when i try to auto login it comes up invalid pass/user. all of a sudden a new user has appeared
manage accounts shows only 1 user
netplwiz shows only 1 user
Attachment 41142
all default accounts are disabled
Where has this new user come from and how do i get rid of it so i can have my auto login back
I'd like to use Prey project on my notebook. I recently updated from windows 8 pro to windows 10. Prey software is effective only if thief can use my notebook.
I set up guest account without password but every time i start computer I have to enter username and password. the same situation was when i used win8. I tried this Sign in - Show All Users or Last User in Windows 8.
Also created aconther account with password- still i have to enter username.
How can i get windows to list users on startup? Or alternative to Prey project?
I'm running Widows 10 on my MacBook via Parallels Desktop. When the W10 login screen appears, I get my user name appear and it logs itself in but is declined. Next, my user name is displayed twice and I click the top one and enter my PIN number and I'm logged in. I would like to delete the second user name display.
View 4 RepliesI have Windows 10 v1511 Enterprise 64 bit.
From the Command Prompt, run as administrator, how should I do to remove any TrustedInstaller or Authenticated Users or System users from the ACLs of an entire directory structure also contains files and links (this must not involve the ACLs of their destination)?
I cannot give a lot of details about the PC because it is not mine and the user does not want to give a lot out (not sure why). However, it has Windows 10 64-bit and is very powerful (i7, 16 GB ram, 2TB hdd). Whenever I go to switch users or log off, the screen goes black. There is no cursor and the keyboard buttons stop working (i.e. light for Num Lock doesn't light up). The only way to get back onto the computer is to force shutdown by holding the power button. There are no problems with the initial boot or login, only when you go to "switch users" or "log off". The computer resources are not being taxed and the heat is in control. I do not receive any BSOD, only a black screen with no response.
I have tried:
- Removing an update from Windows 10 that caused boot loops
- Rolling back video driver
- Installing NVIDIA driver updated 10.7.2015
- Ran sfc /scannow (found errors but couldn't fix it)
- Ran DIMS after and it found nothing to remove
- Ran dskchk and did not have any problems
- Searched over five hours for a solution
- Changed power settings to never sleep for: Display, PC, HDD
- Disabled USB service that was causing a different issue
- No egregious problems in Event Viewer
- I checked registry for proper paths before and after sleep mode/shut down/boot and that was also fine (explorer.exe I believe)
My friend says that, in no way, will he reload Windows 10 because it was just recently loaded and was working originally.
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I reinstalled windows the day before yesterday and since then every time I turn my laptop on after entering my password the screen turns off for like 2 seconds then turns back on. This have never happened to me before. I tried putting my old windows back via Macrium Reflect and I even tried reinstalling it again but neither of those things worked. I have an Acer Aspire V3-572g laptop.
View 9 RepliesI upgraded from Windows 8 to 10 without a hitch an hour ago and kept all of my personal files and apps. I set up my start menu and everything was working fine, but I wanted to change the image on the logon screen (or whatever you call the screen in between the lock screen and the screen where you enter your PIN/info). So I took a risk and downloaded the 3rd party app here:
[URL] and uploaded an image and hit apply. Of course right after doing that I went to lock my PC to see if it worked, and as you can tell... it didn't.
I've tried rebooting and it hasn't worked. It's just very rapidly flashing between a blue screen w/ a loading circle and my lock screen image.
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
While logged in the systems goes back to the login screen. I have checked all of the display and screen saver settings. But after a reboot it still happens after just a few minutes.
View 3 RepliesSo.. I screwed up.. I used a small program called something like Windows 10 Login Background Changer (something along those lines) and when I restarted my computer, it never reached the login screen. I can move the mouse and open Magnifier (was pushing random controls), but I don't know how to get past here.
View 7 RepliesI tried to install Windows 10 fresh from a usb but it said my Windows 7 key didn't work and I never got a Windows 10 key so I'm not sure what to do, the upgrade install won't login. I enter password, then proceed but it locks up. if I click anywhere after a minute the screen goes black ave nothing happens.
a: where to get the Windows 10 key so I can do a fresh install
or b: how to fix this login screen
I tried safe mode repair but it said it's unable to repair and I should restart the pc.
I have just upgraded from build 9926 to build 10041 and now I have s major problem with the login screen. It won't respond and no matter what I do with my mouse or keyboard it respond. The clock still changes however which us kinda strange. Here is a pic
View 9 RepliesHow can I get rid of the login requirement when booting into Win 10. It is bad enough that it DEMANDS a login on a home personal PC (If someone is in my house then I have been broken into), BUT MS goes farther and insists it has to be a passwork of a certain strength containing this many characters and so many upper and numeric - there has to be a way to defeat this. I tried leaving the field blank and it will have nothing to do with that.
View 19 RepliesWindows 10 loads and all good, after typing in password all good, programs load, then after 10 seconds black screen with mouse cursor active, if I run a command prompt and type in explorer.exe the desktop comes back for 10 seconds then back to black screen, I run a nviadia 460 GTX, I'm assuming theres some driver issue, have installed latest driver but same result.
View 2 RepliesHow to remove a login screen in windows 10?
View 6 RepliesI just installed Windows 10. The install went fine, but now I am at the login screen, and that is as far as I've gotten. I have the option to click on all of the buttons on the login screen, but as soon as I click one, be it hitting enter after entering my password, or hitting the next button, or clicking "I'm not Eric", it freezes.
I can't click anything, the button I clicked stays the color it looks when you press it. I then continue to click until the loading wheel appears, then the screen gets the white haze like a program isn't responding, and then goes black and reboots. I can click on the clock looking image that gives you some options, and I can click and unclick those, but as soon as I try something else, freezes.
System meets the requirements, have a genuine copy of windows 7 ultimate, downloaded windows 10 from the media launched or whatever it's called that you can bypass the wait time for receiving the update. It was from the window site, so I feel comfortable in believing it isn't a fake or anything.
EDIT: When I turn on the narrator, everytime I make a key stroke it says "Hidden", not sure what the entails
I got updated to Windows 10 from Windows 8.1 yesterday, everything was as it should be, but today I got a new Driver Update from Nvidia for Specially for Windows 10 It installed fine and asked to restart so I did and it restarted like normal until It asks to type my password in after that, I get a Black screen after I type in my password it has the mouse pointer and Ctrl+Alt+Del works I tried to open task manager(to manually run file explorer.exe) but it won't work I have an acer laptop(E5-573G-76NF) and I don't have the Windows disk to access recovery options as windows 8.1 pre-installed so I can't Do a system restore.
View 1 RepliesSo today after updating my Windows 7 laptop to Windows 10 everything was fine I managed to open the Windows 10 desktop and then it said that is has to update the Windows.I left it to update and when I returned I found a blue error screen saying "Windows encountered a problem and needs to restart".And now when I boot the PC it keeps on restarting and can't even reach login screen.The Windows is genuine it was preloaded on the laptop when I bought it and also I don't mind losing my data I just want to fix the laptop.I don't have a disc to use for repair and even don't know how to repair. system thread exception not handled athwbx.sys is the error and I can boot in Safe mode.
View 1 Replieswhen I start up windows 10, type in my password and hit enter, it takes a bit longer to load and but doesnt even load my desktop. I can ctrl+alt+del to get task manager going and open up chrome with that, but it wont load any web pages. I didn't change anything the day before so I dont know whats up. I tried booting into safe mode but it still does the same thing. Luckily I had my old hard drive with 8.1 still installed so I could get on, and everything works fine on it.
View 1 RepliesI'v try to change a LogIn screen whit an managed picture of our company in sted of Enable or Disable LogIn screen.Is there way to change tath "img0.jpg" tath apear onder the accountpicture on login trougth regedit or gpedit or GP on AD, and not using tird party modifying tools like "W10 Logon BG Changer" or else. Just making an 'GoldenImage' for WDS on WS2K12R2
View 1 RepliesI installed windows 10 on my machine last week which went fine with no errors. Since then, I have come into work everyday and found the computer idling at the login screen, flashing and not responding. Just a constant flashing until I turn it off. Because of this I've had to reset windows under the troubleshoot option on start up. Safe mode doesn't work, and back up restore doesn't either. I wanted to add that I don't receive an error code or message.
View 4 RepliesI get to the login screen that says "Hi there, welcome back!", and when I press the "Next" button the login screen takes a long time and I get a loading cursor. If I press anything after that, the computer restarts itself and the problem begins again. Due to this, I can't even access my computer.
View 2 RepliesI just bought this computer a few weeks ago and this problem has been persistent since I've gotten it. sometimes when I login, the screen is black or partially black, the rectangle for my pin is still visible however. My screen is touchscreen. I can "erase" the black with my finger and the normal login screen appear underneath. Inputting my pin is no problem and after login I don't see this problem anywhere else.
View 5 RepliesI use a good password in the windows login screen, but I was wondering, how hard (or easy) is it to break past this screen.
In old versions, you could go to dos mode and then just "dir" your way around and everything was visible.
When the win 10 login screen comes up, clicking on the password box does nothing and the password cannot be entered. What do I do?
View 2 Replies