I installed Windows 10 one week ago, but I still have issues with the sleep mode. I configured the laptop, that whenever I close the lid or I use my function key the sleep mode is started.
Unfortunately the laptop is either not entering the sleep mode correctly or is not able to restore it. Which means when I open several programs they won't open again.
If have an ASUS Transformer Book Flip TP500LA:
Intel i3 4030
4 GB Ram
240 GB SSD
I tried the following so far: BIOS Update to the newest version 203Downgrade the Intel MEI driver to an older oneReinstall the graphic and touchpad driver Nothing of that was successful. Are there any logfiles to analyse?
I just changed from DVI to HDMI and now when I shutdown my computer my monitor will not enter sleep mode, and will display 'Cable Not Connected' as shown in the image attached.
I have installed W10 twice using the update feature. Everything work fine except when I want to shutdown or put the machine to sleep by clicking on those options, the machine makes noise like the HD is working. It then just shuts down and reboots again. The only way I can shut it off is by using the button on the computer.
I had recently performed a clean reinstall when I upgraded my laptop to a Samsung 850 Evo, and ever since then I've had problems with sleep. If I initiate sleep, hibernation, or shutdown then the screen goes black but the status LEDs stay on. punching all the buttons do NOTHING, with my only recourse being to press the power button until the lights go out. After which the system acts as if I woke from hibernation as normal. Restarts are unaffected, which is a good thing as having to force-restart my laptop every week will get old fast.I believe I have installed all needed drivers, and Device Manager does not show anything missing.
When I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd unplug all usb devices before going to sleep/waking up rollback graphics drivers resetting power plan settings and power button settings back to default state
Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.
Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.
This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
If I leave Western Digital My Book plugged into a usb3 port at shut down there will be a restart in a few seconds.
This has been the action through both versions of Win10. (Currently on the 2nd version as of Nov.20) At this time the only items that allow restart are mouse, keyboard and network adapter Fast Start is turned off An extra usb3 board was installed during the first Win10 but two usb3 items cannot be inserted side by side.
One will read as a usb2 if two are inserted into the new 2 ports in the rear. This My Book now is the only item plugged into that back USB3 port. The drivers for usb3 appear to be current according to the mfg site. When this external is ejected then the computer shuts down. On Win7 pro this external could be left plugged in all the time.
Is a line of attack to remove this new usb (2 on front, 2 on back) and start over with another?
I just recently updated. I then created a boot disk and performed a clean install. I use a Razor Black Widow Ultimate keyboard and a Logitech G9x laser mouse. I can reboot, I can shut down and restart and everything seems to work fine. But, after leaving the pc off all night and start in the morning I have no mouse or keyboard. This has happened Saturday morning, Sunday morning and yet again today. Fortunately, I have Acronis backup of my install, so when this happens I just re-image the hard drive and start searching for solutions again.
I have the latest Logitech mouse drivers and running Razor Synapse for keyboard software.
The latest thing I have done is disable fast boot but have not had it shut down long enough to see if it fixes the issue.
I resurrected my old HP DV5-1044CA. I did a fresh Windows 10 install. Strangely when the laptop sleeps or if I put it to sleep with the power button or by closing the lid, I can wake it with the keyboard or power button and use the keyboard to enter my PIN but after that the keyboard no longer works. I have to restart to get the keyboard working again.
This was working fine on Win 8.1, but since my upgrade my PC now won't wake up from any keyboard, mouse or PC power button press once in S3 sleep or hibernation.
The only way to wake the PC is to reach back to the PSU and turn the power off, wait 5 seconds, then turn the power back on. I can then press the power button on the front of the PC and Windows then resumes from sleep.
powercfg /A returns this:
The following sleep states are available on this system:
Standby (S3) Hibernate Hybrid Sleep Fast Startup
The following sleep states are not available on this system:
Standby (S1) The system firmware does not support this standby state.
Standby (S2) The system firmware does not support this standby state.
Standby (S0 Low Power Idle) The system firmware does not support this standby state.
I have the latest firmware on my relatively new Gigabyte 970A-D3P.
My cursor on Windows 10 seems to freeze / disappear every time when I wake up my laptop from a 'sleep' state. Sometimes it takes multiple reboots to get the cursor back. I have seen other posts online about this problem, but unable to find a fix. I am almost tempted to go back to Windows 8, which used to work OK for me. Details listed below.
Windows 10 Pro, 64 bit Hardware: Sony Viao Laptop Model # SVS1313AGXB Synaptics Touchpad driver screen attached below. The "Update Driver" button is disabled. No drivers listed for Windows 10 at Sony support page: [URL]
A few days ago I updated my HP Envy laptop from Windows 8 to Windows 10. I used to be able to close the lid and the computer would enter sleep mode, and come out of it when I opened the lid. After updating, it now goes into hibernation mode when I close the lid. In the Sleep and Power Settings, the only options available for me to choose for when I close the laptop lid are "Do Nothing," "Hibernate," and "Shut Down."
Following recommendations for similar issues, I updated the driver for my display adapter. Unfortunately, this hasn't changed anything. I've noticed, however, that in the Device Manager, the symbol next to the Intel(R) HD Graphics Family has a little exclamation point in a yellow triangle. Under the display adapter Device status it reads "Windows has stopped this device because it has reported problems. (Code 43)"
In addition to finding no mention of sleep mode anywhere on my computer, I'm now unable to change the screen brightness by any means.
I read somewhere that I can allow sleep mode by changing something related to the BIOS? This sounds complicated.
I have a generic Microsoft 200 keyboard and I'm running into two issues:
1) My keyboard goes into sleep mode every 5 seconds. I can tell because the Num Lock light goes off and comes back on when I hit any key.
2) If I long press a key, it seems to go into "sticky" mode and keeps pressing until I press it back again. This is especially troublesome when playing video games.
- I've checked power saving modes, all seems ok at default. - I've checked and Sticky Keys is disabled as well as any user accessibility option.
When the computer goes to sleep, it accesses the DVD drive (for some reason). It then makes a noise for a second or two, which is pretty annoying. It has no reason to even mess with the DVD drive. I think it is trying to see if there is a disk in there or something (maybe so it knows what to do when it wakes?)
I followed Brink's tutorial here: Shut Down Computer in Windows 10 And I saw that there are 2 ways to fully shutdown Windows through cmd: /s and /p. What is the difference between these 2, if both of them are said to perform a full shutdown?
I had this issue with my PC in January and went to all the trouble of a rebuild and a new motherboard. That was with Windows 8.1. However I now have this issue in Windows 10, it suddenly started a month ago. I am not moving the mouse or pressing any buttons. There is a 2-3 minutes gap and the system comes out from 'sleep' mode.
I have a MadCatz Rat9 wireless mouse and in windows 10 when I go to sleep mode the wireless mouse does not charge. I had windows 7 ul before and the mouse charged fine in sleep mode. In device manager I checked the mouse drivers and in power management allow the computer to turn off this device to save power is greyed out. Allow this device to wake the computer has a checkmark. why windows 7 charged ok in sleep mode and windows 10 will not.
Had this problem now since installing Windows 10 for the first time. Have re-installed 10+ times, from new downloaded ISO's with hash tag checks just to make sure. Have bought all new hardware as well; CPU, PSU, Mainboard, Computer case, CPU Fan (3 of them), problem still persists, is obviously a Windows 10 problem.
CPU Fan slows to almost halt after waking up from sleep/hibernation.
I have an Asus Zenbook UX303LA, and I upgraded to 10 yesterday. When I put the comp to sleep and wake it up by opening the lid, the screen begins blacking out and refreshing. Everything else seems fine--I can open apps, navigate the desktop and so on, in between the black outs. The problem has so far been solved by restarting each time. I can't find any information on this issue, so I don't know what might be causing it (driver incompatibility with 10 seems a likely culprit--this was not at all an issue with 8.1, which is what I was running prior to the upgrade).
I have been experiencing an audio problem very recently with my laptop (Model Schenker C505).
Whenever I close my laptop lid, and make my laptop go to sleep, the audio will not reactivate once I wake it up. However, a restart of the system seems to do the trick and the sound starts working again.
I have updated all my sound drivers (Realtek High Definition Audio) and restarted Windows Audio and Audio Endpoint in system services but the sound just won't come on.
I have noticed that the laptop does not go to sleep nearly as quickly (almost instantly) as before when the sound was fully functioning. Perhaps this could be part of the issue?
This is something that recently just started happening. I click on the start button and click Shutdown and everything seems to go normally and the monitor goes black but the computer will not shutdown. The activity light continues to flash and after a few mins my PC just boots back up, almost like it was doing a reboot.
I am in a similar situation. Upgraded a self build PC from Windows 7 to 10. Now, I am unable to shutdown. I have turned off the Fast Startup, but it still reboots when I hit 'Shutdown'
