[Monitor 1] [Monitor 2]
{Taskbar 1} {Taskbar 2}
I want to have it so if I open Chrome is Taskbar 1, it'll open on Monitor 1... and same with Taskbar 2 on Monitor 2.
Right now, they all open on Monitor 2 (primary). How to make it if I click on an icon on T1 it'll always open on M1 and T2 on M2?
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
I have a secondary screen set up for movies or whatever while I play games and other things, there is a problem with dragging any program screen over to the secondary screen. For some reason when I try to drag it over it will just get stuck on the side of the screen and go half or quarter screen rather than breaking through to the other side. Is there a way for me to make it so I can still half and quarter screen but if I keep on pushing it, it will go on through to the second screen? or just make it so I can bring it to the second screen without the snapping?
View 9 RepliesIs there a way to get rid of the feature that means that i have to move my mouse quite drastically to get a window from one screen to the next?
With windows 10 they have given us the ability to snap a window to a side, that's great but when i want to move it to the other screen, its gets irritating, how do i get around this? I just want to disable the snapping of windows when my mouse goes near the middle of my two monitors, it was good on windows 7. I hope i have explained this correctly, its quite difficult mind.
First time user, today, the left side of my monitor screens are cut off, can't see the icons and same when I use my email. Can't recall doing anything to cause this misbehavior.
View 2 RepliesMy taskbar is out of place when I connect the second monitor. I extended the view.
It happens now and then. I think it seems to be working fine until I install the internet download manager. But again it might just be my suspicion.
Once I plug out the second monitor, the taskbar goes back to normal. This issue is the same for the wall paper. When i connect, the wall paper will look ok on the laptop but looks cut away in the second monitor. Same thing goes, once I plug out it will go back to normal.
I just updated to Windows 10 and already having problems. I have a dual monitor setup and back on windows 8, both monitors had a good display. Now on windows 10, my main monitor has a blurry or less quality compared to my second monitor. It was always fine until I switched windows.
View 3 RepliesI've got a dual monitor PC running the now released windows 10. Everything about it went very smoothly, right up until I tried to change the background. At first both screens had the same image (that cool windows 10 logo with light beams picture). But of course that wasn't sufficient, so I changed it. I liked that windows 7 would rotate my wallpapers with pictures in my photo library. So I dug in and made the necessary changes, and.... then I hit an odd snag.
The two screens were showing different background pictures. At first it was cool! I was blown away. I never even thought about changing the wallpapers separately! But, I'm a creature of habit. And having that second monitor with a different wallpaper was getting on my nerves. Now, I know I can change both wallpapers to be the same picture. BUT, I'm greedy and want it all! I want it to also show the slideshow of all the photos.... one at a time, on both screens, at once.
On a side note, whenever I right click the desktop and ask windows to skip ahead to the next desktop background, it does one screen only. I have to do it again and then the other screen will change. If they HAVE to be separate, I'd at least like some control over them.
I have Dual Monitor but both have different resolutions.
Main one is 1920 x 1080 and other one is 1280 x 1024.
I want to set the same wallpaper on both but this is how it looks:
It's displaying nicely on the second monitor with black on the top and bottom.
But on the first one there's black on left and right of the screen. This is with every wallpaper I use. I am using the "Fit" style for Wallpaper.
I had Win7 and did the free upgrade to Win10.
Before the upgrade I was smart enough to do a complete system image of Win7.
1. If I disconnect the Drive that Win10 is installed on and reinstall Win7 on a different drive, can I use the system image to recover Win7 back to the state it was before the upgrade?
2. Reconnect the Win10 drive and and boot up the system, will system ask which OS I want to boot up with at that point or will there be a conflict?
It's not that I don't like Win10 given I just upgraded on Thursday, September 17th and I need time to fully go thur all the operations and functions. I want to get a reasonable working knowledge and understanding of the Win7 OS, till I do I want the ability to keep and use Win7.
It took me quite some time to migrate from XP Pro to Win7 because I created a dual boot system for that purpose and I do not want to be FORCED cold turkey to switch to a new OS till I am ready to do so.
I am running Windows 10, and trying to calibrate my monitor which is the #1 monitor on a dual monitor setup. I am using the Spyder 4 Express for calibration.
When I put the calibration device on my #1 monitor and go through the calibration process, it saves the new profile, but the new profile does not correct the #1 monitor, it is effecting the color of the #2 monitor.
I'm trying to adjust my snap/multitasking settings to keep all of the snap settings in Windows 10 except for the ones that try to snap windows to the side of one monitor when I try to drag it to the other monitor. Is there any way to disable the snapping between the two monitors while still keeping the snap settings of dragging windows to the opposite sides/top of the screen?
View 1 RepliesI've recently setup a secondary monitor, but the mouse simply wont lock into the screen where the game is being played (total war) and if i do end up clicking somewhere on the secondary monitor the game will be minimized which is bothersome, I have tried borderless and fullscreen but in vain.
Another issue I've had is that the secondary screen (1600x900) gets some flicker/lines whenever i use vga to connect it, but it works superb with dvi, why?
Now another thing is that when i move the mouse/cursor from the top right corner of the main monitor(1920x1080) it wont switch over to the secondary one(my idea being that the res/size is different).
video example: example - YouTube
After upgrading to Windows 10, the "extend displays" function is not functioning well on my PC (ASUS monitors; ATI Radeon HD 2400 PRO display adapter). I have tried disconnecting & reconnecting and have tinkered with most related settings I am aware off, but all in vain.
I found a crude workaround accidentally. I restart my PC from the log in screen until the dual monitors start in the extended view (how this works!). It usually takes about two to three restarts.
GOAL: Create a dualboot system with a clean WIndows 10 installation on SSD while keeping my regular Windows XP for as long as I need it.
SITUATION: Monoboot system booting Windows XP from a regular HD. I already purchased an SSD for Windows 10, but need to install it.
QUESTION: Which steps (and in which order) should I take to make my goal as stated above achievable without (too much) hassle. I was advised by a friend to simply install the SSD, then start installing Windows 10 and everything would be ok as W10 would recognise the existing XP installation.
How to create a shortcut to the Reliability Monitor?
View 2 RepliesSo after playing around the W10's virtual/multiple desktops for a while, I have realised two things :
1. Each desktop can't have it's own background.
2. You also can't customize each desktop so they have their own sets of icons/apps/programs in their taskbars/desktop area.
So, my question is this...what's the point? If I can't customize each desktop so it looks independent from the others, then what is the actual point in having multiple desktops? Again, I'm almost certain I'm missing something here, but if I'm not this is one of the most useless features of W10 IMO.
I use an independent email provider , not through Microsoft, which has always been fine until 16th of this month when it stopped working via my laptop and I cannot find out how to resolve the issue...
View 1 RepliesI installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 RepliesI am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
I have the "Turn off display after" set to 20 minutes: but they aren't timing out. What might be keeping this from working? Another setting? Some program is keeping it from timing out?
View 1 Repliesi switched from windows 10 to windows 7 and now on my main monitor i have a taskbar but on the other i dont ? why
View 1 RepliesI have an Ssd and a wuad core i7 so it shod be done by now by my monitors have had a black screen for over 2 hours now. Even after restarting and unplugging it still boots to a black screen now and I cat even boot to BIOS. What can I do
View 4 Replies