting gives me the option to change allocation size. Is there a specific size I should be using or just go small?
View 4 RepliesI have several hard drives on my PCs; some are physical, some are partitions. In every PC I've upgraded, W10 marks these as RO. I go through the ritual of setting permissions to Full and marking RW, but occasionally a drive will revert to RO. I can't find a Take Ownership option for drives, only folders. Am I looking in the wrong place?
View 6 RepliesAfter I upgraded from Windows 7 Pro to Windows 10 Pro everything was fine on my desktop PC. Several days went by as I learned the new OS' interface. Then I got an update message telling me that a reboot was required for the updates to take effect. Blindly I went ahead and rebooted as requested. To my astonishment after I rebooted my two DVD drives were no longer recognized by Windows 10. Mind you, they were working just fine after my initial upgrade from 7 to 10.
I tried using the registry hacks I had seen on so many of these forums. None worked.
My only fix was to do a restore to a date & time previous to the update. (Just go to control panel, select recovery and then select open system restore.
Still checking out changes but most obvious is loss one of my drives. How to locate?
View 1 RepliesYesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
I did once manage to Partition in to 2 separate drives the Disk 2 - New Volume (G:) external drive
However I can not repeat that and instead I keep getting it split in to 3 partitions?
I only want 2 partitions 1 x 1TB + 1 x 2 TB
I am doing this on this system (Windows 10, 32 bit) Home edition, because my ACRONIS Total Image 2016 won't recognise a 3 TB drive.
BTW: I have two other registered Windows systems 1. Windows 10 Prof. & 2. Windows 7 Prof. both using 64 bit, that I don't have problems with.
Please see attched .jpeg image
I just upgraded from Windows 7 PRO to Windows 10. I notice that my external USB 3.0 drives can't be found. Before the upgrade it was ok. The only external device that does show is a Sandisk FIT USB 2.0 stick.
View 9 RepliesWhen I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
I've done a reinstall of Windows 10 today. I unplugged my internal storage HDD's to isolate the SSD for the install, wiped the SSD, and reinstalled 10.
Now it's installed, I've plugged my 2 internal HDD's back in, started up Windows, and neither drives are showing. Neither in device manager or in Explorer. What could be the issue here, and how do I resolve it?
I have recently bought a 32gb micro sd card from eBay and was wondering if there is some kind of check I can do to make sure it has correct memory on it, I have heard that some of the sd, hard drives and flash cards from eBay are being faked and what looks like a 500gb hard drive people find out later that its just a 1gb flash drive inside with some kind of modded files in it that makes it look like a 500gb drive, upon transferring files they just delete anything past 1gb.
View 5 RepliesI did a clean install of Windows 10 and, because of problems with installation,I disconnected all unnecessary DVD drives and expansion cards etc. I decided to reconnect my DVD drives today to two spare ports on the mobo but, when I started the computer I got a black screen with two strange symbols before Windows attempted to start. The computer just hangs on the black screen. I tried disconnecting the drives in turn, different SATA cables and even starting in safe mode but the result is the same - black screen with strange symbols immediately after POST.
View 1 RepliesWhat that page is called, but when I want to change save locations, none of my drives show up. It worked before but now it just doesn't want to display anything sadly. Here are a few pictures of what I am talking about.
My drives wont show up in this section either...
The thing is though, they display properly in the "This PC" Section so I know they are plugged in correctly.
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
Getting ready to move from Win 7-64 to Win 10-64 when 10 is available next month. It's my understanding that Win 10 will not install over Win 7 so I'd like to install a new 250Gb SSD (I currently have Win 7 on a 128Gb SSD as C: ) for a clean install on it. Once all my files & software are transferred I'll keep the current 128Gb SSD as an extra drive.
So, are all SSD Hard Drives created equal? I'm looking at NewEgg & the prices are all over the place. My current SSD is a Cruicial 128Gb which has worked 4 yrs flawlessly.
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
View 2 RepliesI just completed an update installation on a desktop PC running Windows 7. Now my hard drives show up as removable drives.
Normally this is due to the need to install an AHCI driver. And that is normally the Intel Rapid Storage Technology Driver for Intel chipsets. The driver was installed in Windows 7.
Is this a case where I need to manually install a new IRST Driver for Windows 10? If so, should I uninstall the existing first, or will the new one overwrite the old?