I have 3 flash drives that, for some reason, no longer function regardless of which USB port they are attached to. They display as if they are ready but indicate "not responding" as soon as I try to access them. I see message "not migrating" under Events in their properties. This is a problem that has just arisen. I've been running Windows 10 since official release.
View 5 Replies
I get this error on a Surface Pro 3 which I have updated to Windows 10. It normally occurs when playing Minecraft, anywhere from 5 minutes to 1 hour after opening. I have attempted to update the drivers, but it says that the drivers are up to date (which is odd as I am using Windows 8 drivers on a Windows 10 machine).
View 1 RepliesSince yesterday i keep getting this message and image screws up, sometimes the pc restarts, i downloaded the lastest nvidia drivers and updated windows.
View 1 Repliesdisplay driver intel hd graphics drivers for windows 8® stopped responding and successfully recovered.
PNG 7.24KB
I'm having this frequent problem with my desktop computer. Since updating from Windows 7 to Windows 10, every time I use my PC (at random times) the whole screen will just go blank and I'll get a little message popup in the right hand corner saying.
Display driver stopped responding and has recovered
Display driver AMD driver stopped responding and has successfully recovered.
I don't use my PC for anything real heavy it just randomly happens.. From either scrolling up and down a website page or watching a YouTube video etc... I've tried upgrading my graphics driver but still no luck.
Computer type: PC/Desktop
System Manufacturer/Model Number: DELL INSPIRON ONE
OS: Windows 10
CPU: AMD Athlon II X2 240
Motherboard: Dell 0DPRF9
Memory: DDR 3 4GB
Graphics Card(s): AMD Mobility Radeon HD 5000 Series
Sometimes when I play Hearthstone (which isn't even a super graphic intensive game), the screen freezes for 1-2 seconds before showing this message. figure out what could be causing this?
My computer is a Lenovo Flex 2 running Windows 10.
External usb sticks or drives list twice in the file-manager.
Tried the advice in this text. It lasted only until my last update. Then it was back to dual entries again.
Would like a permanent solution. Maybe a .reg?
I've been having this issue for almost a month now and nothing I have done has managed to fix the issue. Randomly I will get this error message:
After a few of these error messages it will eventually BSOD or freeze as seen here:
I will get both of these by doing pretty much any task on the computer, whether it be watching a video, browsing a site or even just sat at the desktop. However extremely interesting is the fact that this error will not appear in any form whilst playing games on the computer. It will not error or BSOD or anything. But doing any other task will do so, even if i have 1 program running on my entire PC.
Things I have tried so far:
Updating drivers
Uninstalling/reinstalling drivers
Installing beta drivers
Using 'Display Driver Uninstaller' to clear drivers
Cleaned out the PC of all dust present
Took out and reseated graphics card from motherboard
Put my 2 RAM sticks into different slots on the motherboard
Unplugging my 2nd monitor so I am only using one
Adding a TDR delay to my registry
Full virus scan
Updating my BIOS software
The only things I have not tried is swapping out hardware components as I am unsure if it is a hardware issue or a software issue as of yet.
I've noticed that the BSOD and errors become more common the longer the PC is left on. For example last night it was blue screening every 5 minutes of being active.
The error does not seem to continue whilst in safe mode as last night i spent a long time in 'Safe Mode Networking' in order to look up possible fixes. I am not sure if it does not continue because of drivers not being in use or because the quality is much lower than normal.
I keep getting this error ...
I got this image from google i have the latest driver version(361.43) and i still get it just got it ~30 mins ago.
So I got a new asus M5a97 for a new socket and whatnot and now when I shut down there are 2 issues (title bar not long enough for both). The first is whenever you shut it down it leaves all usb ports powered.
The second is that every second time you try to boot it goes to the asus screen where there's meant to be the little circle made of dots spinning and no circle appears nothing happens. Hardware all seems fine so not sure what needs changing.
Since upgrading to Windows 10 from 8.1, I've seen the following message several times.
Display Driver stopped responding and has recovered
Display driver Intel HD Graphics Drivers for Windows 8(R) stopped responding and has successfully recovered.
When it happens, my laptop screen goes black for a few seconds, except for the taskbar and toast notification. I also have an external monitor that doesn't seem affected at all.
I can reproduce the error pretty consistently if I rapidly switch a Flash video back and forth between full-screen and embedded, but that's not the only time I've seen the problem.
As far as I can tell, everything continues running. Even the full-screen video continues running after the screen isn't black any more.
The weird thing is that the driver name it shows isn't the driver I'm using. I've already upgraded my display drivers to the latest available from Intel's site.
Some things I've observed:
The information presented by Windows in Settings -> Display -> Advanced display settings shows the driver for Windows 10 that I downloaded from Intel.The "Intel HD Graphics Control Center" that was installed along with the driver shows the latest driver version that I downloaded from Intel.In Settings -> Apps & Features there's only one "Intel(R) Processor Graphics Driver" listed.Event viewer shows very little useful information:
General
Display driver igfx stopped responding and has successfully recovered.Details (XML View):
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Display" />
<EventID Qualifiers="0">4101</EventID>
[Code] ....
It's conceivable that Intel updated the driver, but forgot to change the string somewhere so the error is actually for the Windows 10 driver. I don't know how to find out exactly what failed or why. It's getting that string from somewhere.
I recently bought a toshiba satellite c-55 laptop, as soon as i got it i upgraded to windows ten. i do not know if the usb ports worked before my upgrade, but they do not work now. i tried to download drivers but nothing has worked.
I know i have power to the usb's because my usb hub lights up when i plug it in. the device manager says the usb's are working but they are not. Is there a way to see if it is a hardware problem?
How do I set a Windows 10 pc to see all drives, incl USBs? I'm on a new Dell laptop.
View 2 RepliesSo I have a Lenovo touchscreen but i don't have the touchscreen part, I was using it but then it crashed, and now it wont accept USB drives, and my keyboard and mouse install into the computer via USB what do i do.
View 1 Repliesfew days ago I installed Windows 10 pro from Windows 7 ultimate. Since installation of Windows 10 my keyboard and mouse remain powered after shut down PC(lights on). I have never had this issue before on W7.
View 1 RepliesAfter upgrading to windows 10, my mobo USBs will all disable... Why is this happening and how do I fix it? this makes my wifi mouse and keyboard stop working...
View 1 RepliesSo I just finished installing windows 10 and I'm having this issue where my display driver isn't being recognized and instead its now showing "Microsoft Basic Display Adapter". Is there any way to bring back the old driver to its original resolution?
I have a Dell Inspiron N7110 and it seems like all the drivers are only compatible with Windows 8.1, how can I bypass that?
Also, another issue is that Windows Troubleshooter doesn't work. When I click on "Show more" it says that "Context: Restricted".
I actually have two issues (the second being that the built-in microphone isn't working, but that's the least of my worries). I have my laptop connected to an external monitor & I can't get any non-system sounds to play.
Dell Laptop w/ only HDMI video connected to Dell VGA monitor (no speakers) via an adapter that has a 3.5mm jack for speakers. I can get system sounds via the laptop's speakers, but I can't play MP3s and YouTube videos have no sound. I had things working at one point (no, I cannot remember what I did or can find the tutorial that I used), but after moving my desk (unhooking the laptop from the monitor), cussing at non-functional microphone, and setting things back up, I'm back to no sounds. When I did get the speakers to work, they were working on the 3.5mm headphone/microphone jack on the laptop, but not through the jack on the HDMI/VGA adapter.
I've seen things about disabling the HDMI audio controller. I cannot change the default audio devices via the sound dialog box that is available by right-clicking on the sound icon on the bottom right of the screen. I'm assuming that the Dell speakers that are stuck as default are the on-board ones on the laptop.
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
View 2 RepliesI am having a problem with the windows 10 upgrade service.
It keeps telling me my display adaptor is a Matrox adaptor but the actual adaptor is an intel motherboard adaptor.
No Matrox adaptor has ever been fitted (I have had the computer for 15 years (various new motherboards etc) and never have used a Matrox adaptor.
It wont let me upgrade as it says the adaptor is not supported.
I have just downloaded and installed Windows 10. All is good except the default resolution seems too large. I have tried all the options available in Control Panel/Display/Screen Resolution but none work or are in proportion except the basic default 1024 x 768 setting though this is way to 'big' for me.
My monitor, an HP w1907v, appears to want 1440 x 900 at 60 Hz but all resolutions options available in Win 10 are at 64 Hz - not sure if this is the problem? The installed graphics driver is the Microsoft Basic Display Adapter, a driver which the self-checking tool on the Nvidia website states is the correct driver for my old onboard graphics (Nvidia GeForce 6100 nForce 430).
I think I need to do something a little out of the ordinary. I cannot find a better driver but the resolution options are pants. Can I change the Hz from 64 to 60 and if so how, and will this offer the right resolution options for my monitor?
I have a Toshiba that I upgraded from Windows 7 Vista to Windows 10, but has no Bluetooth capabilities whatsoever, yet every time I shut down and turn my computer back on, whether it may be an update or just manual, I end up in the corner of settings with Bluetooth search on. I can't disable it because there is no disable button.
View 5 RepliesI'm running B10074 on my laptop , and I connected my external display to it as well as my external keyboard and mouse at my desk so I could sit there and do the setup etc without moving all of that out of the way. I had the laptop lid shut and off to the side while I was doing this. Then, I shut the laptop down, unplugged all the external peripherals, and turned it on again. It went through the windows boot sequence with the spinning circles, then black screen.
After 20 minutes of frustration, I realised that the laptop would show a login prompt only when I plug in the external monitor BEFORE i start it, and only if the laptop is closed while it is booting (when the lid is closed during boot, the Dell logo and spinning circles come up on the external display)
I further figured out that in Control Panel, it only displays the external display, its like the computer doesn't even recognise the internal display anymore. I dont know why that would be since when I first booted it up and installed drivers, I was using the internal display and everything was working fine.
Been having a hard time diagnosing the root of the issue I've been having with my custom-built PC. Two weeks ago, I started getting display driver crashes every time I was in a game. It would crash, then recover. This continued for a few days. I shrugged it off because I am aware that NVIDIA drivers have been having issues with Windows 10 lately. They are prone to crashing. However, a few days later and continued sporadic display driver crashes in-game I had my PC completely restart and then nothing happened. The monitor was blank. The LED's on my fans were on. I tried to power down the PC via shut down. Nothing happened. I had to shut it down by flicking the PSU power switch off. I then flicked the power back on, pressed the power button on my PC...same thing. LED's on fans were on, but the PC wouldn't boot. I opened up my side panel and saw that the CPU fan was not spinning. I powered everything down. I proceeded to take out the CPU 4-pin connector and use the other one (it was originally an 8-pin). The PC then powered on and has been working perfectly until today.
While in-game I had around my display driver crash and recover 5 consecutive times within seconds of the other. Eventually I turned the game off. My PC was normal until maybe an hour or two later I tried to launch another game. This caused my PC to instantly restart after getting past the main menu and loading a save game.
I proceeded to shut down. Used the original 4-pin when this happened the first time. It booted up, so it obviously wasn't a bad connector. Same thing. Tried a different PCI-E connector. Same thing. Then I proceeded to reseat my GPU, RAM, CPU, GPU and mobo power connectors. Well, I am now booted back up, launched Witcher 3 and no crash. Was in it over 10 minutes until I turned it off.
I was moving my PC around the week prior to the first time all this happened. I am wondering if my GPU simply got loose? My mobo doesn't have those things that snap into place, as you would on RAM slots. I also upgraded my RAM at the beginning of September.
Maybe I need a new PSU. Maybe I need a new mobo.
PC specs are as follows:
CPU: Intel i5-4590 3.3GHz;
CPU Cooler: Stock Intel;
Mobo: ASRock H81M-HDS Micro ATX LGA1150
GPU: EVGA GTX 960 2GB SuperSC ACX 2.0+
PSU: Corsair CX750;
RAM: Corsair Vengeance 16GB 1600MHz;
HDD: Toshiba 2TB 7200RPM;
Keyboard and Mouse: Corsair K70 Cherry MX Red Keyboard + Corsair M65 RGB Mouse
Temps are all normal. I know the CX line of Corsair PSU's isn't the best. I've had this since around July (around the time I got my GPU) and I don't have coil whine. I don't plan on keeping this PSU forever, I do plan to get a better one but at the moment this is what I have. I DID have coil whine or some sort of sounds when my display drivers were crashing soon as I launched a game. But again, since I reseated my GPU, RAM, etc, it appears to be stable and launching a game no longer restarted my system.
I just updated my display driver to the latest from Nvidia. Now the left half of the display is darker than the right half. I tried uninstalling the driver and reinstalling, but the problem remains.
The driver is Nvidia 355.60 WHQL , and yes my display card in on the list of supported cards. This is the driver for Windows 10 64 bit and my Nvidia GTS 450.
I have never seen this issue before and I don't know if it is Windows 10 or the Nvidia driver causing the problem.
I am getting this error message along with the driver crash after 1-2 months after upgrading to WIN10 from WIN8.1. It happens quite often few weeks ago it stopped now it started happening again. In event viewer there's a Dislpay Warning: Display driver igfx stopped responding and has successfully recovered. Event ID: 4101. Another thing I want to point out is that it says Windows 8(R) when my OS is running Windows 10? Why is that?
My Graphic driver is up to date. I tried uninstalling it then installing it back again but still happens. I also used DDU. So far contacted Microsoft Intel HP no solutions. Apparently INTEL are trying to fix this issue when already 2 new updates came out for the IRIS production driver and guess what didn't solve the issue. I put the TDR-Delay registry key still no luck.
