Drivers Not Working For New WiFi Adapter
Oct 3, 2015
I got my new Wi-Fi adapter today (TL-WDN4200) and in order to access its 5Ghz connecting capabilities, you have to download the updated drivers off the TP-Link website. I did just that. However when I go to device manager, right click my WiFi adapter and update the drivers. This error message appears when I click on the driver file: [URL] ...
I have windows 10 64 bit. Will that be the problem? since TP-Link has not released any official drivers for Windows 10 yet? Will I need to revert back to Windows 8.1 to access the 5Ghz connection?
View 1 Replies
Similar Messages:
Jul 29, 2015
i have recently upgraded to windows 10 but my wifi adapter is not working.
View 1 Replies
Aug 26, 2015
After upgrading my Windows 8.1 to Windows 10, I had problems with Wifi It cannot detect Dlink USB WIFI adapter which was running smoothly in 8.1. I think it has compatibility issues, I had tried many time, but now back to 8.1. make of USB Wifi Adapter for smooth Windows 10 run
View 1 Replies
Nov 16, 2015
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
View 1 Replies
Sep 19, 2015
Whats going on with my tablet (WinBook). I've installed W10 few weeks ago since then never had any problems with it, but today I noticed I cannot connect to wifi. it's gone from Network settings, if I open "connection" icon on task bar I only see Airplane mode..Network adapter from Device manager is also gone. What to do now...
I did try this - connect to internet via Bluetooth from Lumia phone and with Intel Driver Update Utility scanned tablet, only thing it found is update for Graphics driver.. what else can I do?
View 11 Replies
Aug 21, 2015
Latest driver installed, StarTech USB300WN2X2D, Mediatek/Ralink RT3572L
View 9 Replies
Sep 2, 2015
Ok so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
View 1 Replies
Aug 2, 2015
So yesterday my wi-fi started to turn off randomly for no reason, its not my internet connection becouse it works on other devices. Also i already tried ticking off power saving option on my network adapter, it worked for a while i thought, but after i restarted my laptop even though its still ticked off, its still turning off randomly.. (Also i noticed it turns off when i plug or unplug my mouse?)
Other problems i have:
1. Cant set opera as my default browser it asks me if i want to set it as default every time i open it and i always click yes..
2. Cant turn my touchpad off even though when i use fn+f9 it says its turned off..
View 9 Replies
Nov 16, 2015
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
View 9 Replies
Aug 18, 2015
changed from windows 7 to windows 10 unable to connect to wi-fi using netgear AC1200 usb adapter will not connect gone back to 7 works fine.
View 1 Replies
Aug 13, 2015
Just upgraded to Windows 10 (big mistake??) and lost WiFi. Norton scan report indicates IP address has disappeared from adapter.
View 1 Replies
Jan 24, 2016
My problem is, that one beautiful day my Lenovo notebook with latest Insider Windows 10 (11102) stop working LAN (yellow triangle) and Wifi (after few minutes of connection gives triangle too). In case of Wifi, I can simply turn it off and on again and it works for few next minutes, but LAN stopped working completely. It says, that in this computer isnt any internet protocol, but in setting both (IPv4&6) are ticked. Lenovo sent me to heaven, because drivers are already included in Win 10, so I cant reinstall it. Uninstall of drivers for LAN and Wifi and automatic new install doesn't work for me.
EDIT: I already tried this, but there isnt any word about driver updates of my LAN and WIFI.
View 2 Replies
Jan 6, 2016
I have installed Windows 10 after having 8.1. I cannot get my printer to work it is a Kodak one wii fii enabled but since installing windows 10 it will not print via wii fii. It has a couple of times printed via the usb cable but more often than not wont print. I wondered if it was anything to do with it picking up which port I am trying to print from. What I can do. Was thinking of getting rid of Windows 10 and going back to 8.1 but dont know how to do it.
View 3 Replies
Sep 2, 2015
I've had some issues with a BSOD for over a year now, first when I was running Windows 8 and now still with Windows 10. It first appeared after I got a USB wi-fi adapter which I replaced with an adapter that connected to the motherboard, but the BSODs have not stopped.
I inquired about it a few months ago on several other forums. It was apparently related to some driver that the USB adapter installed (the name of which I can no longer remember), but I was unable to uninstall it or delete it without my wi-fi becoming unusable. I'm also unable to use a wired connection in my apartment, though I'm not sure that would even be possible if I deleted the driver. The error code I get is "bad_pool_caller", but I believe I used to get "irql_not_less_or_equal" as well.
For some background, the BSOD usually appears when I'm doing something intensive over the internet like watching video on YouTube or Twitch, streaming audio, etc.
Here's my debug folder: COLIN-PC-Wed_09_02_2015_214036_86.zip
View 9 Replies
Dec 5, 2015
OS: Windows 10 Home, 64-bit
PC: HP Pavillion g6 notebook
Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)
Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.
Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.
View 10 Replies
Aug 16, 2015
For 2 weeks I've been trying to upgrade my Asus G50VT laptop from Windows 7 home to WIndows 10 home. I have tried over 5 times using Windows Update and several times using the Microsoft USB/DVD installer. Everything downloads fine; and gets to the black screen with the "installing drivers" with a percentage going around in a circle. It gets stuck at 32% every time. I have to force shutdown the laptop and it rolls back to Windows 7...
There are no new BIOS updates available from Asus (laptop was released in 2009) the latest BIOS is already installed and from 2012. I don't see anything for windows 10 on the Asus Website.I have all external usb devices removed. I have tried shutting off my WiFi adapter and disabling / uninstalling Norton Security/Anti-Virus.I have sucessfully upgraded 2 other machines from windows 8.1 to 10 with no problem.
View 1 Replies
Nov 24, 2015
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
View 9 Replies
Sep 16, 2015
I have a problem with Windows 10 Network Sharing feature. It assigns fine the IP address 192.168.137.1 to the network card that acts as the bridge to connect other computers to the Internet. But it's not working, and when one goes to the share NIC adapter and right-click on it and select PROPERTIES, and then from the list of it shows one select :
"Internet Protocol Version 4 (TCP/IPv4) then you see that everything is fine, the IP address 192.168.137.1 shows there and the subnet 255.255.255.0 also there. BUT ONCE YOU CLICK ON OK in that window, another Window POPS UP and a message saying:
"The IP address 192.168.137.1 you have entered for this network adapter has already being assigned to another adapter (in parenthesis it shows the same adapter that it's assigned in the SHARING tab in the main adapter), so there is not way to get out of that 'network card properties'. further down the message in that window says: DO YOU WANT TO FIX THE PROBLEM BY CHANGING THE IP ADDRESS FOR THIS ADAPTER? and the choices are: YES or NO
The command Line in an MSDOS window run as administrator: IPCONFIG /ALL doesn't shows any other virtual or real NIC with the IP address 192.168.137.1 except for the one that was assigned in the "Sharing" tab in the properties of the real NIC that connects directly to the ISP box.
I don't know if I have explained well this issue, but all I can say it's that no other network adapter has that IP address. I have a VirtualBox virtual adapter that it has an IP address totally different, the same as another Virtual VMWare adapter.
I even went to control panel > Device Manager > Delete both NIC's (the one that connects directly to the Internet and the one that acts as the SHARING network, and the issue remains the same.
I cannot use the Wireless Router to connect my tablets or WI-FI Cellphones.
I have several Operating Systems in the Same Computer to boot with, and Windows 8.1 for instance Network Sharing works fine in the same computer.
I'm running Windows 10 PRO 64bits
View 1 Replies
Mar 2, 2016
While trying to plug in a VGA cable, I accidentally turned off my power strip, which cut the power to my computer. When I turned it and my computer back on, I was unable to connect to the internet via Ethernet cable.
I went to device manager and under network adapter, it said "This device cannot start, code 10." I've tried reinstalling it, both automatically and manually from a CD and USB. I've done almost everything I can think of to fix this. I scanned and fix any errors on my hard disk, I've reinstalled all my USB drivers, I've power-cycled my router, I've tried different Ethernet cords, and I've tried to delete any corrupted files in my registry, but that must either not be a thing on Windows 10, or I am doing something wrong.
OS: Windows 10
Processor: Intel i7
Motherboard: Asus
View 1 Replies
Oct 1, 2015
I recently upgraded directly from Windows 8.1 64-bit to Windows 10 and I am having some problem with my Ethernet Adapter. My Ethernet Adapter is a Killer e2200 Gigabit Ethernet Controller, which is built in to my motherboard (MSI Z87M GAMING). When I first installed Windows 10, I found both a software suite and just the drivers themselves on the Killer website. I first tried the whole suite, but it didn't really work very well, felt unnecessary, and basically didn't seem to actually install any drivers. I then used the actual .inf file for my Ethernet Adapter to install manually. I uninstalled the driver and software, and then installed the driver manually through Device Manager by saying "have disk" and navigating to the folder and selecting the .inf file I downloaded. This works, but I have to repeat the process of uninstalling and reinstalling the driver every time I restart Windows.
There are additional variables that could also contribute to the problem. I am using one of those adapters that plug into the electrical outlet to extend the Ethernet line to reach my basement. I don't know if this really should have any effect on my problems, but I figured I should mention it. The product is made by TP-LINK. I also have VPN software on my computer, and part of running the VPN software is having it install a "TAP-Win32 Adapter V9" driver under Network adapters in Device Manager. This could be contributing to my problems, but I do need to have access to my VPN. I did not experience this problem at all under Windows 8.1 using the driver install disc that came with my motherboard.
View 2 Replies
Nov 12, 2015
The adapter works in windows 8.1 but does not start in windows 10. Device manager shows an exclamation mark. Installing a new driver does not work. The device manager tells me the best drivers are already installed.
View 9 Replies
Sep 27, 2015
Messed around with the drivers, now the ethernet device doesn't show up in the network adapter settings, although it shows up in the Device Manager. It is also apparently in sleep mode.So after formatting and installing Windows 10 x64 on my Dell Inspiron 3542, I decided to update/re-install the drivers from the official Dell download page. Windows Update had taken care of the hardware but the versions were outdated, so I set to work. After successfully installing almost all the drivers, I ran the Ethernet Controller Driver and after installing it, the ethernet device was disabled. BTW, the device shows up as "Realtek PCIe FE Family Controller".
I enabled it but it still remained disabled. In the Properties dialog box it gave me the option to disable it, which means that it thinks that the device is enabled, which it is not. It is visible in the Device Manager, so it is being recognized. After restarting to come to the same result, I deleted the driver from Device Manager and re-installed it, which didn't work. (I don't remember if I attempted a roll-back, although if I did then it obviously didn't work either.)
Then I went to the Realtek official website and downloaded the Win10 Auto-installation Program. It asked me to remove the previous installation from Dell, and near the end, it gave me the error, "The Realtek Network Controller was not found. If Deep Sleep Mode is enabled, Please Plug the Cable". And after this, or after deleting and re-installing the Dell driver (I unfortunately don't remember when), the ethernet device disappeared from the adapter settings. Now there's only Wi-fi there.I really want my ethernet back, even though I have wi-fi to connect to the internet. The only solutions I can see are to either get the Dell driver working or to remove the device from sleep mode.
View 9 Replies
Feb 23, 2016
Recently i have purchased my brand new hp laptop. in my laptop - Microsoft hosted virtual adapter is missing. how can i get/install/ download Microsoft hosted virtual adapter / Microsoft Virtual WiFi Miniport Adapter?
View 1 Replies
Jul 29, 2015
I knew I should've never installed windows 10, but I decided to since it's free and all. When I successfully installed it and tried to connect to wifi, it didn't work. My wifi has small range (so people don't guess the password and use our wifi), but large enough for our whole house. I got right next to my router and it still didn't show up on the Wifi List.
View 1 Replies
Sep 3, 2015
I upgraded from W8 to W10. I have Acer V17. For few weeks, everything seemed to be ok... And then, one week ago, I restarted my computer, and I think I saw some actualisation being installed (I thought I turned them off, but I probably did not...). Since that moment I dont have WIFI. And I mean no WIFI at all - my network center says, there are no WIFI networks to connect to.
But that is not true, because on my phone and other devices, there are WIFI networks. I tried to google the answer and tried few things, but nothing works. In Device manager, my WIFI adapter (Qualcom Atheros) ha yesllow exclamation mark, but when i try to update the drivers, it says, they are up to date... but the exclamation mark is still there, an I have no connection. I am completely hopeless, because I need WIFI for my job. I really hate the moment I decided to upgrade this system.
View 3 Replies
Oct 18, 2015
When I boot up I cannot get connected to my WiFi. The only way to get it to work is to shutdown and boot up again, then all is well.
I never had this problem until Win 10 upgrade.
View 3 Replies
