I have been attempting to run a USB Network Adapter on my new computer, but I get an error saying that it has no driver.
I've been trying to find a way to work around this error, but I have had no success.
Here is the Hardware Ids:
USBVID_0434&PID_7500&REV_0100
USBVID_0424&PID_7500
The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.
It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.
However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to work.
So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.
I just upgraded to Windows 10 OS. It doesn't recognize my iPod. When I attach to the USB port, I get a message there's a problem with this drive. Then, Disc Check can't be performed because Windows can't access the disk. When I open Settings > Devices, the message says iPod Driver error.
I expect I need a new Driver installed.
I've repeatedly attempted this, but always get "An error occurred during setup. Restart your computer, then run setup again". This is an all too typical message you can find associated with many Epson products.
I've tried:
-Clean boot
-Safe mode (install enabled)
-Using an Epson removal tool I finally obtained after my 5th chat with Epson.
-An Epson fix deleting temp folder and looking for setup.exe that never appeared.
-Manually removing all Epson folders and registry entries I can find.
-Disabling firewall and AV
The same CD installed ok on my 6 year-old laptop (both run Windows x64).
I've run SFC /Scannow - ok
At best, the scanner is recognised as being connected when plugged in, and appears with a yellow trangle under 'Other Devices' in Device Manager.
I keep getting these two error
i) Driver IRQL NOT_LESS_OR_EQUAL error
ii) Driver_Power_State_Error
It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do.
i have pc with GE port n using cat5e cable but when im conected to modem huawei HG8245 its only detect 100mbps when im try manual set to 1.0gbps lan network say unplug.
View 9 RepliesI'd like to know what I have to do in order for Windows 10 to stop reinstalling the latest(not working) video drivers. Every single time I go and install the working driver for it, after a reboot Windows has done it again and reinstalled the latest driver. How do I tell Windows 10 to let ME decide which driver to install and keep??
View 1 RepliesThe generic PnP monitor driver in the device manager keeps reenabling/reinstalling itself whenever I restart Windows 10 on my early 2011 MBP (Boot Camp). I want to leave it disabled so the brightness controls on the keyboard work, otherwise they don't.
I do not want to disable automatic driver update checking by Windows 10. I know that if I turn off automatic driver installation via device installation settings and enabling "Prevent installation of other devices not described by other policy settings" will keep the "Generic PnP Monitor" driver uninstalled, and this is certainly one solution that works, but disabling these features interferes with the installation of other devices (one example is the TAP driver for the Private Internet Access Windows client).
There is no available apple display driver I can install over the generic driver that I have found, but the brightness controls work perfectly when the Generic PnP driver is disabled/uninstalled. I just wish it'd stay that way after a restart.
So this past weekend I upgraded to Windows 10 from 7 and it went very well. I have a USB Microsoft Digital Media Pro Keyboard and IntelliMouse 2.0 wireless mouse, both of which were prompted to install the software suit first thing after Win10 welcome desktop and worked perfectly.
However, I wanted to have a "clean" install, so today I did a PC Reset. Everything went well til the Win10 screen to enter regional info, when my USB KB/Mouse weren't detected/working. I still had an old PS/2 KB/Mouse that worked after a restart.
Here's the problem -
I used these to check my drivers - [URL] .... [URL] .....
and Intel said I didn't need any. I know the ports are good because my USB keyboard and mouse both light up during Intel Bios flash but go blank once
Windows 10 starts up. I'm thinking there was something changed in the registry during the PC Reset that made these controllers incomplete. I also couldn't find anything on
Intel's website to download these drivers either. They tripped these events -
VEN_8086&DEV_27CB&SUBSYS_58428086&REV_013&61aaa01&0&EB
VEN_8086&DEV_27CA&SUBSYS_58428086&REV_013&61aaa01&0&EA
VEN_8086&DEV_27C9&SUBSYS_58428086&REV_013&61aaa01&0&E9
VEN_8086&DEV_27C8&SUBSYS_58428086&REV_013&61aaa01&0&E8
How a clean install is supposed to work better than an upgrade .
Intel D975XBX2
Q6700
Radeon Sapphire 6870 1GB
8GB DDR2-800
Windows 10 Pro
Recently I got my free windows 10 upgrade. Once I upgraded I wanted to see if I got any new drivers to install so I deleted my drivers and now once I installed them back I get the error "No AMD Graphics driver is installed or the amd driver is not functioning properly. Please install the AMD Driver appropriate for your AMD hardware." I have dual graphics. They are AMD Mobility radeon HD 4200 series and AMD mobility radeon HD 5000 series. In device manager HD 5000 has error code 43 and HD 4200 says no drivers installed for this device.
View 1 RepliesMine Dell Dimension 9200 bought with Dell Wireless keyboard & mouse.
This has been working flawless inWin 7 Ultimate x64. The keyboard still uses the Dell's BT Mini Receiver and the Mouse is Logitec M510 with it's own Logitec unifying receiver.
Since my upgrade to Win10 just now, the wireless keyboard is non communicable with the system. The Logitech mouse is working.
Under device manager Bluetooth -Broadcom Bluetooth 3.0 USB has a yellow exclamation mark. My attempt to update the driver - gets a message as the latest is installed.
Using windows update I was installing the MS Drawing Driver and my keyboard flashed (blue lights) and the next thing a BSOD. I have attached the collected files, how to confirm the MS Drawing Driver is responsible.
View 4 RepliesI received an upgrade offer from Windows 8 to Windows 10. After downloading and installing the upgrade the system worked fine but, when I turned the laptop off and turn it back again the problem starts....I can't open it anymore screen is always showing this error
"0x8000ffff" and it also shows this message "error driver not less or equal"
I've just bought my first SSD and want to install windows 10 onto it. I used the media creation tool to install the OS onto a bootable USB but when I try to install the software onto my SSD I get an error. It reads:
"A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD or USB flash drive with the driver on it, please insert it now."
I have tried hooking up my optical drive and inserting the disks that came with the motherboard and graphics card but it says it can't find any drivers. I'll attach an image below of the problem I'm facing.
Currently I have windows 10 installed, although the problem was persisting even while I was using windows 7. The problems started when I ran out of space on my SSD and tried to bring files over to my other HDD for storage. In the end I threw my hands up and reformatted my Windows 7. And since my SSD was too small to keep everything on last time I decided to install windows on my HDD.
After updating everything and so on my computer, again, decided to BSOD. So I upgraded to windows 10 and eventually it started doing the same thing. I've looked through my device manager and have not located any out of date drivers.
Here is my log for review.....
First BSOD I've had in Windows 10... Outside the usual ntoskrnl.exe BlueScreenView points to NETIO.sys, netr28x.sys and tcpip.sys...
Ran update drive for my wireless card, says it's got the latest drivers already... checking my Ethernet drivers, even though I don't use the Ethernet.
Here are the files and stuff.
Finally got into safe mode through command prompt and was able to delete the driver from my Nvidia graphics card. Booted back up in normal mode and began the download for new driver. Then BSOD during installation.
View 4 RepliesI upgraded my Toshiba laptop automatically from 8.1 to 10 when the software came out (months ago) - have had no issues with it. Then I was using my laptop it flashed blue and turned off. It now comes up with with recovery - your pc/device needs to be repaired (see image) - I'm able to access the recovery settings - have tried refresh, system restore, automatic repair, nothing works and seems to get worse. I have a lot of personal files/photos that haven't been backed up for about a month and want to save them! I've downloaded the Windows 10 iso to a usb - but have only get semi regular access to a Mac so unsure if it's bootable.
View 3 RepliesIt take 2 mins for the laptop too completely boot up what is wrong. Also i got bsod few mins ago that read driver power state failure.
View 1 RepliesToshiba Satellite L50-A-K1S
Intel Core i5 3337
4 GB RAM
Intel 4000 + nvidia 740m
widows 10 tech preview
I get driver power state failure error after playing game for 1 or more hours and then exiting, after I keep a game open for ~7-8hours.
When I open a game and close try to open new game. When I browse for 4-5 hours
I have upgraded/ downgraded drivers for both nvidia and audio + network drivers. Itried disableing wifi and bluetooth . Updated then reinstalled windows...
After installing build 10074 followed by Windows Update, I got the following report, "ELAN DRIVER UPDATE FOR ELAN INPUT DEVICE FAILED - ERROR CODE 0x80070103"
View 1 RepliesMy laptop is of Lenovo make, model No. G510s Touch. I am using Windows10 operating system. My web camera driver (micro soft veraion 2015.1064.10.0) got corrupted with virus and camera stopped working.
View 6 RepliesI just upgraded to Windows 10 on a brand new Lenovo Z50 laptop. It crashes whenever it is not plugged in with the error message THREAD_STUCK_IN_DEVICE_DRIVER ....
I assume there is some driver that I'm forgetting to download that is related to the battery or something?
I have upgraded to windows 10 about a week ago but everytime I turn my pc on, it says HVECK is not supported by this OS. My audio driver is VIA High Definition Audio driver. It seems like they dont have an updated driver for windows 10. What do I do? Can I change to Realtek instead of VIA? I mean is that possible to use a different audio driver? Like, uninstall VIA completely and install Realtek?
View 4 RepliesDell WLAN bluetooth driver is not installing on my laptop . I found out that the same driver is working fine on my friend's laptop and i even used same driver for windows 8.1 previously.While I install it ,it shows an error that "The installer cannot run on this platform...",,I even tried refreshing my laptop but still it didnot work..
View 19 RepliesSince the move to Windows 10 (from 7) I haven't been able to connect to my Bluetooth speaker. This worked for me under Windows 7. There is no bluetooth entry in the device manager.
I have a Dell Studio 1555. Both the WiFi and the Ethernet connection to the Internet are OK.
The computer is a dual boot machine with Ubuntu. The bluetooth feature does work in Ubuntu.