Drivers :: Panasonic Printer Scanner Not Working?
Sep 19, 2015Panasonic MFS printer/scanner not working after installation of Windows 10 on my PC.
View 1 RepliesPanasonic MFS printer/scanner not working after installation of Windows 10 on my PC.
View 1 Repliesbuild 10049; i'm able to print but when i scan i get this error message ; i change location but i get the same error;
View 9 RepliesAfter upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 RepliesAfter upgrading to Windows 10, the scanning on my HP printer doesn't work. The other printer functions work o.k.Should I simply delete the printer and reinstall it?
View 1 RepliesI've already used the printer migration tool with success on Windows 10 Pro to import my old printers drivers from Windows 7.
But on Windows 10 Home it does not seem to work. I get a error message :
"can not find the file c:WindowsSystem32PrintBrmUi"
I have installed Windows 10 after having 8.1. I cannot get my printer to work it is a Kodak one wii fii enabled but since installing windows 10 it will not print via wii fii. It has a couple of times printed via the usb cable but more often than not wont print. I wondered if it was anything to do with it picking up which port I am trying to print from. What I can do. Was thinking of getting rid of Windows 10 and going back to 8.1 but dont know how to do it.
View 3 RepliesI have an Epsom RX560 (Printer/Scanner/Copier)
When Connected to Windows 10, it recognised the Printer straight away.
No need for the Install disk, it was up and running in just a couple of minutes and even without the install disk the results are picture perfect.
Is there somewhere in Windows 10 where it would recognise the Scanner instead of the Printer, or would I have to use the Install disk.
The issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.
Steps taken:
* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this.
* Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.
My canon printer isn't supported by Windows 10. Troubleshooting it just tells me there is no drivers. It prints fine, but i cannot use the scanner. Is there any way i can get the scanner to work, more specifically in gIMP?
View 4 RepliesI've been experimenting with Windows 10 using a VM (VirtualBox) before upgrading. One challenge has been to see if I could get my old 1999 Epson Perfection 1200 scanner working in Windows 10 since Epson do not provide any 64 bit drivers.
I discovered you can use the Epson 64 bit drivers for the Perfection 2400 and they work fine with the Perfection 1200. The Epson Scan program is fully functional for normal reflective scans and film scanning (if you have the attachment). The built in Windows scan program also works. This fix also works in Windows 8.
Here is how to do it:
Download and install the Perfection 2400U drivers from Epson USA, version 3.04A [URL] ....
Connect and turn on your scanner
Run Device Manager
The Perfection 1200U will be shown under under Other Devices
Select Update Driver
Choose 'Browse my computer for driver software"Choose 'Let me pick from a list of device drivers on my computer'
UNCHECK the 'Show compatible hardware
'Click on 'Epson' in the Manufacturer box, and the scroll down through model until you find "Epson Perfection 2400', and choose that, and press Next
Ignore the 'Update Driver warning - choose 'Yes'; to continue to install.The Perfection 2400 will now be shown in Device Manager. Note that the Perfection 1200 will still be shown under Devices & Printers
Run Epson Scan and test the scanner. You may need to log out and log in again for program to work
I've upgraded a couple dozen computers from Windows 7 to Windows 10 and was informed today that on at least three of them the print notification balloons are no longer working. I have verified this is the case, especially since it is happening on my machine and I hadn't noticed. It might not be working on any of them and it definitely was in Windows 7.
I first went into the Print Mangement App and checked on the Print Server Properties Advanced tab. Both "Show informational notifications for network printers" and "Show informational notifications for local printers" are properly checked. I tried unchecking and re-checking with no success.
I then went into the Registry Editor and manually deleted and re-added the keys for HKEY_CURRENT_USERPrintersSettingsEnableBalloonNotificationsLocal and HKEY_CURRENT_USERPrintersSettingsEnableBalloonNotificationsRemote. No success.
I then went into the Group Polilcy Editor and went to the User Configuration/Administrative Templates/Start Menu and Taskbar to ebable the policy for "Disable showing balloon notifications as toasts" since I read that could cause problems. No luck.
I need to get these working because while it doesn't affect most of my users, I do have a few that use that balloon as a check to be sure all expected pages printed from an ERP system and they write that number on a check sheet.
HP deskjet 1010 printer not working.I deleted and added it with downloads from HP, the latest software and drivers and it does not print. The printer shows up in my control panel and in the Device manager and properties says its working, but is not. Maybe there is commands I need to execute in CMD.
View 2 RepliesMy Epson SX115 printer is not working today, it is the first time i have used it since installing Windows 10. I have tried uninstalling & reinstalling the printer but it makes no difference. I am having lots of problems with my laptop since installing Windows 10.
View 1 RepliesIn setting it says driver is unavailable.
View 1 RepliesDon't know if this is the right area but when I try to add my Canon MP 600 printer I can't. Have tried to follow the instructions when I click on add printer but it's all Chinese to me.
View 2 RepliesHP 1512 all in one printer only has a usb connection (not wireless) It was connected and worked in Win 7 but would not work in Win 10. Win 10 does not recognize the connection during installation.
I followed the directions in the printer support, disconnected and reconnected, uninstalled and reinstalled, got HP to connect to my computer, and worked on it for 2 days. Now I have no Printer Support files (HP Techs deleted too much?)
I want to delete a printer selection from the print window for example text document File>Print I've deleted it in the window but it comes back.
View 3 RepliesAfter I installed windows 10 my printer won't print. It shoots out the paper but it is blank. I checked and all the drivers are up too date. I use a Canon MX860 All in one. It worked fine on Vista, 7 & 8.
View 1 RepliesI have no printer notification when I'm printing. In the control panel -> devices and printer -> printerserver properties these are enabled. I have no hiden icons in the taskbar. I tried in the windows registry the setting from windows 7:
HKEY_CURRENT_USERPrintersSettingsEnableBalloonNotificationsRemote and HKEY_CURRENT_USERPrintersSettingsEnableBalloonNotificationsLocal.
But this also don't work. I'm printing to and HP Deskjet 895 CXI on an WIndows Home Server 2011. On my Windows 7 Pro machine the notification is present.
I was trying to add a printer and I had the message that the printer spooler don't work! I tried 3 different ways manually via command prompt and via windows devices system and force start automatically but nothing. it cant start. Some messages i got trying to fix it it was there are no resources for this operation!
View 1 RepliesI have a default printer which is a network printer for 99% of my printing. However, I do use a local printer when printing checks.
I have the default set to the network printer and that is what I have set for the past several years through Windows 7 and now with my Windows 10 setup.
Since the latest November update, my computer keeps changing the default printer back to my local printer for no apparent reason and without notice. So when I go to print something, if I don't take care to check, I send it to print on my checks.
This is a new behavior over the past few days - the default printer becomes unchecked, leaving me unable to print. Happens with or without a reboot. This would be relatively easy to fix each time, except that the Devices & Printers page takes 30-60 seconds to open
View 9 RepliesNew to 10 and unable to install Samsung printer ML1210. printer remains offline but shows samsung universal printer driver installed. I understand this is a recognised problem
View 1 Replieswhy my print spooler keeps shutting off since i loaded W10. I have a HP ENVY and have tried to run both printers that worked prior to the install. Both work on the other laptop that isnt running W10.
View 3 RepliesTried to set up my Canon CP720 photo printer today. Canon say they have no drivers available, found one on Cnet which I downloaded to old laptop still on Vista but when I try to install it using 10 it says that this version of windows cannot download a printer driver.
View 2 Repliesprinter attached to mac mini. have bonjour on pc with win 10. when i open the bonjour printer wizard it says "no bonjour printers are available. all 3 are networked together on a home network (WORKGROUP) i can share files from the mac but can't print from the win 10 pc
View 9 Replies